-
Mo-Clamp 6325 Hook Cluster
MO-Clamp 6325 Ever get really frustrated when you need a special sized hook and can’t find it? Here’s the newest in that family of holding devices. The Hook Cluster with chain will most likely do the job when the others quit. The very most common tie downs all at your finger tips. Can’t get any better than this. The J, R, T and 3/8 hook.
$169.20$230.21Mo-Clamp 6325 Hook Cluster
$169.20$230.21 -
Mo-Clamp 4215 Reverse Pull Clamp
Mo-Clamp 4215 Reverse Pull Clamp – This tool is a must have for frame jobs. Wrecks cause sway on frame rails, and the resulting bend needs help straightening. This clamp puts pressure at the weak spot and the bend, and with this tool’s 30% bend it allows for easier hook up. To get the best angle for the pull, the head can swivel a bit because of the design of the holes. Heavy-duty, solid, no slippage, long past due! Brought to us from a 30-year technician.
A bend of 30 degrees makes all the difference when hooking up this tough guy onto a frame rail and making corrections.
Combined with swivel holes under the jaws the right angle for the job at hand is assured.
Fortified with our Forever Warranty for toughness this tool is the right one for the job at hand.
Replacement Parts: #421501 Plate, #5200 Nut, Bolt & Washer, 840076 SpringHeat Treated Steel. Made in the USA.
Length: 10.5″ (267mm)
$174.61$255.84Mo-Clamp 4215 Reverse Pull Clamp
$174.61$255.84 -
Mo-Clamp 1360 Junior Versa Hook
MO-Clamp 1360 Junior Versa Hook – The Junior Versa Hook is designed smaller to allow body men to get into tighter areas. The Junior Versa Hook end is only 1-3/4″ wide for pulling on rocker panels, door posts, etc. The back lip is used for a tie-down to secure the vehicle during pulls. The narrow width permits use on frame racks with smaller slots. Designed for use with 3/8″ chain.
Gripping Surface: 1-3/4″ wide (45 mm), 1″ deep (25 mm) Overall Length: 9″ (229 mm) Width: 1-3/4″ (45 mm) Capacity: 5 tons (4,536 kg) Heat Treated Steel. Made in the U.S.A.
$175.83$257.62Mo-Clamp 1360 Junior Versa Hook
$175.83$257.62 -
Mo-Clamp 0800 Tac-N-Pull with Pull Plates
MO-Clamp 0800 Tac-N-Pull with Pull Plates – For hard-to-hold pulls. Tack weld one of the reusable plates. Attach clamp and pull. Break tack weld with a grinding cut-off wheel or cutting torch. Includes two 3″ plates, two 1 1/4″ plates, and two 1″ plates.
Gripping Surface: Up to 3″ wide (76 mm) Overall Length: 5-1/2″ (140 mm) Capacity: 3 tons (2,722 kg)
Replacement Parts: #0801 1″ Pull Plate, #0802 1-1/2″ Pull Plate, #0803 3″ Pull Plate or #0805 Tac-N-Pull Plate Kit (includes ten 1″ plates, five 1-1/2″ plates, and five 3″ plates) Heat Treated Steel. Made in the U.S.A.
$175.88$204.02Mo-Clamp 0800 Tac-N-Pull with Pull Plates
$175.88$204.02 -
Mo-Clamp 6012 3/8″ X 12′ Chain with Grab Hook
Mo-Clamp 6012 3/8″ X 12′ Chain with Grab Hook
* Working Load Limit: 6,600 lbs (2,994kg)
* Proof Test: 20,000 lbs (9,070kg)
* Manufactured in accordance with the NACM Specification for chain,
* ASTM Standard A391 and ASTM Standard A413 for grade 70 carbon steel chain.
* Mo-Clamp chain is protectively plated with yellow dichromate$176.37$258.42Mo-Clamp 6012 3/8″ X 12′ Chain with Grab Hook
$176.37$258.42 -
Mo-Clamp 0200 C Clamp
MO-Clamp 0200 C Clamp – Self-Tightening. Its 11/2″ (39 mm) throat clearance fits over a flange or frame horn, or around a lip to pull from behind. Original wedge. Original straight cut tooth design.
$177.56$260.16Mo-Clamp 0200 C Clamp
$177.56$260.16 -
Mo-Clamp 4150 Double Looper Claw Hooks
MO-Clamp 4150 Double Looper Claw Hooks – Two #4110 Single Claw Hooks with #4052 Triangle. Grabs bumpers or panels. Easy 3/8″ chain connection. Triangle allows for center pull.
Overall Length: 10″ (254 mm) Capacity: 5 tons (4,536 kg) Replacement Parts: #5220 Clevis Pin & Rue Clip Heat Treated Steel. Made in the U.S.A.
$178.88$262.09Mo-Clamp 4150 Double Looper Claw Hooks
$178.88$262.09 -
Mo-Clamp 4060 Mity Bite Clamp
MO-Clamp 4060 Mity Bite Clamp – Makes possible one- or two-directional pulling and can be used in a confined area. Gator teeth grip metal firmly.
Gripping Surface: 2″ wide (51 mm) Overall Length: 8-1/2″ (21 mm) Capacity: 3 tons (2,722 kg) Replacement Parts: #5225 Nut, Bolt & Washer Heat Treated Steel. Made in the U.S.A.
$178.92$262.15Mo-Clamp 4060 Mity Bite Clamp
$178.92$262.15 -
Mo-Clamp 6319 Jumbo Sling
MO-Clamp 6319 Jumbo Sling – Biggest one we make. Designed for lower/ upper suspensions, door pillars and about anywhere you need a pull that conforms to odd shaped vehicle parts.
Overall Length: 60″ (762mm) Width: 3 ” (78mm) Made in the U.S.A.
$179.85$263.51Mo-Clamp 6319 Jumbo Sling
$179.85$263.51 -
Mo-Clamp 0660 Long Nose Clamp
MO-Clamp 0660 Long Nose Clamp – Similar to the popular #0300 Jr® Clamp, the Long Nose is self-tightening and includes the original wedge. Cross-hatch tooth design, spring loaded for easy opening, deeper reach for hard-to- get-to areas.
Gripping Surface: 1¾” wide (45 mm), 1″ deep (25 mm) Overall Length: 9½” (241 mm) Capacity: 5 tons (4,536 kg) Replacement Parts: #9701 Wedge, #5251 Nut, Bolt, Spring & Washer Heat Treated Steel. Made in the U.S.A.
$182.57$267.50Mo-Clamp 0660 Long Nose Clamp
$182.57$267.50 -
Mo-Clamp 6013 3/8″ X 12′ Chain with Alloy Slip Hook
Mo-Clamp 10 Ton Tower Chain
With Removable Slip Hook$182.73$267.74Mo-Clamp 6013 3/8″ X 12′ Chain with Alloy Slip Hook
$182.73$267.74 -
Mo-Clamp 2460 Radiator Core Support Puller
MO-Clamp 2460 Radiator Core Support Puller – A simple to operate two piece tool designed expressly for radiator core support brackets and body/cab mount brackets on full frame vehicles. The tool addresses several sizes with both a large and small bracket adapter allowing the technician to “sandwich” the brackets so those tough pulls and twists can be made.
Length: 7″ Width: 3.5″ Capacity: 3 tons Replacement Parts: 510080 bolt, 510061 washer, 510010 nut
$189.69$277.93Mo-Clamp 2460 Radiator Core Support Puller
$189.69$277.93
