- “Dentfix DF-119 Pointer Holder for DF-3 Tram” already exists in your wishlist
-
Dentfix DF-118A Short Pointer for DF-3 Tram (280mm)
DentFix DF-118A Short Pointer for DF-3 Tram (280 mm)
$35.49$44.92Dentfix DF-118A Short Pointer for DF-3 Tram (280mm)
$35.49$44.92 -
Dentfix DF-SG70 Suction Gun
Dentfix DF-SG70 Suction Gun – Produces suction or vacuum that locks in place to create a handle for moving objects like glass and removing taillights.
Quick & Easy Simply press rubber against the surface and squeeze the trigger
Comfortable Pistol grip handle fits perfect in the hand
Safety Move awkward objects in a safe manor
Save Parts Remove snug parts with ease and less chance of breakage.
Rubber pad is 2.75 in diameterMaterial and Surfaces – Can be used with most no porous surfaces as long as a vacuum can be maintained. Intended surface must be clean and free of debris. It is best to wipe the rubber pad before use to remove any dust that might have accumulated.
Ergonomic Handle
Disengage Button
Large Rubber Suction Pad$24.15$30.57Dentfix DF-SG70 Suction Gun
$24.15$30.57 -
DentFix DF-EZN1G EZ Nitrogen Plastic Welder – Generator
The DF-EZN1G EZ Nitro Plastic Welder Generator eliminates the need for refilling nitrogen tanks and has a smaller footprint taking up less space in the shop thanks to its onboard nitrogen generator. The proprietary Flow Adjust Switch Technology (FAST) system makes the DF-EZN1G the easiest nitrogen welder to learn and use. It simplifies nitrogen welding and eliminates flow adjustments by the user. This significantly reduces the time to set up the welder and gets the work done FAST.
Equipped with two welders, the DF-EZN1G EZ Nitro Generator incorporates both a nitrogen welding torch and an airless welding torch. The nitrogen torch is air cooled. It is essential to establish and maintain air flow before turning the welder on, and air flow must be maintained until the nitrogen torch cools down. (Usually 10 minutes to cool down after powering down)
The unit comes with plastic rod in various types and sizes to enable the user to weld different types of plastic and different types of damages. Also included is a roll of aluminum tape to hold parts together when welding. The hand seaming tool help shapes, flatten, and insure that repaired flanges and tabs are the correct thickness.
The cart is equipped with a heat gun holster, and a power strip for powering other tools.
The welder uses 110volts and a maximum of 10amps, total consumption is a maximum of 600watts.$4,386.64$4,984.81DentFix DF-EZN1G EZ Nitrogen Plastic Welder – Generator
$4,386.64$4,984.81 -
Dentfix DF-C3812 Kool-Cut Sander Kit
DentFix DF-C3812 Kool-Cut Sander Kit – Compounded Cooling. Backing pad scoops air forcing dirt and debris away, keeping disc clean. Forced air cools sanded panel preventing heat warping. View ports provide clear view of work area. Quick-Attach system allows faster changing of sanding discs without extra tools. Pistol grip grinder is lightweight and easy to operate. Perfect for use with aluminum. Designed and patented in the U.S.A.
Torque .37 kW Air Pressure 6.3 bar Air Consumption 220 l/min / 7.76 cfm Size of Pad 5″ (127 mm) Air Inlet 1/4″$148.78$198.37Dentfix DF-C3812 Kool-Cut Sander Kit
$148.78$198.37 -
Dentfix DF-1465 6.5mm High Speed Steel Cobalt Spot Weld Drill Bit – Germany
DentFix DF-1465 6.5mm HSCO Spot Weld Drill Bit – Germany – approximately 1/4-inch High Speed Steel Cobalt (HSCO) spot weld bit. The twist is smaller than the shank which is 8.0mm and has a flat spot on it to be tightened into our DF-15 Series Spot Weld Drills. This German made bit may be used with off brand spot weld drills. Our drill bits are specifically designed for the abuse of spot weld drilling. Flat ground for strength, centering nib to prevent walking. Our German made spot weld bits are available in 3 sizes, 6.5, 8.0 and 10.0 mm. These Cobalt high-speed steel mix bits are 45mm long and work with all brands of spot-weld drills. Titanium (gold color) is a heat resistant coating that extends drill life by about 50%.
$20.19$25.56 -
Dentfix DF-900BFH Body File Holder
Dent-Fix DF-900BFH Body File Holder
1 – 14″ Body Flex File Holder (350mm)
$80.34$103.66Dentfix DF-900BFH Body File Holder
$80.34$103.66 -
Dentfix DF-503P Pin Electrode for DF-505 Maxi
DentFix DF-503P Pin Electrode for DF-505 Maxi
Welds stud pins to the car panel for pulling to remove dents.
$20.94$26.51Dentfix DF-503P Pin Electrode for DF-505 Maxi
$20.94$26.51 -
Dentfix DF-505CB2 220v Circuit Board for DF-505 Maxi
DentFix DF-505CB2 220 Volt Circuit Board for DF-505 Maxi – circuit board tells the unit to weld, shrink, turn on or off and what the voltage is.
PDF drawing available upon request.$195.38$260.50Dentfix DF-505CB2 220v Circuit Board for DF-505 Maxi
$195.38$260.50 -
Dentfix DF-SPR70 Self-Piercing Riveter – 10T
Dentfix DF-SPR70 Self-Piercing Riveter – 10 Ton – a reliable tool for riveting aluminum panels (up to 6.5mm with the rivets included in the kit but with optional longer 11mm rivets it can be used to assemble panel thickness of 8 to 9mm) together with high dynamic strength.
• 10 TONS – High pressure SPR capable of handling heavy duty installs.
• PRESSURE CONTROL – Adjustable dial with an easy to read gauge for ultimate control.
• ARM SWIVELS 360˚- C-Arm swings around into multiple positions for maximum access flexibility.
• ERGONOMIC HANDLE – Comfortable operation and stability.
• MAGNETIC DIE- Makes rivet positioning effortless and simple.
Kit includes matrices (3mm SPR, 5mm SPR, Extracting, Flow Form, 6.5mm Hole Punch), 2 matrix keys, center punch, strap, HR110 arm, a sample box of a variety of steel punch rivets, and a carrying case.
2 Year Mnaufactures warranty Warranty.
$7,979.78$9,067.93Dentfix DF-SPR70 Self-Piercing Riveter – 10T
$7,979.78$9,067.93 -
DentFix Z020 Tornado Black
DentFix Z020 Tornado Black-
The DF-Z020 Tornador Black
Newly developed rotational technology inside the funnel to provide faster
More powerful cleaning compared to the Df-Z020 Tornador Pulse Cleaning Gun.
For Professional detail people will love the speed and effectiveness of the Tornador Black.
New design reduces wear and ensures a longer life and superior performance.$216.92$289.22DentFix Z020 Tornado Black
$216.92$289.22 -
Dentfix DF-1480 8.0mm High Speed Spot Drill Bit
DentFix DF-1480
8.0mm HSCO Spot Weld Drill Bit
5/16″ High Speed Steel Cobalt (HSCO) spot-weld bit.
Twist same size as shank
fFat spot on it to be tightened into our DF-15 Series Spot Weld Drills.
This German made bit may be used with off brand spot weld drills.
Bit also offered w/ Titanium heat resistant coating as part # DF-1680T.
Bits are available in 3 sizes, 6.5, 8.0 and 10.0 mm.
Bits are 45mm long and work with all brands of spot-weld drills$19.23$24.34Dentfix DF-1480 8.0mm High Speed Spot Drill Bit
$19.23$24.34 -
