-
-
Mo-Clamp 0250 Mini C Clamp
MO-Clamp 0250 Mini C Clamp – Self-tightening. Small, light, versatile. Has a minimum of 1½” (38 mm) throat clearance to reach around flanges, cowls, pinch welds and lips. Butts against panels where only narrow bite is available. 1½” (38 mm) jaws give added grip. Original wedge. Original straight cut tooth design.
$143.53$210.30Mo-Clamp 0250 Mini C Clamp
$143.53$210.30 -
Mo-Clamp 0451 Flash Clamp 3ton Capacity
MO-Clamp 0451 Flash Clamp 3 Ton Capacity. Spring-loaded operation makes each clamp easy to use. Mo-Grip surface and pivoting head allows for a secure grip on almost any surface. Heat-treated investment cast jaws provide years of effective pulling power. Drop-forged wedge. Jaws can be easily replaced.
Capacity: 3 tons (2,722 kg) Length: 8″ (203 mm) Width: 1½” (38 mm) Replacement Parts: #045103 Pivot Jaw, #010704 Wedge, #520038 Pivot Pins, #520031 Retaining Bolt, #840076 Spring Heat Treated Steel. Made in the U.S.A.
$245.32$367.93Mo-Clamp 0451 Flash Clamp 3ton Capacity
$245.32$367.93 -
Mo-Clamp 0655 Dyna-Mo Box Clamp
MO-Clamp 0655 Dyna-Mo Box Clamp – These heat-treated jaws reach around flanges and other obstructions to get a grip on hard-to-reach surfaces. Severe duty tooth design for aggressive pulling power.
Gripping Surface: 1¼” wide (32 mm), ½” deep (10 mm) Overall Length: 8″ (201 mm) Capacity: 3 tons (2,722 kg) Replacement Parts: #9702 Wedge, #5254 Nut, Bolt, Spring & Washer Heat Treated Steel. Made in the U.S.A.
$146.09$214.05Mo-Clamp 0655 Dyna-Mo Box Clamp
$146.09$214.05 -
Mo-Clamp 7051 Baby Tram Gauge with Cardboard Box
MO-Clamp 7051 Baby Tram Gauge with Cardboard Box – Tram Instruments are a versatile and indispensable tool for determining collision damage to uni-body cars and for checking critical measurements during repair. Use the tram to check dimensions between control points on suspension and mechanical components. The Tram Instrument makes it easy to establish dimensions around components and to check contours by comparing measurements from one side of the vehicle to the other. Measures from 2-1/2″ (65mm) to 7′ (2.1m). Level bubble installed in sliding head for accuracy in measurement. Comes in a cardboard box. Made in the U.S.A.
$757.24$1,135.72Mo-Clamp 7051 Baby Tram Gauge with Cardboard Box
$757.24$1,135.72 -
Mo-Clamp 6210 3/8″ Alloy Clevis Grab Hook
MO-Clamp 6210 3/8″ Alloy Clevis Grab Hook
$34.40$43.68Mo-Clamp 6210 3/8″ Alloy Clevis Grab Hook
$34.40$43.68 -
Mo-Clamp 4050 Multi-Angle Clamp
MO-Clamp 4050 Multi-Angle Clamp – The versatile Multi-Angle Clamp permits pulling from any direction within a 180-degree arc. The multi-angle side pull plate makes two-way pulling faster and easier. Hardened gator teeth firmly grip narrow seams and pinch welds. Clamp has “bolt stoppers” to hold bolts stationary, for easy tightening.
Gripping Surface: 3-1/2″ wide (95 mm), 1/2 ” deep (19 mm) Overall Length: 7″ (178 mm) Capacity: 4 tons (3,629 kg) Replacement Parts: #5325 Nut, Bolt & Washer, #200131 Side Pull Bracket Heat Treated Steel. Made in the U.S.A.
$243.64$365.42Mo-Clamp 4050 Multi-Angle Clamp
$243.64$365.42 -
Mo-Clamp 4035 Angle Bracket
MO-Clamp 4035 Angle Bracket – Bolt to surface for a 90-degree straight pull or use with #4030 3-Way Pull Clamp, pair of #4025 Frame Rack Jaws or #4010 Frame Rack Unibody Clamp..
Overall Length: 6″ (152 mm) Capacity: 6 tons (5,443 kg) Heat Treated Steel. Made in the U.S.A.
$91.73$124.80Mo-Clamp 4035 Angle Bracket
$91.73$124.80 -
Mo-Clamp 3120 Small Round Nose Sheet Metal Hook, Swivel
MO-Clamp 3120 Small Round Nose Sheet Metal Hook, Swivel – Single individual small round nose hook.
$81.41$110.76Mo-Clamp 3120 Small Round Nose Sheet Metal Hook, Swivel
$81.41$110.76 -
Mo-Clamp 1900 Quick Hook
MO-Clamp 1900 Quick Hook – Four hole-size selection for quick hook-ups in existing frame holes for pulling of damaged frames. Uses Mo-Clamp’s easy chain hook-up system. Hole sizes: 1-7/8″ (48 mm), 1-5/8″ (41 mm), 1″ (25 mm), 7/8″ (22 mm).
Overall Length: 6-1/2″ (165 mm) Capacity: 4 tons (3,629 kg) Heat Treated Steel. Made in the U.S.A.
$115.58$157.25Mo-Clamp 1900 Quick Hook
$115.58$157.25 -
Mo-Clamp 210070 Replacement Vertical Bracket
MO-Clamp 210070 Replacement Vertical Bracket
$85.31$116.07Mo-Clamp 210070 Replacement Vertical Bracket
$85.31$116.07 -
Mo-Clamp 1650 Double Eye Chain Hook
MO-Clamp 1650 Double Eye Chain Hook – A handy chain hook-up pulling plate for making double pulls. The special design allows for both wide or narrow pulls. Double pulls, using multiple self-tightening clamps, can be made from the same pulling tower or pulling post. Features Mo-Clamp easy chain hook-up system. Designed for use with 3/8″ chain.
Overall Length: 6-1/2″ (165 mm) Capacity: 5 tons (4,536 kg) Heat Treated Steel. Made in the U.S.A.
$146.77$199.69Mo-Clamp 1650 Double Eye Chain Hook
$146.77$199.69
