-
Mo-Clamp 3071 Mo-Ty Chain Tie Down Anchor Pull Pot
MO-Clamp 3071 MO-TY Chain Tie Down Anchor Pull Pot – The harder you pull the firmer it wedges. Allows full 360 degrees of pull without chain touching floor. Can be removed and installed in a different location. When correctly installed, top is flush with floor when not in use. Can be easily cleaned by lifting top. A 3-1/2″ (89mm) cored hole is required in concrete floor.
Capacity: 10 tons (9,072 kg) Heat Treated Steel. Made in the U.S.A.
$110.10$149.80Mo-Clamp 3071 Mo-Ty Chain Tie Down Anchor Pull Pot
$110.10$149.80 -
Mo-Clamp 6350 Cable Sling
MO-Clamp 6350 Cable Sling – Wrap around pulls. Can be used as a choker.
Overall Length: 36″ (915mm) Vertical Capacity: 1.5 tons (1,360kg) Choke Capacity: 1 ton (907kg) Basket Capacity: 2.5 tons (2,268kg) Made in the U.S.A.
$58.39$74.15Mo-Clamp 6350 Cable Sling
$58.39$74.15 -
Mo-Clamp 6420 Mini Deep Hook
MO-Clamp 6420 Mini Deep Hook – For fast hook-ups on cowls, door posts and trunk openings, or to reach into cramped places. Includes #210060 Horizontal Bracket and #210070 Vertical Bracket. Brackets are interchangeable with the #6400 Regular Deep Hook Set and #6410 Jumbo Deep Hook Set.
Overall Length: 13″ (330mm) Throat Depth: 6″ (152mm) Throat Opening: 9″ (229mm) Capacity: 4 tons (3,629kg) Replacement Parts: #210060 Horizontal Bracket, #210070 Verticle Bracket, #520050 Pin Heat Treated Steel. Made in the U.S.A.
$295.41$443.06Mo-Clamp 6420 Mini Deep Hook
$295.41$443.06 -
Mo-Clamp 6011 3/8″ X 10′ Chain with Welded Slip Hook
Mo-Clamp 6011 3/8″ X 10′ Chain with Welded Slip Hook
$197.93$290.00Mo-Clamp 6011 3/8″ X 10′ Chain with Welded Slip Hook
$197.93$290.00 -
Mo-Clamp 6302 30″ Nylon Sling with Pear and Triangle
MO-Clamp 6302 30″ Nylon Sling with Pear and Triangle – Protects finish from mars. Wraps around and protects pillars while spreading the force. Forged pull loops for exceptional toughness.
Overall Length: 30″ (790mm) Width: 4″ (102mm) Vertical Capacity: 2,400 lbs (1,088kg) Choke Capacity: 1,500 lbs (680kg) Basket Capacity: 2 tons (1,814kg) Heat Treated Steel. Made in the U.S.A.
$145.66$213.42Mo-Clamp 6302 30″ Nylon Sling with Pear and Triangle
$145.66$213.42 -
Mo-Clamp 0805 Pull Plate Kit for Tac-N-Pull
MO-Clamp 0805 Pull Plate Kit for Tac-N-Pull – For hard-to-hold pulls. Tack weld one of the reusable plates. Attach clamp and pull. Break tack weld with a grinding cut-off wheel or cutting torch.
- Ten (10) 1″ Pull Plates
- Five (5) 1-1/2″ Pull Plates
- Five (5) 3″ Pull Plates.
The Pull Plate Kit includes: Ten (10) #0801 1″ Pull Plates Five (5) #0802 1-1/2″ Pull Plates Five (5) of #0803 3″ Pull Plates. For use with the #0800 Tac-N-Pull Clamp. (Clamp not included in kit.) Heat Treated Steel. Made in the U.S.A.
$151.36$205.93Mo-Clamp 0805 Pull Plate Kit for Tac-N-Pull
$151.36$205.93 -
Mo-Clamp 6210 3/8″ Alloy Clevis Grab Hook
MO-Clamp 6210 3/8″ Alloy Clevis Grab Hook
$34.40$43.68Mo-Clamp 6210 3/8″ Alloy Clevis Grab Hook
$34.40$43.68 -
Mo-Clamp 7051 Baby Tram Gauge with Cardboard Box
MO-Clamp 7051 Baby Tram Gauge with Cardboard Box – Tram Instruments are a versatile and indispensable tool for determining collision damage to uni-body cars and for checking critical measurements during repair. Use the tram to check dimensions between control points on suspension and mechanical components. The Tram Instrument makes it easy to establish dimensions around components and to check contours by comparing measurements from one side of the vehicle to the other. Measures from 2-1/2″ (65mm) to 7′ (2.1m). Level bubble installed in sliding head for accuracy in measurement. Comes in a cardboard box. Made in the U.S.A.
$757.24$1,135.72Mo-Clamp 7051 Baby Tram Gauge with Cardboard Box
$757.24$1,135.72 -
Mo-Clamp 0655 Dyna-Mo Box Clamp
MO-Clamp 0655 Dyna-Mo Box Clamp – These heat-treated jaws reach around flanges and other obstructions to get a grip on hard-to-reach surfaces. Severe duty tooth design for aggressive pulling power.
Gripping Surface: 1¼” wide (32 mm), ½” deep (10 mm) Overall Length: 8″ (201 mm) Capacity: 3 tons (2,722 kg) Replacement Parts: #9702 Wedge, #5254 Nut, Bolt, Spring & Washer Heat Treated Steel. Made in the U.S.A.
$146.09$214.05Mo-Clamp 0655 Dyna-Mo Box Clamp
$146.09$214.05 -
Mo-Clamp 0451 Flash Clamp 3ton Capacity
MO-Clamp 0451 Flash Clamp 3 Ton Capacity. Spring-loaded operation makes each clamp easy to use. Mo-Grip surface and pivoting head allows for a secure grip on almost any surface. Heat-treated investment cast jaws provide years of effective pulling power. Drop-forged wedge. Jaws can be easily replaced.
Capacity: 3 tons (2,722 kg) Length: 8″ (203 mm) Width: 1½” (38 mm) Replacement Parts: #045103 Pivot Jaw, #010704 Wedge, #520038 Pivot Pins, #520031 Retaining Bolt, #840076 Spring Heat Treated Steel. Made in the U.S.A.
$245.32$367.93Mo-Clamp 0451 Flash Clamp 3ton Capacity
$245.32$367.93 -
Mo-Clamp 0250 Mini C Clamp
MO-Clamp 0250 Mini C Clamp – Self-tightening. Small, light, versatile. Has a minimum of 1½” (38 mm) throat clearance to reach around flanges, cowls, pinch welds and lips. Butts against panels where only narrow bite is available. 1½” (38 mm) jaws give added grip. Original wedge. Original straight cut tooth design.
$143.53$210.30Mo-Clamp 0250 Mini C Clamp
$143.53$210.30 -
