-
Zinko ZRH-204 20ton 4″ Stroke Hollow Ram
Zinko ZRH-204 20 Ton 4″ Stroke Hollow Ram- Design for use in a variety of applications where lifing, pushing, bending or holding may be required.
High-strength alloy steel construction. Chrome-plated piston rods resist wear and corrosion. Special bearing design helps prevent galling for long life and trouble-free performance. Polyurethane seals and wipers to reduce contamination, extending cylinder life. Hardened saddles keep top bearing and plunger from jamming. Saddle grooves help prevent slipping. Heavy-duty spring enables consistent fast plunger retraction. All models come with fast-flow quick-connection coupler and dust cap. May be used in any position. Hollow plunger design allows for both pull and push forces.Country of Origin: Taiwan
$1,166.84$1,333.53Zinko ZRH-204 20ton 4″ Stroke Hollow Ram
$1,166.84$1,333.53 -
Zinko ZRM-075 75ton 0.63″ Stroke Super Low Cylinder
ZRM Series Single-Acting Low Height Cylinders. These low height cylinders have a flat and compact design for use where other cylinders will not fit. Designed for use where other cylinders will not fit. All models are designed for use in any position and feature base mounting holes for easy attachment to almost any fixture.
Special Features:
Light weight and rugged.
Built for power & mobility.
Designed for use in all positions.
Come with a 3/8″ NPT fast flow coupler.
Mounting holes allow easy mounting on to almost any fixture.
Grooved plunger ends do not require saddle.
Capacity (Tons) :75
Stroke (in) :0.63
Oil Capacity (in³) :10.00
Cylinder Effective Area (in²) :15.90
Minimum Height (in) :3.11
Maximum Heights (in) :3.74
Outside Diameter (in) :6.50 x 5.50
Weight (lbs) :27.000000$1,194.50$1,365.14Zinko ZRM-075 75ton 0.63″ Stroke Super Low Cylinder
$1,194.50$1,365.14 -
Zinko ZML-501J 1/2ton Telescopic Transmission Jack
Zinko ZML-501J 1/2 Ton Telescopic Transmission Jack – Designed for transmission removal or installation of passenger cars, vans and light trucks that are raised by an in ground or above ground lift.
Two stage cylinder that provides a lower pick-up point with high lifting capability.
Universal saddle and corner brackets that are fully adjustable with a safety constraint belt to secure the load.
Foot operated two-stage hydraulics allow for precise load control as well as rapid lifting abilities.
Safety bypass system prevents damage to the cylinder.
Equipped with two release pedals, one for fast lowering without a load and the other for slow lowering with a load.
Ram, pump, and piston are specially finished to prevent oil leakage.
Four-wheel base with locking swivel urethane casters to ensure stability and effortless positioning.Capacity (Tons)0.5
Minimum Height (in)38.78
Maximum Heights (in)75.20
Power Lift (in)36.42
Chassis Length (in)28.70
Chassis Width (in)23.54
Saddle Cradle (degree)42° / 46°Side Title (degree)15°
Weight (lbs)180.000000
Country of Origin: Taiwan$1,194.87$1,365.57Zinko ZML-501J 1/2ton Telescopic Transmission Jack
$1,194.87$1,365.57 -
Static Gun – DF-EZAP – By Dent Fix
Dent Fix DF-EZAP StaticZap – anti-static device that keeps the surface clean during the paint process to avoid unnecessary reworking and buffing, saving both time and money.
Static attracts dust and unwanted particles, making it very difficult to keep surfaces clean and causing blemishes in the paints finish and other work surfaces. Its absolutely essential to eliminate static from the environmentat every stage of paintingin order to avoid costly reworking.
The StaticZap incorporates the efficiency and power of an air amplifier with the proven technology of corona ionization to produce a highly effective anti-static blow-off gun. Perform the anti-static blow off before starting and at every stage in the painting process to eliminate fisheyes and produce a finish that looks like glass.
The two-minute anti-static process will eliminate the need for wet sanding and buffing which saves time on prep work and also cuts down on labor and materials.
The Kit includes a lightweight, durable gun, rechargeable lithium ion battery, two emitter pins, and safety keys.
