-
Mo-Clamp 6317 “J” Hook with 5/16″ Anodized Chain
MO-Clamp 6317 “J” Hook with Chain – Original shipping tie down for ALL vehicles. Excellent around the frame machine to help hold a frame while diamond is being pulled.
Overall Length 6″ (228mm) Capacity 4 tons (3,629kg)
$61.25$77.78Mo-Clamp 6317 “J” Hook with 5/16″ Anodized Chain
$61.25$77.78 -
Mo-Clamp 5220 Clevis Pin and Rue
MO-Clamp 5220 Clevis Pin & Rue
$12.19$15.48Mo-Clamp 5220 Clevis Pin and Rue
$12.19$15.48 -
Mo-Clamp 4021 Frame Rack Dyna-Mo #1
MO-Clamp 4021 Frame Rack Dyna-Mo #1 – One pair Frame Rack Dyna-mo jaws with 7″ draw bar, one side pull bracket, shackle and oval loop. Raised “ears” to hold bolt in place while tightening. Machine tooth design.
Gripping Surface: 3-1/2″ wide (95 mm) Overall Length: 7″ (178 mm) Capacity: 5 tons (4,536 kg) Replacement Parts: #4043 Oval Loop, #4055 7/16″ Shackle, #5200 Nut, Bolt & Washer, #200203 Side Pull Bracket Heat Treated Steel. Made in the U.S.A.
$300.22$450.27Mo-Clamp 4021 Frame Rack Dyna-Mo #1
$300.22$450.27 -
Mo-Clamp 3051 T-top Anchor Pot (1 Only)
MO-Clamp 3051 T-Top Anchor Pot – An anchoring system for versatile pulling. Insert 3/8″ frame straightening chain, anchor with lock cap, and pull from any direction or angle. Lock cap keeps out dirt and dust when not in use. Includes sleeve and lock cap. 3-1/2″ (89mm) cored hole required. 3060 Cast-in Model is available for new floors.
Capacity: 10 tons (9,072 kg) Replacement Parts: #300210 Welded Cap Heat Treated Steel. Made in the U.S.A.
$148.28$201.74Mo-Clamp 3051 T-top Anchor Pot (1 Only)
$148.28$201.74 -
Mo-Clamp 5010 #1 Tool Board
MO-Clamp 5010 #1 Tool Board with Tools Including:
- #0100 B Clamp
- #0200 C Clamp
- #0300 JR Clamp
- #0400 W Clamp
- 2- #1200 Twin Pull
- #1300 Sill Hook
- #1800 Track Hook
- #5011 Tool Board with Hooks
#5011 Toolboard Dimensions: 2’x2′ Tools are Heat Treated Steel and Made in the U.S.A
$1,418.79$2,127.92Mo-Clamp 5010 #1 Tool Board
$1,418.79$2,127.92 -
Mo-Clamp 6311 Ford “T” Hook with 3/8″ X 12″ Chain
MO-Clamp 6311 Ford “T” Hook with 3/8″ X 12″ Chain – Original shipping tie down for Ford vehicles. Excellent around the frame machine to help hold a frame while diamond is being pulled.
Overall Length 6″ (228mm) Capacity 4 tons (3,629kg)
$58.97$74.88Mo-Clamp 6311 Ford “T” Hook with 3/8″ X 12″ Chain
$58.97$74.88 -
Mo-Clamp 1340 Bolt Puller
MO-Clamp 1340 Bolt Puller – Made for those difficult to get at suspension and frame bolts that need the area they screw into realigned or straightened. Use this for up to a 2.5 ton pull and be certain you are dead center over the bolt area. Uses the oem bolt to pull against the threads with. Just loosen the bolt enough to get the tool cradle under the head and re-tighten a few turns to assure no thread loss and pull away.
Overall length: 6″ (152mm) Capacity 2.5 tons (2.268kg) Made in USA
$79.48$108.14Mo-Clamp 1340 Bolt Puller
$79.48$108.14 -
Mo-Clamp 4065 All Angle Clamp
MO-Clamp 4065 All Angle Clamp – One of the toughest little clamps we have ever built. Both straight pull or right angle with an infinite twist capability. Mo-Grip surface has been applied to the jaw surfaces for a better bite on the new carbon and UHSS steels.
Jaw Width 1-7/8″ Throat Depth 1″
$200.83$294.25Mo-Clamp 4065 All Angle Clamp
$200.83$294.25 -
Mo-Clamp 0450 Flash Clamp 5ton
MO-Clamp 0450 Flash Clamp 5 Ton – New Mo-Grip surfaced jaws provide superior traction when coupled with pivoting head for uneven surfaces. Spring-loaded operation means no impacting to tighten. Heat-treated investment cast jaws provide years of effective pulling power. Drop-forged wedge. Jaws can be easily replaced.
Capacity: 5 tons (4,536 kg) Length: 8″ (203 mm) Width: 2″ (50.7 mm) Weight: 3 lbs (1.36 kg) Replacement Parts: #010453 Pivot Jaw, #010702 Small Round Wedge, #520039 Pivot Pins, #520033 Retaining Bolt, #840076 Spring Heat Treated Steel. Made in the U.S.A.
$289.23$433.79Mo-Clamp 0450 Flash Clamp 5ton
$289.23$433.79 -
Mo-Clamp 1200 Twin Pull
MO-Clamp 1200 Twin Pull – Do you have need for a light pull but a larger gripping area? The Twin Pull enables you to use two clamps side by side for more pull. Also, can be used with two #1300 Sill Hooks. Designed for use with 3/8″ chain.
Overall Length: 5″ (127 mm) Width: 3″ (76 mm) Between Pulls Capacity: 6 tons (5,443 kg) Heat Treated Steel. Made in the U.S.A.
$96.32$131.05Mo-Clamp 1200 Twin Pull
$96.32$131.05 -
Mo-Clamp 4060 Mity Bite Clamp
MO-Clamp 4060 Mity Bite Clamp – Makes possible one- or two-directional pulling and can be used in a confined area. Gator teeth grip metal firmly.
Gripping Surface: 2″ wide (51 mm) Overall Length: 8-1/2″ (21 mm) Capacity: 3 tons (2,722 kg) Replacement Parts: #5225 Nut, Bolt & Washer Heat Treated Steel. Made in the U.S.A.
$178.92$262.15Mo-Clamp 4060 Mity Bite Clamp
$178.92$262.15 -
Mo-Clamp 1100 Handy Link
MO-Clamp 1100 Handy Link – Chain too long? Make it shorter! Chain to short? Make it longer! Alloy heat-treated steel. Pulling slots can be used with #0900 Hole Pull Adapters. Designed for use with 3/8″ chain.
Overall Length: 6-1/2″ (165 mm) Capacity: 5 tons (4,536 kg) Heat Treated Steel. Made in the U.S.A.
$104.67$132.92Mo-Clamp 1100 Handy Link
$104.67$132.92
