-
Mo-Clamp 6350 Cable Sling
MO-Clamp 6350 Cable Sling – Wrap around pulls. Can be used as a choker.
Overall Length: 36″ (915mm) Vertical Capacity: 1.5 tons (1,360kg) Choke Capacity: 1 ton (907kg) Basket Capacity: 2.5 tons (2,268kg) Made in the U.S.A.
$58.39$74.15Mo-Clamp 6350 Cable Sling
$58.39$74.15 -
Mo-Clamp 3071 Mo-Ty Chain Tie Down Anchor Pull Pot
MO-Clamp 3071 MO-TY Chain Tie Down Anchor Pull Pot – The harder you pull the firmer it wedges. Allows full 360 degrees of pull without chain touching floor. Can be removed and installed in a different location. When correctly installed, top is flush with floor when not in use. Can be easily cleaned by lifting top. A 3-1/2″ (89mm) cored hole is required in concrete floor.
Capacity: 10 tons (9,072 kg) Heat Treated Steel. Made in the U.S.A.
$110.10$149.80Mo-Clamp 3071 Mo-Ty Chain Tie Down Anchor Pull Pot
$110.10$149.80 -
Mo-Clamp 6306 GM “R” Hook with 3/8″ X 11″ Chain
MO-Clamp 6306 GM “R” Hook with 3/8″ X 11″ Chain – Original shipping tie down for GM vehicles. Excellent around the frame machine to help hold a frame while diamond is being pulled.
Overall Length 9″ (228mm) Capacity 4 tons (3,629kg)
$54.05$68.64Mo-Clamp 6306 GM “R” Hook with 3/8″ X 11″ Chain
$54.05$68.64 -
Mo-Clamp 5818 3″ Down Pulley
MO-Clamp 5818 3″ Down Pulley – A new smaller down pulley from Mo-Clamp provides the same benefits of our 5 down pulley in a smaller version. Made of Mo-Clamp Tru-Tuff steel alloy and covered by our forever warranty, this tool will give you years of trouble-free service. The existing Mo-Clamp Block Pulley Adapter (part number 5811) is interchangeable between the two down pulley tools, giving the technician great flexibility to use the tool which meets their needs and space requirements.
$240.99$353.10Mo-Clamp 5818 3″ Down Pulley
$240.99$353.10 -
Mo-Clamp 4059 5/8″ Screw Pin Shackle
MO-Clamp 4059 5/8″ Screw Pin Shackle
$49.60$62.98Mo-Clamp 4059 5/8″ Screw Pin Shackle
$49.60$62.98 -
Mo-Clamp 0053 A Clamp with Pull Ring
MO-CLAMP 0053 A Clamp with Pull Ring – The A Clamp grips narrow seams and ridges. Hardened steel cross-hatch teeth assure a secure pull. Excellent for use with slide hammer. Clamp has raised “bolt stoppers” to hold bolts stationary, for easy, one-handed tightening. Includes pull ring for easy chain hook-up that swivels in the direction from which you want to pull. Use only with ¼” chain.
$132.03$193.45Mo-Clamp 0053 A Clamp with Pull Ring
$132.03$193.45 -
Mo-Clamp 9801 Large Wedge for MO-0400 W Clamp
MO-Clamp 9801 Large Wedge for MO-0400 W Clamp
$98.31$133.75Mo-Clamp 9801 Large Wedge for MO-0400 W Clamp
$98.31$133.75 -
Mo-Clamp 1250 Panel Puller
MO-Clamp 1250 Panel Puller – The Panel Puller is light and easy to use with a slide hammer or pulling post. Use the Panel Puller on fender openings, deck lids, door posts and other openings. Heat-treated alloy steel.
Overall Length: 8″ (203 mm) Width: 3″ (82 mm) Capacity: 3 tons (2,722 kg) Heat Treated Steel. Made in the U.S.A.
$93.59$127.34Mo-Clamp 1250 Panel Puller
$93.59$127.34 -
-
Mo-Clamp 0250 Mini C Clamp
MO-Clamp 0250 Mini C Clamp – Self-tightening. Small, light, versatile. Has a minimum of 1½” (38 mm) throat clearance to reach around flanges, cowls, pinch welds and lips. Butts against panels where only narrow bite is available. 1½” (38 mm) jaws give added grip. Original wedge. Original straight cut tooth design.
$143.53$210.30Mo-Clamp 0250 Mini C Clamp
$143.53$210.30 -
Mo-Clamp 0451 Flash Clamp 3ton Capacity
MO-Clamp 0451 Flash Clamp 3 Ton Capacity. Spring-loaded operation makes each clamp easy to use. Mo-Grip surface and pivoting head allows for a secure grip on almost any surface. Heat-treated investment cast jaws provide years of effective pulling power. Drop-forged wedge. Jaws can be easily replaced.
Capacity: 3 tons (2,722 kg) Length: 8″ (203 mm) Width: 1½” (38 mm) Replacement Parts: #045103 Pivot Jaw, #010704 Wedge, #520038 Pivot Pins, #520031 Retaining Bolt, #840076 Spring Heat Treated Steel. Made in the U.S.A.
$245.32$367.93Mo-Clamp 0451 Flash Clamp 3ton Capacity
$245.32$367.93 -
Mo-Clamp 0655 Dyna-Mo Box Clamp
MO-Clamp 0655 Dyna-Mo Box Clamp – These heat-treated jaws reach around flanges and other obstructions to get a grip on hard-to-reach surfaces. Severe duty tooth design for aggressive pulling power.
Gripping Surface: 1¼” wide (32 mm), ½” deep (10 mm) Overall Length: 8″ (201 mm) Capacity: 3 tons (2,722 kg) Replacement Parts: #9702 Wedge, #5254 Nut, Bolt, Spring & Washer Heat Treated Steel. Made in the U.S.A.
$146.09$214.05Mo-Clamp 0655 Dyna-Mo Box Clamp
$146.09$214.05