$1,196.25$1,595.00Static Gun – DF-EZAP – By Dent Fix
$1,196.25$1,595.00 -
Zinko ZRH-206 20ton 6″ Stroke Hollow Ram
Zinko ZRH-206 20 Ton 6″ Stroke Hollow Ram- Design for use in a variety of applications where lifting, pushing, bending or holding may be required.
High-strength alloy steel construction. Chrome-plated piston rods resist wear and corrosion. Special bearing design helps prevent galling for long life and trouble-free performance. Polyurethane seals and wipers to reduce contamination, extending cylinder life. Hardened saddles keep top bearing and plunger from jamming. Saddle grooves help prevent slipping. Heavy-duty spring enables consistent fast plunger retraction. All models come with fast-flow quick-connection coupler and dust cap. May be used in any position. Hollow plunger design allows for both pull and push forces.
Country of Origin: TaiwanMin Ht. 12.05″
$1,263.29$1,443.75Zinko ZRH-206 20ton 6″ Stroke Hollow Ram
$1,263.29$1,443.75 -
Zinko ZR-504A 50ton 4.25″ Stroke Aluminum Single Acting Cylinder
Zinko Aluminum Cylinder is easily carried around and connected to work with any 10,000 psi air over hydraulic pump. These lightweight and rugged cylinders are suitable for almost every heavy lifting situation, in the shop or on the job site.
Special Features:
All models come with 3/8″ NPT fast-flow quick-connection couplers and dust caps.
Made of the strongest aluminum alloys and heat-treated to provide a maximum combination of strength and fracture resistance.
Grooved saddles for stability.
Steel base-plated for increased durability.
Optional valve to control cylinder speed can also be used as shut off valve for temporary load holding.
Optional aluminum base provides extra support and stability for the 50 ton cylinders.More Information
Capacity (Tons) :50
Stroke (in) :4.25
Oil Capacity (in³) :43
Minimum Height (in) :9.29
Maximum Heights (in) :13.22
Outside Diameter (in) :5.11
Cylinder Bore Diameter (in) :3.74
Plunger Diameter (in) :3.15
Base to Adv. Port (in) :1.18
Saddle Diameter (in) :1.96
Weight (lbs) :29.000000$1,271.37$1,452.99Zinko ZR-504A 50ton 4.25″ Stroke Aluminum Single Acting Cylinder
$1,271.37$1,452.99 -
Zinko ZR-306A 30ton 6″ Stroke Aluminum Cylinder
Zinko ZR-306A 30 Ton 6″ Stroke Aluminum Cylinder
Light weight and rugged. Built for power & mobility. Designed for use in all positions. Equipped standard with grooved saddles. Steel base-plated for increased durability. All body, base and plunger are hard coat anodized. The highest strengths of aluminum alloys are used and heat treated to provide the maximize combination of strength and fracture resistance.
Country of Origin: Taiwan
Min Ht. 10.79″ MAXIMUM OPERATION: 10,000 PSI$1,361.54$1,556.04Zinko ZR-306A 30ton 6″ Stroke Aluminum Cylinder
$1,361.54$1,556.04 -
Zinko Zml-500 1/2ton Transmission Jack
Designed for transmission removal, transport, and installation in passenger cars, vans, and light trucks that are lifted by an in-ground or above-ground lift.
Special Features:Two stage cylinder that provides a low pick-up point with high lifting capability.
Universal saddle and corner brackets that are fully adjustable with a safety constraint belt to secure your load.
Foot operated two-stage hydraulics allow for precise load control as well as rapid lifting abilities.
Safety bypass system that prevents damage to the cylinder.
Equipped with two release pedals, one for fast lowering without a load and the other provides slow lowering with a load.
Ram, pump, and piston are specially finished to prevent oil leakage.
Four-wheel base with locking swivel urethane casters to ensure stability and effortless positioning.
More Information
Capacity (Tons) :0.5
Minimum Height (in) :39.88
Maximum Heights (in) :68.89
Power Lift (in) :29.01
Chassis Length (in) :33.26
Chassis Width (in) :33.26
Saddle Cradle (degree) :30° / 15°
Side Title (degree) :15°
Weight (lbs) :193.000000$1,365.41$1,560.47Zinko Zml-500 1/2ton Transmission Jack
$1,365.41$1,560.47 -
Dentfix DF-595II Hammer Head Removal System
Dent Fix DF-595II Hammer Head Dent Removal System –
Replace your stud welder with the 110 volt DF-595ii HammerHead. Same great quality, same essential accessories that provides the technician with the means to higher productivity and better results. It’s like having sticky fingers and being able to pull dent with your hand.
