-
Dentfix DF-DSP310 Door Skin Pliers
Dentfix DF-DSP310 Door Skin Pliers – Single
LARGE RUBBER PAD – Prevents the risk of damaging the front door skin.
T-BAR – Spreads the clamping force and the cushioned outer pad prevents paint marring.
ADJUSTABLE & LOCKABLE – Customize the clamp to perfectly to the required opening and position needed.
CONSTRUCTION: SteelThe Door Skin Pliers are a high quality, adjustable locking clamp specifically designed to hold a door skin in place while allowing full access to the rear door frame flange. Equipped with a large rubber pad on the front to prevent the risk of damaging the front of the door skin. The T bar on the rear side of the clamp allows the user to clamp down the door skin and hold it while bending the skin flange around the door frame.
**It is recommended to use in pairs.$24.15$30.57Dentfix DF-DSP310 Door Skin Pliers
$24.15$30.57 -
Dentfix DF-503KF Weld Keys – Flat, 100/Pkg
Dentfix DF-503KF Weld Keys – Flat
Quality weld keys for steel bridge pulling.
Flat shaft intended for panel repair pulls. 100 pcWith the DF-503KEM Magnetic Key Electrode and DF-505 Maxi (both sold separately), the keys can be welded to steel panels. The DF-505BP Bridge Puller (sold separately) can then be used to perform a controlled pull and repair.
$54.33$70.10Dentfix DF-503KF Weld Keys – Flat, 100/Pkg
$54.33$70.10 -
Dentfix DF-1690 Tungsten Carbide Drill Bit for Boron, 3 Edge Special Coating
DentFix DF-1690
8.0 mm Drill Bit
Tungsten Carbide Drill Bit for Boron
Drill through Boron Steel is with this bit.
Cuts spot welds from Boron Steel.
Special multi-layered coated,
Drill through and survive Ultra High Strength Steel, aka “Boron Steel”.
Used with our original red ringed 1800-rpm drill or blue ringed 1000-rpm drill.
Not recommend this bit be used with off brand copies of our drill.
Proper precautions must be taken to ensure the long life of this bit.$80.81$107.75 -
Dentfix DF-1780 8mm x 80mm HSCO Spot Weld Drill Bit (Replaces DF-611)
DentFix DF-1780 8 mm HSCo Spot Weld Drill Bit – Specifically designed for the rigors of spot weld drilling, these German made bits can be used with any 3/8-inch drill. Centering nib prevents bit from walking. Sold individually.
$16.83$21.30 -
Dentfix DF-900BHND Bolster Head Nylon Dolly
DentFix DF-900BHND Bolster Head Nylon Dolly
$84.91$113.21Dentfix DF-900BHND Bolster Head Nylon Dolly
$84.91$113.21 -
DentFix WK20 Plastic Lever Scraper
DentFix WK20 Plastic Lever Scraper- Designed specifically for windshileds this tool has found its way into many other uses. Any time you need a tool that will not scratch soft surfaces. Work on the dash, door panel, remove vents and scrape painted surfaces.
$5.21$6.72DentFix WK20 Plastic Lever Scraper
$5.21$6.72 -
Dentfix DM510DBW PDR Striped White Ding Board
DentFix DM510DBY PDR Striped Yellow Ding Board
$75.71$100.94Dentfix DM510DBW PDR Striped White Ding Board
$75.71$100.94 -
Dentfix DF-702SF Stainless Steel Fine Belt, 23mm, 0.5 Wire, Straight Tip
DentFix DF-702SF Stainless Steel Fine Belt, 23mm, 0.5 Wire, Straight Tip
$54.50$70.32 -
Dentfix DF-505DM MAXI Massager
Dentfix DF-505DM MAXI Massager – The perfect addition to the Maxi Steel unit (DF-505, sold separately)!
Simply slide the weld rod on the Maxi handle through the Maxi Squeeze Puller and easily massage out steel dents with unrivaled control.
$114.13$130.43Dentfix DF-505DM MAXI Massager
$114.13$130.43 -
Static Gun – DF-EZAP – By Dent Fix
Dent Fix DF-EZAP StaticZap – anti-static device that keeps the surface clean during the paint process to avoid unnecessary reworking and buffing, saving both time and money.
Static attracts dust and unwanted particles, making it very difficult to keep surfaces clean and causing blemishes in the paints finish and other work surfaces. Its absolutely essential to eliminate static from the environmentat every stage of paintingin order to avoid costly reworking.
The StaticZap incorporates the efficiency and power of an air amplifier with the proven technology of corona ionization to produce a highly effective anti-static blow-off gun. Perform the anti-static blow off before starting and at every stage in the painting process to eliminate fisheyes and produce a finish that looks like glass.
The two-minute anti-static process will eliminate the need for wet sanding and buffing which saves time on prep work and also cuts down on labor and materials.
The Kit includes a lightweight, durable gun, rechargeable lithium ion battery, two emitter pins, and safety keys.
$1,196.25$1,595.00Static Gun – DF-EZAP – By Dent Fix
$1,196.25$1,595.00 -
DentFix WK20/10 Package of 10 Winshield Sticks
DentFix WK20/10 Package of 10 Winshield Sticks
$50.77$65.51DentFix WK20/10 Package of 10 Winshield Sticks
$50.77$65.51 -
Dentfix DF-595II Hammer Head Removal System
Dent Fix DF-595II Hammer Head Dent Removal System –
Replace your stud welder with the 110 volt DF-595ii HammerHead. Same great quality, same essential accessories that provides the technician with the means to higher productivity and better results. It’s like having sticky fingers and being able to pull dent with your hand.
110 Volt
1 year warranty.
60Lbs
Formerly Know as Shark 2 Dent remover (Name changed by Manufacturer)
Included Items:
Weld pin Tip (1), Washer Tip (1), Shrink Tip (1), Wiggle Wire Tip (1), Short Pull Rod (1), Slide Hammer With Rod and Weight (1), Leverage Rod (1), Ground Magnet (1), # Finger Claw, & 1Pound of Wiggle WireMade in China. 1 year warranty. Use with a 30 amp breaker.
$1,396.34$1,586.75Dentfix DF-595II Hammer Head Removal System
$1,396.34$1,586.75
