-
Mo-Clamp 0300 Jr Clamp
MO-Clamp 0300 Jr Clamp – One of Mo-Clamp’s original self-tightening clamps. A must for every body man. 1½” wide bite for aggressive pulling. Original wedge. New angled tooth design.
$192.59$282.18Mo-Clamp 0300 Jr Clamp
$192.59$282.18 -
Mo-Clamp 0650 Box Clamp
MO-Clamp 0650 Box Clamp – A must for pulling on box rails with welded-on bumper flanges. Reaches around protruding metal to get a grip on hard-to-reach surfaces. Its heat-treated jaws grip a substantial area for pulls from several directions and angles. Gator tooth design.
Gripping Surface: 2″ wide (50 mm), 2″ deep (50 mm) Overall Length: 10″ (254 mm) Capacity: 4 tons (3,629 kg) Replacement Parts: #5330 Nut, Bolt & Washer Heat Treated Steel. Made in the U.S.A.
$193.96$284.19Mo-Clamp 0650 Box Clamp
$193.96$284.19 -
Mo-Clamp 6011 3/8″ X 10′ Chain with Welded Slip Hook
Mo-Clamp 6011 3/8″ X 10′ Chain with Welded Slip Hook
$197.93$290.00Mo-Clamp 6011 3/8″ X 10′ Chain with Welded Slip Hook
$197.93$290.00 -
Mo-Clamp 4065 All Angle Clamp
MO-Clamp 4065 All Angle Clamp – One of the toughest little clamps we have ever built. Both straight pull or right angle with an infinite twist capability. Mo-Grip surface has been applied to the jaw surfaces for a better bite on the new carbon and UHSS steels.
Jaw Width 1-7/8″ Throat Depth 1″
$200.83$294.25Mo-Clamp 4065 All Angle Clamp
$200.83$294.25 -
Mo-Clamp 0550 Tight Opening Clamp
MO-Clamp 0550 Tight Opening Clamp – Mo-Clamp’s new design Tight Opening Clamp has all the same gripping dimension requirements as the old design. Redesigned and strengthened with our totally new screw drive mechanism. Still a full 3 ton capacity. Still able to reach core support and upper sheet metal areas where no other can. Perfect for small pick-up frame rails.
Gripping Surface: 1½” wide (38 mm), ½” deep (13 mm) Overall Length: 6½” (165 mm) Capacity: 3 tons (2,722 kg) Heat Treated Steel. Made in the U.S.A.
$204.43$299.53Mo-Clamp 0550 Tight Opening Clamp
$204.43$299.53 -
Mo-Clamp 4025 Frame Rack Jaws
MO-Clamp 4025 Frame Rack Jaws – Clamp has recessed pockets to hold bolts stationary for easy tightening.
Gripping Surface: 4″ wide (102 mm), 1/2 ” deep (19 mm) Overall Length: 5″ (127 mm) Capacity: 6 tons (5,443 kg) Replacement Parts: #4045 Nut, Bolt & Washer, #4046 Spring Heat Treated Steel. Made in the U.S.A.
$216.05$316.55Mo-Clamp 4025 Frame Rack Jaws
$216.05$316.55 -
Mo-Clamp 1350 Versa Hook
MO-Clamp 1350 Versa Hook – The Versa Hook is a versatile tool used as an outer track tie-down to secure vehicles during pulls. It is used as a pulling device for rocker panels, door posts, windshield posts, etc. Original straight-cut tooth design. Versa Hook end is 2-1/2″ wide.
Gripping Surface: 2-1/2″ wide (63 mm), 1″ deep (25 mm) Overall Length: 8″ (203 mm) Width: 2-1/2″ (63 mm) at end Capacity: 5 tons (4,536 kg) Heat Treated Steel. Made in the U.S.A.
$216.35$324.49Mo-Clamp 1350 Versa Hook
$216.35$324.49 -
Mo-Clamp 0670 Baby Box Clamp
MO-Clamp 0670 Baby Box Clamp – Self-tightening. Great for single-lip flanges and inside frame horns. Original wedge; cross- hatch tooth design; spring-loaded for easy opening. Throat clearance of 1½” high (38 mm), 1¼” deep (32 mm).
Gripping Surface: 1¾” wide (45 mm), 1″ deep (25 mm) Overall Length: 9½” (241 mm) Capacity: 5 tons (4,536 kg) Replacement Parts: #9701 Wedge, #5252 Nut, Bolt, Spring & Washer Heat Treated Steel. Made in the U.S.A.
$222.73$326.35Mo-Clamp 0670 Baby Box Clamp
$222.73$326.35 -
Mo-Clamp 0750 Lip Grip with Side Pull Bracket
MO-Clamp 0750 Lip Grip with Side Pull Bracket – Multi-purpose clamp with gator teeth for sure, non-slip pulls on any lip. Use the Lip Grip as a sandwich clamp on quarter panels or floor sections. The chain loop permits pulling at any angle. Side pull bracket adds a 90-degree angle for two- directional pulling.
Gripping Surface: 2″ wide (50 mm), 5″ deep (127 mm) Overall Length: 6-1/2″ (165 mm) Capacity: 4 tons (3,629 kg) Replacement Parts: #5225 Nut & Bolt Heat Treated Steel. Made in the U.S.A.
$228.30$342.40Mo-Clamp 0750 Lip Grip with Side Pull Bracket
$228.30$342.40 -
Mo-Clamp 4030 3-Way Pull Clamp
MO-Clamp 4030 3-Way Pull Clamp – Clamp has recessed pockets to hold bolts stationary for easy tightening. Includes #4043 Oval Loop.
Gripping Surface: 4″ wide (102 mm), 1/2 ” deep (19 mm) Overall Length: 8″ (203 mm) Capacity: 6 tons (5,443 kg) Replacement Parts: #4045 Nut, Bolt & Washer, #4046 Spring Heat Treated Steel. Made in the U.S.A.
$237.35$347.76Mo-Clamp 4030 3-Way Pull Clamp
$237.35$347.76 -
Mo-Clamp 5818 3″ Down Pulley
MO-Clamp 5818 3″ Down Pulley – A new smaller down pulley from Mo-Clamp provides the same benefits of our 5 down pulley in a smaller version. Made of Mo-Clamp Tru-Tuff steel alloy and covered by our forever warranty, this tool will give you years of trouble-free service. The existing Mo-Clamp Block Pulley Adapter (part number 5811) is interchangeable between the two down pulley tools, giving the technician great flexibility to use the tool which meets their needs and space requirements.
$240.99$353.10Mo-Clamp 5818 3″ Down Pulley
$240.99$353.10 -
Mo-Clamp 4050 Multi-Angle Clamp
MO-Clamp 4050 Multi-Angle Clamp – The versatile Multi-Angle Clamp permits pulling from any direction within a 180-degree arc. The multi-angle side pull plate makes two-way pulling faster and easier. Hardened gator teeth firmly grip narrow seams and pinch welds. Clamp has “bolt stoppers” to hold bolts stationary, for easy tightening.
Gripping Surface: 3-1/2″ wide (95 mm), 1/2 ” deep (19 mm) Overall Length: 7″ (178 mm) Capacity: 4 tons (3,629 kg) Replacement Parts: #5325 Nut, Bolt & Washer, #200131 Side Pull Bracket Heat Treated Steel. Made in the U.S.A.
$243.64$365.42Mo-Clamp 4050 Multi-Angle Clamp
$243.64$365.42
