Dentfix DF-DB79K Dead Blow Hammer Kit with 6 Tips – a unique Dead Blow Hammer that can adapts to the technicians paint less dent repair (PDR) tool needs with interchangeable tips. The dual head gives the user two striking ends to knock down high spots on dent repairs. Depending on the situation the steel metal tip can be used for bare steel panels.

Kit includes 6 different interchangeable screw on tips:
• Aluminum Round
• Steel Round
• Rubber Round
• Plastic Flat
• Brass Round
• Brass Flat

When working with aluminum panels use the aluminum tip to prevent contamination. The rubber or plastic tips can be used for a softer touch when performing paint less dent repair on painted aluminum or steel panels (do not cross contaminate). Both brass tips are non-sparking. Also includes blow-molded storage case.

Blowback is eliminated thanks to the dual flex neck that cushions each strike. Flip the tool over and the chiseled end is perfectly suited for prying off door trim panels or removing glue residue and glue attached PDR pulling tabs. The tool is seven inches in overall length.

Dentfix DF-DSP310 Door Skin Pliers – Single

LARGE RUBBER PAD – Prevents the risk of damaging the front door skin.
T-BAR – Spreads the clamping force and the cushioned outer pad prevents paint marring.
ADJUSTABLE & LOCKABLE – Customize the clamp to perfectly to the required opening and position needed.
CONSTRUCTION: Steel

The Door Skin Pliers are a high quality, adjustable locking clamp specifically designed to hold a door skin in place while allowing full access to the rear door frame flange. Equipped with a large rubber pad on the front to prevent the risk of damaging the front of the door skin. The “T” bar on the rear side of the clamp allows the user to clamp down the door skin and hold it while bending the skin flange around the door frame.
**It is recommended to use in pairs.

The DF-EZN1G EZ Nitro Plastic Welder Generator eliminates the need for refilling nitrogen tanks and has a smaller footprint taking up less space in the shop thanks to its onboard nitrogen generator. The proprietary Flow Adjust Switch Technology (FAST) system makes the DF-EZN1G the easiest nitrogen welder to learn and use. It simplifies nitrogen welding and eliminates flow adjustments by the user. This significantly reduces the time to set up the welder and gets the work done FAST.

Equipped with two welders, the DF-EZN1G EZ Nitro Generator incorporates both a nitrogen welding torch and an airless welding torch. The nitrogen torch is air cooled. It is essential to establish and maintain air flow before turning the welder on, and air flow must be maintained until the nitrogen torch cools down. (Usually 10 minutes to cool down after powering down)

The unit comes with plastic rod in various types and sizes to enable the user to weld different types of plastic and different types of damages. Also included is a roll of aluminum tape to hold parts together when welding. The hand seaming tool help shapes, flatten, and insure that repaired flanges and tabs are the correct thickness.

The cart is equipped with a heat gun holster, and a power strip for powering other tools.
The welder uses 110volts and a maximum of 10amps, total consumption is a maximum of 600watts.

The EZ Nitro Plastic Repair Station – Extended: Engineered to meet the needs of Premier Auto Body Shops everywhere. Utilizing an Award Winning Nitrogen Plastic Welder with a Dual Chamber Nitrogen Generator, the DF-EZN1G/DXE converts shop air into nitrogen and there is no need to refill nitrogen bottles! The easiest to use and most capable plastic welder station EVER, by Dent Fix!

The proprietary Flow Adjust Switch Technology (FAST) system makes the DF-EZN1G/DXE the easiest nitrogen welder to learn and use. It simplifies nitrogen welding and eliminates flow adjustments by the user. This significantly reduces the time to set up the welder and gets the work done FAST.

In addition to a nitrogen welder the kit also includes a thermoplastic hot stapler kit, complete with 7 variety of staples, three mini die grinders with 3 different bits, hand seamer, heat gun, ring hammer, multi-clip pliers, shaping tools, trim removal tools, and a variety of plastic welding rods (ABS, Polypropylene, Polycarbonate, Polyethylene, and Polyurethane).

As added bonus, a high pressure N2 Outlet gives you the ability to attach air-powered tools to the side of the unit and run on nitrogen! Nitrogen is beneficial because it has a lower moisture content, compared to shop air, which helps safeguard the internals from corrosion.

The DF-EZN1G/DXE EZ Nitro Plastic Repair Station by Dent Fix Equipment is everything you need your plastic repair station to be and more.

Kit Includes:

EZ Nitro Plastic Welder with Nitrogen and Airless Plastic Welding capabilities
On-board Nitrogen Generator – Creates nitrogen from the atmosphere eliminating the need to refill bottles!
Hot Stapler – Deluxe Kit with 7 varieties of StapleClips (DF-800BR)
Assortment of Plastic Welding Rods (ABS, Polypropylene, Polycarbonate, Polyethylene, and Polyurethane)
Three (3) Mini Die grinders with 3 Unique Bits
Electronic-Controlled Heat Gun (DF-900HG)
Double End Nylon Dolley (DF-900DEND)
Round Head Nylon Chisel (DF-900RHND)
Aluminum Tape (DF-EZN1-AT150)
Multi-Clip Pliers (DF-625)
Plastic Clip Pliers (DF-624CP)
Clip Lifter (DF-618CL)
Hand Seamer (DF-EZN1HS)
Ring Hammer (DF-903)
Dust Cover
Utility Wedge Set (DF-609)
Plastic Lever Scraper (DF-WK20)
Heat Gun Holster
Lockable Cabinet with Keys
5 Year Manufacturer Warranty