-
Mo-Clamp 5711 Mo-Wedge
MO-Clamp 5711 MO-Wedge – High impact polycarbonate plastic. Great for spreading damaged body panels. Used with Mo-Block Dolly for straightening out the rail pocket.
Overall Length: 5-1/2″ (140mm) Heat Treated Steel. Made in the U.S.A.
$8.76$11.13Mo-Clamp 5711 Mo-Wedge
$8.76$11.13 -
Mo-Clamp 3100 Sheet Metal Hooks – Set
MO-Clamp 3100 Sheet Metal Hooks – Set – Alloy heat-treated hooks increase pulling options. May be used with Hole Pull Plates (#0810 & 0820) to pull, or use in combination with clamps. Includes one of each: #3110, #3120, #3130, #3140.
Capacity: 2 tons (1,814 kg) Replacement Parts: #4051 Eye Nut, #3110 Small Flat Nose Hook, #3120 Small Round Nose Hook, #3130 Large Flat Nose Hook, #3140 Large Round Nose Hook Heat Treated Steel. Made in the U.S.A.
$291.25$436.82Mo-Clamp 3100 Sheet Metal Hooks – Set
$291.25$436.82 -
Mo-Clamp 6304 60″ Reinforced Nylon Sling
MO-Clamp 6304 60″ Reinforced Nylon Sling – Protects finish from mars. With inside Mo-Guard protective covering for extra long life.
Overall Length: 60″ (1,525mm) Width: 3″ (76mm) Vertical Capacity: 2.5 tons (2,267kg) Choke Capacity: 2 tons (1,814kg) Basket Capacity: 5 tons (4,536 kg) Made in the U.S.A.
$132.43$194.04Mo-Clamp 6304 60″ Reinforced Nylon Sling
$132.43$194.04 -
Mo-Clamp 2460 Radiator Core Support Puller
MO-Clamp 2460 Radiator Core Support Puller – A simple to operate two piece tool designed expressly for radiator core support brackets and body/cab mount brackets on full frame vehicles. The tool addresses several sizes with both a large and small bracket adapter allowing the technician to “sandwich” the brackets so those tough pulls and twists can be made.
Length: 7″ Width: 3.5″ Capacity: 3 tons Replacement Parts: 510080 bolt, 510061 washer, 510010 nut
$189.69$277.93Mo-Clamp 2460 Radiator Core Support Puller
$189.69$277.93 -
Mo-Clamp 1100 Handy Link
MO-Clamp 1100 Handy Link – Chain too long? Make it shorter! Chain to short? Make it longer! Alloy heat-treated steel. Pulling slots can be used with #0900 Hole Pull Adapters. Designed for use with 3/8″ chain.
Overall Length: 6-1/2″ (165 mm) Capacity: 5 tons (4,536 kg) Heat Treated Steel. Made in the U.S.A.
$104.67$132.92Mo-Clamp 1100 Handy Link
$104.67$132.92 -
Mo-Clamp 4060 Mity Bite Clamp
MO-Clamp 4060 Mity Bite Clamp – Makes possible one- or two-directional pulling and can be used in a confined area. Gator teeth grip metal firmly.
Gripping Surface: 2″ wide (51 mm) Overall Length: 8-1/2″ (21 mm) Capacity: 3 tons (2,722 kg) Replacement Parts: #5225 Nut, Bolt & Washer Heat Treated Steel. Made in the U.S.A.
$178.92$262.15Mo-Clamp 4060 Mity Bite Clamp
$178.92$262.15 -
Mo-Clamp 1200 Twin Pull
MO-Clamp 1200 Twin Pull – Do you have need for a light pull but a larger gripping area? The Twin Pull enables you to use two clamps side by side for more pull. Also, can be used with two #1300 Sill Hooks. Designed for use with 3/8″ chain.
Overall Length: 5″ (127 mm) Width: 3″ (76 mm) Between Pulls Capacity: 6 tons (5,443 kg) Heat Treated Steel. Made in the U.S.A.
$96.32$131.05Mo-Clamp 1200 Twin Pull
$96.32$131.05 -
Mo-Clamp 0450 Flash Clamp 5ton
MO-Clamp 0450 Flash Clamp 5 Ton – New Mo-Grip surfaced jaws provide superior traction when coupled with pivoting head for uneven surfaces. Spring-loaded operation means no impacting to tighten. Heat-treated investment cast jaws provide years of effective pulling power. Drop-forged wedge. Jaws can be easily replaced.
Capacity: 5 tons (4,536 kg) Length: 8″ (203 mm) Width: 2″ (50.7 mm) Weight: 3 lbs (1.36 kg) Replacement Parts: #010453 Pivot Jaw, #010702 Small Round Wedge, #520039 Pivot Pins, #520033 Retaining Bolt, #840076 Spring Heat Treated Steel. Made in the U.S.A.
$289.23$433.79Mo-Clamp 0450 Flash Clamp 5ton
$289.23$433.79 -
Mo-Clamp 4065 All Angle Clamp
MO-Clamp 4065 All Angle Clamp – One of the toughest little clamps we have ever built. Both straight pull or right angle with an infinite twist capability. Mo-Grip surface has been applied to the jaw surfaces for a better bite on the new carbon and UHSS steels.
Jaw Width 1-7/8″ Throat Depth 1″
$200.83$294.25Mo-Clamp 4065 All Angle Clamp
$200.83$294.25 -
Mo-Clamp 1340 Bolt Puller
MO-Clamp 1340 Bolt Puller – Made for those difficult to get at suspension and frame bolts that need the area they screw into realigned or straightened. Use this for up to a 2.5 ton pull and be certain you are dead center over the bolt area. Uses the oem bolt to pull against the threads with. Just loosen the bolt enough to get the tool cradle under the head and re-tighten a few turns to assure no thread loss and pull away.
Overall length: 6″ (152mm) Capacity 2.5 tons (2.268kg) Made in USA
$79.48$108.14Mo-Clamp 1340 Bolt Puller
$79.48$108.14 -
Mo-Clamp 4110 Single Claw Hook
MO-Clamp 4110 Single Claw Hook – Drop Forged! Use as an accessory with draw bars or chain. Use a pair with Triangle or Oval Loop as a chain sorter, double hook, or bumper hook. Designed for use with 3/8″ chain.
Overall Length: 5″ (127 mm) Capacity: 6 tons (5,443 kg) Replacement Parts: #5220 Clevis Pin & Rue Clip Heat Treated Steel. Made in the U.S.A.
$68.80$87.36Mo-Clamp 4110 Single Claw Hook
$68.80$87.36 -
Mo-Clamp 4043 Oval Loop
MO-Clamp 4043 Oval Loop – Working Load Limit: 3,600 lbs.
$38.23$48.55Mo-Clamp 4043 Oval Loop
$38.23$48.55
