-
DentFix MatchRIGHT MatchHEAD 3 Color Matching Head Lamp
UPC: 811662033400
The MatchRight DF-MR003 MatchHEAD 3 Color LED Head Lamp is a super bright rechargeable head mounted flood lamp. Mounting it on the user’s head, the lamp illuminates whatever area the user is facing but it also frees up their hands to concentrate on performing the task at hand. Motion Sensor Mode allows the user to simply wave their hand in front of the lamp to turn on and off the LED light. An impact and moisture resistant body protects the unit against falls and spills. An adjustable elastic headband with comfortable grips helps keep the lamp in place all day long. The included USB charger is able to charge the unit in 3 hours. On a full charge the MatchHEAD will last for 3 hours.
FEATURES:
Hands Free Operation: Super bright 160 Lumens LED is worn on the users head to light up the area where the user is looking with no need to for an extra helper to hold a lamp or struggling to find a mounting location.
3 Light Colors – 2700K | 4500K | 6500K
Motion Sensor Mode – No need to stumble to find the switch, simply waive your hand in front of the light to turn the lamp on and off.
60° Adjustable Bracket – Easily point the lamp downwards to illuminate the work area below.
SPECIFICATIONS:
Light Source: High CRI 3 Color COB LED
Luminous Power: 160 Lumen
CRI: 96+
CCT: 2700K | 4500K | 6500K
Operating Time: 3 Hours
Battery: Li-Po 3.7V, 1500 mAh, 5.55Wh
Charging Time: 3 Hours
Charging Input: DC 5V 1A
Degree of Protection: IP 65, IK 07
Operating Temp: 15° F to 105° F
Warranty: 1 YearAPPLICATIONS:
Color matching, polishing, detailing, and general shop use.$88.71$112.29DentFix MatchRIGHT MatchHEAD 3 Color Matching Head Lamp
$88.71$112.29 -
Dentfix DF-I9315CW Cutting Wheel 100 X 1 X 10MM 25 Pc. Set
The DentFix DF-i9315CW Cutting Wheel is a replacement consumable for the DF-i9314 Reversible Air Cut-Off Wheel and DF-i9315CR Long Corner Grinder.
Box of 25 wheels.
$87.02$112.29 -
DentFix 623TPS 27pc Trim Panel Scraper w/Pouch
DentFix Trim Panel Scraper 27pc Set, w/Pouch
DF-623TPS with Pouch
$87.02$112.29DentFix 623TPS 27pc Trim Panel Scraper w/Pouch
$87.02$112.29 -
Dentfix DF-SPD48L Large C-Clamp for DF-15 Drill
DentFix DF-SPD48L Large C-Clamp for DF-15 – This optional C-clamp for the Spot Annihilator allows the technician to bring the drilling point three inches into the panel. Conveniently fits inside the deluxe case and is light enough to use every day.
$85.00$113.33Dentfix DF-SPD48L Large C-Clamp for DF-15 Drill
$85.00$113.33 -
Dentfix DF-900BHND Bolster Head Nylon Dolly
DentFix DF-900BHND Bolster Head Nylon Dolly
$84.91$113.21Dentfix DF-900BHND Bolster Head Nylon Dolly
$84.91$113.21 -
Dentfix DF-900DEND Double End Nylon Dolly
DentFix DF-900DEND Double End Nylon Dolly
$84.91$113.21Dentfix DF-900DEND Double End Nylon Dolly
$84.91$113.21 -
Dentfix DF-900RHND Round Head Chisel Nylon Dolly
DentFix DF-900RHND Round Head Chisel Nylon Dolly
$84.84$113.12Dentfix DF-900RHND Round Head Chisel Nylon Dolly
$84.84$113.12 -
Dentfix DF-900PS 500 Qty Alu Silicon Studs M4X25
The DF-900PS is the consumable silicon stud pins for the DF-900A and DF-900DX. These optional studs are intended for a better stick to aluminum alloy panels used on some Audi’s, Ferrari’s and Lamborghini’s. Bag of 500
$84.22$112.29Dentfix DF-900PS 500 Qty Alu Silicon Studs M4X25
$84.22$112.29 -
Dentfix DF-3TCAS Accessory Tram Points
Dentfix DF-3TCAS Accessory Tram Points – Measuring solo just got easier with this Tram Gauge Adapter Set.
All cones are self-centering for higher accuracy. No more guessing whether your pointers are centered or not!
The two Cones are for holes up to 40mm.
Four Reverse Cones are for bolts and nuts up to 19mm.
Machined aluminum construction for durability.
Fits the 3 Meter Tram Gauge (DF-3TC3A) and 5 Meter Tram Gauge (DF-3TC5A). Tram gauge sold separately.$84.22$112.29Dentfix DF-3TCAS Accessory Tram Points
$84.22$112.29 -
-
Dentfix DF-1690 Tungsten Carbide Drill Bit for Boron, 3 Edge Special Coating
DentFix DF-1690
8.0 mm Drill Bit
Tungsten Carbide Drill Bit for Boron
Drill through Boron Steel is with this bit.
Cuts spot welds from Boron Steel.
Special multi-layered coated,
Drill through and survive Ultra High Strength Steel, aka “Boron Steel”.
Used with our original red ringed 1800-rpm drill or blue ringed 1000-rpm drill.
Not recommend this bit be used with off brand copies of our drill.
Proper precautions must be taken to ensure the long life of this bit.$80.81$107.75 -
Dentfix DF-900BFH Body File Holder
Dent-Fix DF-900BFH Body File Holder
1 – 14″ Body Flex File Holder (350mm)
$80.34$103.66Dentfix DF-900BFH Body File Holder
$80.34$103.66