-
Mo-Clamp 4048 Many Hole Wide Draw Bar
MO-Clamp 4048 Many Hole Wide Draw Bar – Great for bolting to a frame, unibody rail or to other places to make a secure pull. Each bar has a combination of hole patterns to facilitate bolting to a vehicle. May be used in conjunction with various accessory items for specialized pulling needs.
Overall Length: 14-1/2″ (368 mm) Width: 4″ (102 mm) Capacity: 3 tons (2,722 kg) Heat Treated Steel. Made in the U.S.A.
$123.47$167.99Mo-Clamp 4048 Many Hole Wide Draw Bar
$123.47$167.99 -
Mo-Clamp 9450 4 Way Leg with Washer and Bolt for MO-2400
MO-Clamp 9450 4 Way Leg with Washer & Bolt
$121.70$178.32Mo-Clamp 9450 4 Way Leg with Washer and Bolt for MO-2400
$121.70$178.32 -
Mo-Clamp 4153 Hole Plug and Clevis Hook
MO-Clamp 4153 Hole Plug and Clevis Hook – Versatile combination for quick hook-ups and multiple pulls. 18-inches of 3/8″ chain included.
Overall Length: 25-1/4″ (654 mm) Working Load Limit: 6,600 lbs Working Load Limit: Refers to the maximum load (rated capability) in pounds that shall be applied in direct tension to a straight length of chain or attachment. NEVER EXCEED THE WORKING LOAD LIMIT of chains or attachments, even when the item is new and the load limit is uniformly applied. Replacement Parts: #5220 Clevis Pin & Rue Clip Heat Treated Steel. Made in the U.S.A.
$120.36$176.35Mo-Clamp 4153 Hole Plug and Clevis Hook
$120.36$176.35 -
Mo-Clamp 1600 Multi-Anchor Hook
MO-Clamp 1600 Multi-Anchor Hook – A valuable, small hook device for use on both conventional frames and unitized bodies. The different ends are used for a variety of pulls and anchoring. The bottom foot can be used with both Mo-Clamp #2100 and #2400 Multi-Use Adapter Plates for strut alignment corrections.
Overall Length: 7-1/2″ (191 mm) Capacity: 4 tons (3,629 kg) Heat Treated Steel. Made in the U.S.A.
$119.25$162.25Mo-Clamp 1600 Multi-Anchor Hook
$119.25$162.25 -
Mo-Clamp 5616 Door Post Puller/Twister
Mo Clamp 5616 Door Post Puller/Twister
There are three positions from which to pull. For use on bolt-type hinge pillars.
Overall Length: 51/2″ (133mm)
Slots: 1/2 ” x 11/2″ (12mm x 39mm)
Weight: 2 lbs (.91kg)
Capacity: 2 tons (1,814kg)$119.25$174.73Mo-Clamp 5616 Door Post Puller/Twister
$119.25$174.73 -
Mo-Clamp 4145 Double Grab Hook Assembly
MO-Clamp 4145 Double Grab Hook Assembly – For quick shortening of a 3/8″ chain. Another time saving tool. Usually several is a good thing.
Overall Length: 81/2″ (222 mm) Capacity: 10 tons (9,072 kg) Heat Treated Steel. Made in the U.S.A.
$117.62$160.03Mo-Clamp 4145 Double Grab Hook Assembly
$117.62$160.03 -
Mo-Clamp 1150 Chain Spreader Bar
MO-Clamp 1150 Chain Spreader Bar – The Chain Spread Bar enables the body man to make pulls around box rails or other obstacles, while maintaining the distance between pulling clamps.
Overall Length: 11″ (280 mm) Capacity: 5 tons (4,536 kg) Heat Treated Steel. Made in the U.S.A.
$116.96$159.13Mo-Clamp 1150 Chain Spreader Bar
$116.96$159.13 -
Mo-Clamp 1900 Quick Hook
MO-Clamp 1900 Quick Hook – Four hole-size selection for quick hook-ups in existing frame holes for pulling of damaged frames. Uses Mo-Clamp’s easy chain hook-up system. Hole sizes: 1-7/8″ (48 mm), 1-5/8″ (41 mm), 1″ (25 mm), 7/8″ (22 mm).
Overall Length: 6-1/2″ (165 mm) Capacity: 4 tons (3,629 kg) Heat Treated Steel. Made in the U.S.A.
$115.58$157.25Mo-Clamp 1900 Quick Hook
$115.58$157.25 -
Mo-Clamp 5011 #1 Board and Hooks
MO-Clamp 5011 #1 Board and Hooks – Tool board only with hooks.
$114.35$167.55Mo-Clamp 5011 #1 Board and Hooks
$114.35$167.55 -
Mo-Clamp 5623 T23 Hinge Plate with 3/8″ Shackle
MO-Clamp 5623 T23 Hinge Plate with 3/8″ Shackle – Use in existing holes in frame structures or body panels. Comes with #5626 3/8″ Shackle for angle pulls.
Overall Length: 4″ (101mm) Capacity: 3 tons (2,722kg) Heat Treated Steel. Made in the U.S.A.
$114.04$155.15Mo-Clamp 5623 T23 Hinge Plate with 3/8″ Shackle
$114.04$155.15 -
Mo-Clamp 3071 Mo-Ty Chain Tie Down Anchor Pull Pot
MO-Clamp 3071 MO-TY Chain Tie Down Anchor Pull Pot – The harder you pull the firmer it wedges. Allows full 360 degrees of pull without chain touching floor. Can be removed and installed in a different location. When correctly installed, top is flush with floor when not in use. Can be easily cleaned by lifting top. A 3-1/2″ (89mm) cored hole is required in concrete floor.
Capacity: 10 tons (9,072 kg) Heat Treated Steel. Made in the U.S.A.
$110.10$149.80Mo-Clamp 3071 Mo-Ty Chain Tie Down Anchor Pull Pot
$110.10$149.80 -
Mo-Clamp 1800 Track Hook
MO-Clamp 1800 Track Hook – Quick tie-down for track systems or back anchoring on frame racks. Lip can be used for pulling damaged areas; varied multiple uses for chain lengthening or shortening. Slot can be used for chain hook-up. Designed for use with 3/8″ chain.
Gripping Surface: 3″ wide (76 mm) Overall Length: 6″ (165 mm) Capacity: 6 tons (5,443 kg) Heat Treated Steel. Made in the U.S.A.
$110.08$149.77Mo-Clamp 1800 Track Hook
$110.08$149.77
