-
Mo-Clamp 3081 T-top II
MO-Clamp 3081 T-Top II – Installs using only the installation tool (#3082) and a torque wrench. Provides a full 10 tons of pulling capacity using 3/8″ Chain. Lies flush with floor when not in use. 3-1/2″ (89mm) cored hole is required.
Capacity: 10 tons (9,072 kg) Replacement Parts: #308110 Casting Cap, #3082 Installation Tool Heat Treated Steel. Made in the U.S.A.
$165.15$224.70Mo-Clamp 3081 T-top II
$165.15$224.70 -
Mo-Clamp 0452 Flash Clamp 7ton
MO-Clamp 0452 Flash Clamp 7 Ton – Spring-loaded operation makes each clamp easy to use. Mo-Grip surface and pivoting head allows for a secure grip on most surfaces. Heat-treated investment cast jaws provide years of effective pulling power. Drop-forged wedge. Jaws can be easily replaced.
Capacity: 7 tons (6,350 kg) Length: 8″ (203 mm) Width: 3½” (89 mm) Replacement Parts: #045203 Pivot Jaw, #010706 Wedge, #520029 Pivot Pins, #520033 Retaining Bolt, #840076 Spring Heat Treated Steel. Made in the U.S.A.
$335.80$503.64Mo-Clamp 0452 Flash Clamp 7ton
$335.80$503.64 -
Mo-Clamp 7001 Universal Tram Gauge with Cardboard Box
MO-Clamp 7001 Universal Tram Gauge with Cardboard Box – Tram Instruments are a versatile and indispensable tool for determining collision damage to uni-body cars and for checking critical measurements during repair. Use the tram to check dimensions between control points on suspension and mechanical components. The Tram Instrument makes it easy to establish dimensions around components and to check contours by comparing measurements from one side of the vehicle to the other. Measures from 2-1/2″ (65mm) to 11′ (3.3m). Level bubble installed in sliding head for accuracy in measurement. Made in the U.S.A.
$1,144.19$1,716.07Mo-Clamp 7001 Universal Tram Gauge with Cardboard Box
$1,144.19$1,716.07 -
Mo-Clamp 6307 60″ Sling with Snap Rings
MO-Clamp 6307 60″ Sling with Snap Rings – Use as a safeguard against separation, breakage of temporary welds or clamp failure. Not meant for pulling. Use for restraint of chain and clamps only.
Overall Length: 60″ (1,524mm) Width: 1″ (25mm) Heat Treated Steel. Made in the U.S.A.
$96.67$131.52Mo-Clamp 6307 60″ Sling with Snap Rings
$96.67$131.52 -
Mo-Clamp 4151 Grab Hook and Single Claw
MO-Clamp 4151 Grab Hook and Single Claw – Versatile combination for quick hook-ups and multiple pulls. 18-inches of 3/8″ chain included.
Overall Length: 24″ (610 mm) Working Load Limit: 6,600 lbs Working Load Limit: Refers to the maximum load (rated capability) in pounds that shall be applied in direct tension to a straight length of chain or attachment. NEVER EXCEED THE WORKING LOAD LIMIT of chains or attachments, even when the item is new and the load limit is uniformly applied.
$108.18$158.50Mo-Clamp 4151 Grab Hook and Single Claw
$108.18$158.50 -
Mo-Clamp 4044 1/2″ Screw Pin Shackle
MO-Clamp 4044 1/2″ Screw Pin Shackle
$32.44$41.19Mo-Clamp 4044 1/2″ Screw Pin Shackle
$32.44$41.19 -
Mo-Clamp 3100 Sheet Metal Hooks – Set
MO-Clamp 3100 Sheet Metal Hooks – Set – Alloy heat-treated hooks increase pulling options. May be used with Hole Pull Plates (#0810 & 0820) to pull, or use in combination with clamps. Includes one of each: #3110, #3120, #3130, #3140.
Capacity: 2 tons (1,814 kg) Replacement Parts: #4051 Eye Nut, #3110 Small Flat Nose Hook, #3120 Small Round Nose Hook, #3130 Large Flat Nose Hook, #3140 Large Round Nose Hook Heat Treated Steel. Made in the U.S.A.
$291.25$436.82Mo-Clamp 3100 Sheet Metal Hooks – Set
$291.25$436.82 -
Mo-Clamp 5711 Mo-Wedge
MO-Clamp 5711 MO-Wedge – High impact polycarbonate plastic. Great for spreading damaged body panels. Used with Mo-Block Dolly for straightening out the rail pocket.
Overall Length: 5-1/2″ (140mm) Heat Treated Steel. Made in the U.S.A.
$8.76$11.13Mo-Clamp 5711 Mo-Wedge
$8.76$11.13 -
Mo-Clamp 6317 “J” Hook with 5/16″ Anodized Chain
MO-Clamp 6317 “J” Hook with Chain – Original shipping tie down for ALL vehicles. Excellent around the frame machine to help hold a frame while diamond is being pulled.
Overall Length 6″ (228mm) Capacity 4 tons (3,629kg)
$61.25$77.78Mo-Clamp 6317 “J” Hook with 5/16″ Anodized Chain
$61.25$77.78 -
Mo-Clamp 5220 Clevis Pin and Rue
MO-Clamp 5220 Clevis Pin & Rue
$12.19$15.48Mo-Clamp 5220 Clevis Pin and Rue
$12.19$15.48 -
Mo-Clamp 4021 Frame Rack Dyna-Mo #1
MO-Clamp 4021 Frame Rack Dyna-Mo #1 – One pair Frame Rack Dyna-mo jaws with 7″ draw bar, one side pull bracket, shackle and oval loop. Raised “ears” to hold bolt in place while tightening. Machine tooth design.
Gripping Surface: 3-1/2″ wide (95 mm) Overall Length: 7″ (178 mm) Capacity: 5 tons (4,536 kg) Replacement Parts: #4043 Oval Loop, #4055 7/16″ Shackle, #5200 Nut, Bolt & Washer, #200203 Side Pull Bracket Heat Treated Steel. Made in the U.S.A.
$300.22$450.27Mo-Clamp 4021 Frame Rack Dyna-Mo #1
$300.22$450.27 -
Mo-Clamp 3051 T-top Anchor Pot (1 Only)
MO-Clamp 3051 T-Top Anchor Pot – An anchoring system for versatile pulling. Insert 3/8″ frame straightening chain, anchor with lock cap, and pull from any direction or angle. Lock cap keeps out dirt and dust when not in use. Includes sleeve and lock cap. 3-1/2″ (89mm) cored hole required. 3060 Cast-in Model is available for new floors.
Capacity: 10 tons (9,072 kg) Replacement Parts: #300210 Welded Cap Heat Treated Steel. Made in the U.S.A.
$148.28$201.74Mo-Clamp 3051 T-top Anchor Pot (1 Only)
$148.28$201.74
