-
Mo-Clamp 1360 Junior Versa Hook
MO-Clamp 1360 Junior Versa Hook – The Junior Versa Hook is designed smaller to allow body men to get into tighter areas. The Junior Versa Hook end is only 1-3/4″ wide for pulling on rocker panels, door posts, etc. The back lip is used for a tie-down to secure the vehicle during pulls. The narrow width permits use on frame racks with smaller slots. Designed for use with 3/8″ chain.
Gripping Surface: 1-3/4″ wide (45 mm), 1″ deep (25 mm) Overall Length: 9″ (229 mm) Width: 1-3/4″ (45 mm) Capacity: 5 tons (4,536 kg) Heat Treated Steel. Made in the U.S.A.
$175.83$257.62Mo-Clamp 1360 Junior Versa Hook
$175.83$257.62 -
Mo-Clamp 0802 Pull Plate for Tac-N-Pull 1-1/2″
MO-Clamp 0802 Pull Plate for Tac-N-Pull 1-1/2″
$8.84$11.23Mo-Clamp 0802 Pull Plate for Tac-N-Pull 1-1/2″
$8.84$11.23 -
Mo-Clamp 4016 Frame Rack Angle Bracket Only
MO-Clamp 4016 Frame Rack Angle Bracket Only – Will hold down cars with horizontal pinch welds including Honda 1990 and up. Angles can be drilled to fit frame racks, benches, etc. Includes two #4044 1/2 ” Shackles.
Does Not Include Jaws.
$486.80$730.11Mo-Clamp 4016 Frame Rack Angle Bracket Only
$486.80$730.11 -
Mo-Clamp 0680 Big Mouth Clamp
MO-Clamp 0680 Big Mouth Clamp – Self-tightening. A perfect solution for hard-to-get-to areas. Great where large opening is needed. Original wedge; cross-hatch tooth design; spring-loaded for easy opening. Throat clearance of 2¼” high (57 mm), 1¼” deep (32 mm).
Gripping Surface: 1¾” wide (45 mm), 1″ deep (25 mm) Overall Length: 9½” (241 mm) Capacity: 5 tons (4,536 kg) Replacement Parts: #9701 Wedge, #5253 Nut, Bolt, Spring & Washer Heat Treated Steel. Made in the U.S.A.
$255.60$374.50Mo-Clamp 0680 Big Mouth Clamp
$255.60$374.50 -
Mo-Clamp 5400 Nuts and Bolts Jobber Pack
MO-Clamp 5400 Nuts and Bolts Jobber Pack – Most commonly used bolts, nuts, washers, and clevis pins. A diagram on the box helps you immediately locate the part you need. Mo-clamp bolts have special grades of material and are heat-treated to our specifications. Contains Grade 5 and Grade 8 bolts specific to individual Mo-Clamp tools.
$411.90$617.78Mo-Clamp 5400 Nuts and Bolts Jobber Pack
$411.90$617.78 -
Mo-Clamp 0808 Maxi Tac-N-Pull
MO-Clamp 0808 Maxi Tac-N-Pull – A new tool that is the step up from our old standard, the #0800. This is the big brother for those pulls on creases and bends that demand a heavier pull. Or perhaps a pull that requires some twist to follow the sheet metal out the way it went in. This Tac-N-Pull has all of the finesse given to you by the first tool, #0805, PLUS, you have two more pulling points to add twist to your pull for that final tweak. Use with #1150 Chain Spreader Bar for multiple pulls in a heavily damaged area. These tools will help get more use out of your frame machine. Giving the technician options is what makes Mo-Clamp the best.
Design allows for uneven pulls and getting around obstructions Made of Mo-Clamp Tru-Tuff Steel Alloy Covered by the Mo-Clamp forever warranty Can use all 5 sizes of different pull plates in whatever combination necessary Comes with 2 – 4″ pull plates (0804) and 2 – 6″ pull plates (0806) Height: 9″ Capacity: 3 Tons
$374.55$561.75Mo-Clamp 0808 Maxi Tac-N-Pull
$374.55$561.75 -
Mo-Clamp 4146 Grab Hook/Slip Hook Combo
MO-Clamp 4146 Grab Hook/Slip Hook Combo – Grab hook on one end; slip hook on the other. For hooking into clamps or pull rings. Fast hook-up to any section of 3/8″ chain.
Overall Length: 9-1/2″ (241 mm) Capacity: 7 tons (6,350 kg) Heat Treated Steel. Made in the U.S.A.
$100.21$136.34Mo-Clamp 4146 Grab Hook/Slip Hook Combo
$100.21$136.34 -
Mo-Clamp 6600 Chain Snugger
MO-Clamp 6600 Chain Snugger – Tightens chain when used with a #1700 Chain Locking Fork on frame racks and other applications.
Overall Length: 12″ (305mm) Capacity: 6 tons (5,443kg) Heat Treated Steel. Made in the U.S.A.
$149.06$218.41Mo-Clamp 6600 Chain Snugger
$149.06$218.41 -
Mo-Clamp 6400 Regular Deep Hook Set
MO-CLAMP 6400 REGULAR DEEP HOOK SET – For fast hook-ups on cowls, door posts and trunk openings, or to reach into cramped places. #210030 Small Bracket (2″ x 3″) and #210020 Large Bracket (2″ x 9″) included.
Overall Length: 19″ (482mm) Throat Depth: 6″ (152mm) Throat Opening: 14″ (356mm) Capacity: 5 tons (4,536kg) Replacement Parts: #210020 Large Bracket, #210030 Small Bracket, #520050 Pin Heat Treated Steel. Made in the U.S.A.
$427.87$641.73Mo-Clamp 6400 Regular Deep Hook Set
$427.87$641.73 -
Mo-Clamp 3110 Small Flat Nose Sheet Metal Hook, Swivel
MO-Clamp 3110 Small Flat Nose Sheet Metal Hook – Single individual small flat nose hook.
$87.05$118.43Mo-Clamp 3110 Small Flat Nose Sheet Metal Hook, Swivel
$87.05$118.43 -
-
Mo-Clamp 0804 Pull Plate for Tac-N-Pull 4″
MO-Clamp 0804 Pull Plate for Tac-N-Pull 4″
$12.77$16.22Mo-Clamp 0804 Pull Plate for Tac-N-Pull 4″
$12.77$16.22
