-
Mo-Clamp 7051 Baby Tram Gauge with Cardboard Box
MO-Clamp 7051 Baby Tram Gauge with Cardboard Box – Tram Instruments are a versatile and indispensable tool for determining collision damage to uni-body cars and for checking critical measurements during repair. Use the tram to check dimensions between control points on suspension and mechanical components. The Tram Instrument makes it easy to establish dimensions around components and to check contours by comparing measurements from one side of the vehicle to the other. Measures from 2-1/2″ (65mm) to 7′ (2.1m). Level bubble installed in sliding head for accuracy in measurement. Comes in a cardboard box. Made in the U.S.A.
$757.24$1,135.72Mo-Clamp 7051 Baby Tram Gauge with Cardboard Box
$757.24$1,135.72 -
Mo-Clamp 6210 3/8″ Alloy Clevis Grab Hook
MO-Clamp 6210 3/8″ Alloy Clevis Grab Hook
$34.40$43.68Mo-Clamp 6210 3/8″ Alloy Clevis Grab Hook
$34.40$43.68 -
Mo-Clamp 4050 Multi-Angle Clamp
MO-Clamp 4050 Multi-Angle Clamp – The versatile Multi-Angle Clamp permits pulling from any direction within a 180-degree arc. The multi-angle side pull plate makes two-way pulling faster and easier. Hardened gator teeth firmly grip narrow seams and pinch welds. Clamp has “bolt stoppers” to hold bolts stationary, for easy tightening.
Gripping Surface: 3-1/2″ wide (95 mm), 1/2 ” deep (19 mm) Overall Length: 7″ (178 mm) Capacity: 4 tons (3,629 kg) Replacement Parts: #5325 Nut, Bolt & Washer, #200131 Side Pull Bracket Heat Treated Steel. Made in the U.S.A.
$243.64$365.42Mo-Clamp 4050 Multi-Angle Clamp
$243.64$365.42 -
Mo-Clamp 4035 Angle Bracket
MO-Clamp 4035 Angle Bracket – Bolt to surface for a 90-degree straight pull or use with #4030 3-Way Pull Clamp, pair of #4025 Frame Rack Jaws or #4010 Frame Rack Unibody Clamp..
Overall Length: 6″ (152 mm) Capacity: 6 tons (5,443 kg) Heat Treated Steel. Made in the U.S.A.
$91.73$124.80Mo-Clamp 4035 Angle Bracket
$91.73$124.80 -
Mo-Clamp 3120 Small Round Nose Sheet Metal Hook, Swivel
MO-Clamp 3120 Small Round Nose Sheet Metal Hook, Swivel – Single individual small round nose hook.
$81.41$110.76Mo-Clamp 3120 Small Round Nose Sheet Metal Hook, Swivel
$81.41$110.76 -
Mo-Clamp 1900 Quick Hook
MO-Clamp 1900 Quick Hook – Four hole-size selection for quick hook-ups in existing frame holes for pulling of damaged frames. Uses Mo-Clamp’s easy chain hook-up system. Hole sizes: 1-7/8″ (48 mm), 1-5/8″ (41 mm), 1″ (25 mm), 7/8″ (22 mm).
Overall Length: 6-1/2″ (165 mm) Capacity: 4 tons (3,629 kg) Heat Treated Steel. Made in the U.S.A.
$115.58$157.25Mo-Clamp 1900 Quick Hook
$115.58$157.25 -
Mo-Clamp 210070 Replacement Vertical Bracket
MO-Clamp 210070 Replacement Vertical Bracket
$85.31$116.07Mo-Clamp 210070 Replacement Vertical Bracket
$85.31$116.07 -
Mo-Clamp 1650 Double Eye Chain Hook
MO-Clamp 1650 Double Eye Chain Hook – A handy chain hook-up pulling plate for making double pulls. The special design allows for both wide or narrow pulls. Double pulls, using multiple self-tightening clamps, can be made from the same pulling tower or pulling post. Features Mo-Clamp easy chain hook-up system. Designed for use with 3/8″ chain.
Overall Length: 6-1/2″ (165 mm) Capacity: 5 tons (4,536 kg) Heat Treated Steel. Made in the U.S.A.
$146.77$199.69Mo-Clamp 1650 Double Eye Chain Hook
$146.77$199.69 -
Mo-Clamp 4154 Hole Plug and Single Claw
MO-Clamp 4154 Hole Plug and Single Claw – Versatile combination for quick hook-ups and multiple pulls. 18-inches of 3/8″ chain included.
Overall Length: 26″ (672 mm) Working Load Limit: 6,600 lbs Working Load Limit: Refers to the maximum load (rated capability) in pounds that shall be applied in direct tension to a straight length of chain or attachment. NEVER EXCEED THE WORKING LOAD LIMIT of chains or attachments, even when the item is new and the load limit is uniformly applied. Replacement Parts: #5220 Clevis Pin & Rue Clip Heat Treated Steel. Made in the U.S.A.
$149.71$219.35Mo-Clamp 4154 Hole Plug and Single Claw
$149.71$219.35 -
Mo-Clamp 5011 #1 Board and Hooks
MO-Clamp 5011 #1 Board and Hooks – Tool board only with hooks.
$114.35$167.55Mo-Clamp 5011 #1 Board and Hooks
$114.35$167.55 -
Mo-Clamp 0200 C Clamp
MO-Clamp 0200 C Clamp – Self-Tightening. Its 11/2″ (39 mm) throat clearance fits over a flange or frame horn, or around a lip to pull from behind. Original wedge. Original straight cut tooth design.
$177.56$260.16Mo-Clamp 0200 C Clamp
$177.56$260.16 -
Mo-Clamp 5811 Snap Block
MO-Clamp 5811 Snap Block – Double your pulling power. Use this adapter with #5810 Down Pulley Assembly to make a Snap Block Pulley.
Overall Length: 8-1/2″ (210mm) Capacity: 5 tons (4,536kg) Replacement Parts: #6210 Hook Only, #520503 Bolt Assembly Heat Treated Steel. Made in the U.S.A.
$94.37$128.40Mo-Clamp 5811 Snap Block
$94.37$128.40
