DentFix 1680TC 8.0mm TiCN Titanium Carbo Nitride- 8 mm or .314 inches. The Titanium Carbo Nitride (TiCN) coating on this bit will lower friction and keep the edge sharp longer than regular drill bits. The twist is 10mm and the shank is 8.0mm and has a flat spot on it to be tightened into our DF-15 Series Spot Weld Drills. Our drill bits a specifically designed for the abuse of spot weld drilling. Flat ground for strength, centering nib to prevent walking. These German made spot weld bits are available in 2 sizes: 8.0 and 10.0 mm.

DentFix DF-505 Maxi Dent Removal System 110 Volt

MAXI DF-505/110V
WELD – PULL – TWIST
Provides power needed to shrink, pull rocker panels, hail damage, creases, dents
Increases workers productivity while producing a cleaner, better repair.
Versatile tool will Weld Pins
Weld a slide hammer directly to the panel
Weld a light pulling rod
Weld wiggle wire for even crease pulling
Weld a rod for leverage pulling
Shrink metal
5 Year Warranty
Made in USA
Complete kit includes

110 volt unit
two light pulling rods
two slide hammer rods with strike weight
stud pin electrode, shrinking electrode, wiggle wire weld tip
nine and four finger “Bear Claw”
optional DF-509 rolling cart is available separately.
Complete kit includes: “The Maxi” 110 volt unit, two light pulling rods, two slide hammer rods with strike weight, stud pin electrode, shrinking electrode, wiggle wire weld tip, a nine and four finger “Bear Claw”, 500 stud weld pins, 1 pound of wiggle wire, 21 feet of power cable, and nine feet of welding cable.

Taking the idea of a stud welder one step further, this versatile tool will: 1. Weld pins 2. Weld a slide hammer directly to the panel 3. Weld a light pulling rod 4. Weld wiggle wire for even crease pulling 5. Weld a rod for leverage pulling 6. Shrink metal

Dentfix 600BR LI-ION Battery Hot Stapler – Specially designed to repair small to medium size damage in automotive plastic parts such as bumpers, headlamps, or mirror caps.

CORDLESS OPERATION – No cord to get in the way while performing a plastic repair.
HOT STAPLER TIP – Reinforce plastic repairs with staples. Tip has multiple holes to hold the staples at different angles.
SPREAD/PATCH TIP – Install wire mesh over cracks and weld plastic over top.
AIRLESS WELDER TIP – Feed plastic rods through the guide port for effortless welding.

Kit Includes:
3 Tips
Plastic carry box with fitted foam liner
Plastic rods
Steel Mesh
Thermal staples

High Grade Battery: LITHIUM-ION 2400mAH
Charge Time: 3-5 Hours
Charger: USB Port 5V
Run Time: 35 min. for Plastic Weld or 150-200 Staples for Hot Stapler
Overcharge Protection: Yes, Circuit in PCB
Cool Down Stand: Yes
Indication LED: Red = Shortage, Green = Full