110 Volt
1 year warranty.
60Lbs
Formerly Know as Shark 2 Dent remover (Name changed by Manufacturer)
Included Items:
Weld pin Tip (1), Washer Tip (1), Shrink Tip (1), Wiggle Wire Tip (1), Short Pull Rod (1), Slide Hammer With Rod and Weight (1), Leverage Rod (1), Ground Magnet (1), # Finger Claw, & 1Pound of Wiggle WireMade in China. 1 year warranty. Use with a 30 amp breaker.
$1,396.34$1,586.75Dentfix DF-595II Hammer Head Removal System
$1,396.34$1,586.75 -
Zinko ZSJ-50H 5ton Heavy Duty Service Jack
These heavy-duty service jacks are compact and designed for use on a wide range of automobiles. From sedans to light trucks and vans, the ZSJ Series is the professional’s choice for quick, efficient chassis lifting.
Special Features:
Overall construction from selected steel frame, full swivel rear caster wheels.
Extra long chassis reaches under low overhangs.
Ductile steel saddle for better grip and vehicle frame protection.
Overload safety valve
More Information
Capacity (Tons) :5
Minimum Height (in) :5.90
Hydraulic Lift (in) :16.14
Maximum Heights (in) :22.04
Chassis Length (in) :55.70
Chassis Width (in) :14.37
Height of Frame (in) :7.87
Weight (lbs) :241.000000$1,400.70$1,600.80Zinko ZSJ-50H 5ton Heavy Duty Service Jack
$1,400.70$1,600.80 -
Body Buggy Chassis Roller – 4′
Body Buggy Chassis Roller – 4′ – Quick and safe method to transport disabled vehicles on and off a rack and around the shop or into a paint booth. MADE IN THE USA!
After a simple five minute installation, the unit becomes “part of the vehicle”, negating the need to employ any unstable or dangerous lift points. The included spacer kit allows for the use of original fasteners, alleviating the need for any additional fastener inventory. When installed, the vehicle is easily rolled onto a frame rack, into a paint booth or to storage, out of the way of production. The device can be installed on the front or rear of most any vehicle using the cradle or sub-frame mounting points and hardware. The Body Buggy has a max weight rating of 4,500 lbs and includes a 5 year warranty.
INCLUDED: Main Beam (4 Foot), Wheel Assemblies, Sliding Lock Collars, Mounting Brackets (2 Pairs of different heights), Hitch Pins & Clips, Fitment Pin Spacer, Storage Crate, and 10 pc Spacer Kit.
Free up Rack Space with the patented Body Buggy DF-BB104
$1,407.69$1,599.65Body Buggy Chassis Roller – 4′
$1,407.69$1,599.65 -
Body Buggy Chassis Roller – 5′
Body Buggy Chassis Roller – 5′ – Quick and safe method to transport disabled vehicles on and off a rack and around the shop or into a paint booth. MADE IN THE USA!
After a simple five minute installation, the unit becomes “part of the vehicle”, negating the need to employ any unstable or dangerous lift points. The included spacer kit allows for the use of original fasteners, alleviating the need for any additional fastener inventory. When installed, the vehicle is easily rolled onto a frame rack, into a paint booth or to storage, out of the way of production. The device can be installed on the front or rear of most any vehicle using the cradle or sub-frame mounting points and hardware. The Body Buggy has a max weight rating of 4,500 lbs and includes a 5 year warranty.
INCLUDED: Main Beam (5 Foot), Wheel Assemblies, Sliding Lock Collars, Mounting Brackets (2 Pairs of different heights), Hitch Pins & Clips, Fitment Pin Spacer, Storage Crate, and 10 pc Spacer Kit.
Free up Rack Space with the patented Body Buggy DF-BB105
$1,501.86$1,706.65Body Buggy Chassis Roller – 5′
$1,501.86$1,706.65
