-
Mo-Clamp 0100 B Clamp
MO-Clamp 0100 B Clamp – Self-Tightening. The body man’s right arm. It grabs 2¼” (57 mm) of metal, making it ideal for hard pulls on heavy metal or frame. Original wedge. Original straight cut tooth design.
$157.12$230.21Mo-Clamp 0100 B Clamp
$157.12$230.21 -
-
Mo-Clamp 4015 Frame Rack Jaws with Angle Bracket
MO-Clamp 4015 Frame Rack Jaws with Angle Bracket – Will hold down cars with horizontal pinch welds including Honda 1990 and up. Angles can be drilled to fit frame racks, benches, etc. Includes two #4044 1/2 ” Shackles.
Gripping Surface: 13″ wide (330mm) Overall Length: 6″ (406mm) Capacity: 6 tons (5,443kg) Replacement Parts: #5200 Nut, Bolt and washer, 840076 spring #4016 Frame rail angle bracket (1 only) Heat Treated Steel. Made in the U.S.A.
$1,672.60$2,508.58Mo-Clamp 4015 Frame Rack Jaws with Angle Bracket
$1,672.60$2,508.58 -
Mo-Clamp 5626 T26 3/8″ Shackle
MO-Clamp 5626 T26 3/8″ Shackle
$28.01$35.57Mo-Clamp 5626 T26 3/8″ Shackle
$28.01$35.57 -
Mo-Clamp 5090 #9 Tool Board with Hooks
MO-Clamp 5090 #9 Tool Board – Keep your tools organized and in good condition with handy tool boards.
The package includes: #5091 Tool Board with Hooks #0045 Angle Bite Clamp #0054 Mini Spring Clamp #0205 Dyna-Mo C Clamp #0305 Dyna-Mo Jr Clamp #0405 Dyna-Mo W Clamp #2450 Boltless Strut Tower Puller #4058 MAC II Multi-Angle Clamp #5616 Door Post Puller/Twister #5091 Toolboard Dimensions: 2’x2′ Tools are Heat Treated Steel and Made in the U.S.A.
$1,256.12$1,883.95Mo-Clamp 5090 #9 Tool Board with Hooks
$1,256.12$1,883.95 -
Mo-Clamp 5830 Saddle Mate
MO-Clamp 5830 Saddle Mate – For use with your Selsun Air Jack. Unique formed shape gives the Saddle Mate superior strength. Custom die form to fit 99-percent of all automobiles.
Overall Length: 10″ (255mm) Heat Treated Steel. Made in the U.S.A
$65.69$89.38Mo-Clamp 5830 Saddle Mate
$65.69$89.38 -
Mo-Clamp 6308 30″ Sling with Snap Rings
MO-Clamp 6308 30″ Sling with Snap Rings – Use as a safeguard against separation, breakage of temporary welds or clamp failure. Not meant for pulling. Use for restraint of chain and clamps only.
Overall Length: 30″ (762mm) Width: 1″ (25mm) Heat Treated Steel. Made in the U.S.A.
$93.11$126.68Mo-Clamp 6308 30″ Sling with Snap Rings
$93.11$126.68 -
Mo-Clamp 0800 Tac-N-Pull with Pull Plates
MO-Clamp 0800 Tac-N-Pull with Pull Plates – For hard-to-hold pulls. Tack weld one of the reusable plates. Attach clamp and pull. Break tack weld with a grinding cut-off wheel or cutting torch. Includes two 3″ plates, two 1 1/4″ plates, and two 1″ plates.
Gripping Surface: Up to 3″ wide (76 mm) Overall Length: 5-1/2″ (140 mm) Capacity: 3 tons (2,722 kg)
Replacement Parts: #0801 1″ Pull Plate, #0802 1-1/2″ Pull Plate, #0803 3″ Pull Plate or #0805 Tac-N-Pull Plate Kit (includes ten 1″ plates, five 1-1/2″ plates, and five 3″ plates) Heat Treated Steel. Made in the U.S.A.
$175.88$204.02Mo-Clamp 0800 Tac-N-Pull with Pull Plates
$175.88$204.02 -
Mo-Clamp 1255 Large Panel Puller
MO-Clamp 1255 Large Panel Puller – A perfect companion to the smaller 1250, the large panel puller allows the technician to increase the length of contact when pulling a panel into shape. Made of Mo-Clamp Tru-tuff steel alloy, this tool will last a lifetime and is covered by the Mo-Clamp “Forever” warranty. Use it in any situation where you need to get behind a pull. Made in USA.
Capacity: 3 tons (2,722kg) Length: 9″ (22.86cm) Pulling Surface: 4.75″ (12.06cm)
$144.23$211.33Mo-Clamp 1255 Large Panel Puller
$144.23$211.33 -
Mo-Clamp 0307 Dyna-Mo Corner Clamp
MO-Clamp 0307 Dyna-Mo Corner Clamp – With 3 tons of capacity, the Corner Clamp conforms to the exacting standards of all Mo-Clamp products. Made from Mo-Clamp Tru-Tuff heat-treated steel alloy, the 90-degree Corner Clamp uses a drop forged wedge for added strength. Eliminates the need to use two separate clamps and will be able to get into narrow and confined areas.
$166.08$243.34Mo-Clamp 0307 Dyna-Mo Corner Clamp
$166.08$243.34 -
Mo-Clamp 4040 5/8″ X 3-1/2″ GR8 Bolt, Nut, Washer, Spring
MO-Clamp 4040 5/8″ X 3-1/2″ GR8 Bolt, Nut, Washer, Spring
$24.48$31.08 -
Mo-Clamp 0801 Pull Plate for Tac-N-Pull 1″
MO-Clamp 0801 Pull Plate for Tac-N-Pull 1″
$7.86$9.98Mo-Clamp 0801 Pull Plate for Tac-N-Pull 1″
$7.86$9.98
