-
Mo-Clamp 3051 T-top Anchor Pot (1 Only)
MO-Clamp 3051 T-Top Anchor Pot – An anchoring system for versatile pulling. Insert 3/8″ frame straightening chain, anchor with lock cap, and pull from any direction or angle. Lock cap keeps out dirt and dust when not in use. Includes sleeve and lock cap. 3-1/2″ (89mm) cored hole required. 3060 Cast-in Model is available for new floors.
Capacity: 10 tons (9,072 kg) Replacement Parts: #300210 Welded Cap Heat Treated Steel. Made in the U.S.A.
$148.28$201.74Mo-Clamp 3051 T-top Anchor Pot (1 Only)
$148.28$201.74 -
Mo-Clamp 4021 Frame Rack Dyna-Mo #1
MO-Clamp 4021 Frame Rack Dyna-Mo #1 – One pair Frame Rack Dyna-mo jaws with 7″ draw bar, one side pull bracket, shackle and oval loop. Raised “ears” to hold bolt in place while tightening. Machine tooth design.
Gripping Surface: 3-1/2″ wide (95 mm) Overall Length: 7″ (178 mm) Capacity: 5 tons (4,536 kg) Replacement Parts: #4043 Oval Loop, #4055 7/16″ Shackle, #5200 Nut, Bolt & Washer, #200203 Side Pull Bracket Heat Treated Steel. Made in the U.S.A.
$300.22$450.27Mo-Clamp 4021 Frame Rack Dyna-Mo #1
$300.22$450.27 -
Mo-Clamp 5220 Clevis Pin and Rue
MO-Clamp 5220 Clevis Pin & Rue
$12.19$15.48Mo-Clamp 5220 Clevis Pin and Rue
$12.19$15.48 -
Mo-Clamp 6317 “J” Hook with 5/16″ Anodized Chain
MO-Clamp 6317 “J” Hook with Chain – Original shipping tie down for ALL vehicles. Excellent around the frame machine to help hold a frame while diamond is being pulled.
Overall Length 6″ (228mm) Capacity 4 tons (3,629kg)
$61.25$77.78Mo-Clamp 6317 “J” Hook with 5/16″ Anodized Chain
$61.25$77.78 -
Mo-Clamp 5711 Mo-Wedge
MO-Clamp 5711 MO-Wedge – High impact polycarbonate plastic. Great for spreading damaged body panels. Used with Mo-Block Dolly for straightening out the rail pocket.
Overall Length: 5-1/2″ (140mm) Heat Treated Steel. Made in the U.S.A.
$8.76$11.13Mo-Clamp 5711 Mo-Wedge
$8.76$11.13 -
Mo-Clamp 3100 Sheet Metal Hooks – Set
MO-Clamp 3100 Sheet Metal Hooks – Set – Alloy heat-treated hooks increase pulling options. May be used with Hole Pull Plates (#0810 & 0820) to pull, or use in combination with clamps. Includes one of each: #3110, #3120, #3130, #3140.
Capacity: 2 tons (1,814 kg) Replacement Parts: #4051 Eye Nut, #3110 Small Flat Nose Hook, #3120 Small Round Nose Hook, #3130 Large Flat Nose Hook, #3140 Large Round Nose Hook Heat Treated Steel. Made in the U.S.A.
$291.25$436.82Mo-Clamp 3100 Sheet Metal Hooks – Set
$291.25$436.82 -
Mo-Clamp 6304 60″ Reinforced Nylon Sling
MO-Clamp 6304 60″ Reinforced Nylon Sling – Protects finish from mars. With inside Mo-Guard protective covering for extra long life.
Overall Length: 60″ (1,525mm) Width: 3″ (76mm) Vertical Capacity: 2.5 tons (2,267kg) Choke Capacity: 2 tons (1,814kg) Basket Capacity: 5 tons (4,536 kg) Made in the U.S.A.
$132.43$194.04Mo-Clamp 6304 60″ Reinforced Nylon Sling
$132.43$194.04 -
Mo-Clamp 2460 Radiator Core Support Puller
MO-Clamp 2460 Radiator Core Support Puller – A simple to operate two piece tool designed expressly for radiator core support brackets and body/cab mount brackets on full frame vehicles. The tool addresses several sizes with both a large and small bracket adapter allowing the technician to “sandwich” the brackets so those tough pulls and twists can be made.
Length: 7″ Width: 3.5″ Capacity: 3 tons Replacement Parts: 510080 bolt, 510061 washer, 510010 nut
$189.69$277.93Mo-Clamp 2460 Radiator Core Support Puller
$189.69$277.93 -
Mo-Clamp 1100 Handy Link
MO-Clamp 1100 Handy Link – Chain too long? Make it shorter! Chain to short? Make it longer! Alloy heat-treated steel. Pulling slots can be used with #0900 Hole Pull Adapters. Designed for use with 3/8″ chain.
Overall Length: 6-1/2″ (165 mm) Capacity: 5 tons (4,536 kg) Heat Treated Steel. Made in the U.S.A.
$104.67$132.92Mo-Clamp 1100 Handy Link
$104.67$132.92 -
Mo-Clamp 4060 Mity Bite Clamp
MO-Clamp 4060 Mity Bite Clamp – Makes possible one- or two-directional pulling and can be used in a confined area. Gator teeth grip metal firmly.
Gripping Surface: 2″ wide (51 mm) Overall Length: 8-1/2″ (21 mm) Capacity: 3 tons (2,722 kg) Replacement Parts: #5225 Nut, Bolt & Washer Heat Treated Steel. Made in the U.S.A.
$178.92$262.15Mo-Clamp 4060 Mity Bite Clamp
$178.92$262.15 -
Mo-Clamp 1200 Twin Pull
MO-Clamp 1200 Twin Pull – Do you have need for a light pull but a larger gripping area? The Twin Pull enables you to use two clamps side by side for more pull. Also, can be used with two #1300 Sill Hooks. Designed for use with 3/8″ chain.
Overall Length: 5″ (127 mm) Width: 3″ (76 mm) Between Pulls Capacity: 6 tons (5,443 kg) Heat Treated Steel. Made in the U.S.A.
$96.32$131.05Mo-Clamp 1200 Twin Pull
$96.32$131.05 -
Mo-Clamp 0450 Flash Clamp 5ton
MO-Clamp 0450 Flash Clamp 5 Ton – New Mo-Grip surfaced jaws provide superior traction when coupled with pivoting head for uneven surfaces. Spring-loaded operation means no impacting to tighten. Heat-treated investment cast jaws provide years of effective pulling power. Drop-forged wedge. Jaws can be easily replaced.
Capacity: 5 tons (4,536 kg) Length: 8″ (203 mm) Width: 2″ (50.7 mm) Weight: 3 lbs (1.36 kg) Replacement Parts: #010453 Pivot Jaw, #010702 Small Round Wedge, #520039 Pivot Pins, #520033 Retaining Bolt, #840076 Spring Heat Treated Steel. Made in the U.S.A.
$289.23$433.79Mo-Clamp 0450 Flash Clamp 5ton
$289.23$433.79
