-
Mo-Clamp 0680 Big Mouth Clamp
MO-Clamp 0680 Big Mouth Clamp – Self-tightening. A perfect solution for hard-to-get-to areas. Great where large opening is needed. Original wedge; cross-hatch tooth design; spring-loaded for easy opening. Throat clearance of 2¼” high (57 mm), 1¼” deep (32 mm).
Gripping Surface: 1¾” wide (45 mm), 1″ deep (25 mm) Overall Length: 9½” (241 mm) Capacity: 5 tons (4,536 kg) Replacement Parts: #9701 Wedge, #5253 Nut, Bolt, Spring & Washer Heat Treated Steel. Made in the U.S.A.
$255.60$374.50Mo-Clamp 0680 Big Mouth Clamp
$255.60$374.50 -
Mo-Clamp 4016 Frame Rack Angle Bracket Only
MO-Clamp 4016 Frame Rack Angle Bracket Only – Will hold down cars with horizontal pinch welds including Honda 1990 and up. Angles can be drilled to fit frame racks, benches, etc. Includes two #4044 1/2 ” Shackles.
Does Not Include Jaws.
$486.80$730.11Mo-Clamp 4016 Frame Rack Angle Bracket Only
$486.80$730.11 -
Mo-Clamp 0802 Pull Plate for Tac-N-Pull 1-1/2″
MO-Clamp 0802 Pull Plate for Tac-N-Pull 1-1/2″
$8.84$11.23Mo-Clamp 0802 Pull Plate for Tac-N-Pull 1-1/2″
$8.84$11.23 -
Mo-Clamp 1360 Junior Versa Hook
MO-Clamp 1360 Junior Versa Hook – The Junior Versa Hook is designed smaller to allow body men to get into tighter areas. The Junior Versa Hook end is only 1-3/4″ wide for pulling on rocker panels, door posts, etc. The back lip is used for a tie-down to secure the vehicle during pulls. The narrow width permits use on frame racks with smaller slots. Designed for use with 3/8″ chain.
Gripping Surface: 1-3/4″ wide (45 mm), 1″ deep (25 mm) Overall Length: 9″ (229 mm) Width: 1-3/4″ (45 mm) Capacity: 5 tons (4,536 kg) Heat Treated Steel. Made in the U.S.A.
$175.83$257.62Mo-Clamp 1360 Junior Versa Hook
$175.83$257.62 -
Mo-Clamp 3130 Large Flat Nose Sheet Metal Hook, Swivel
MO-Clamp 3130 Large Flat Nose Sheet Metal Hook, Swivel – Single individual large flat nose hook.
$95.86$130.42Mo-Clamp 3130 Large Flat Nose Sheet Metal Hook, Swivel
$95.86$130.42 -
Mo-Clamp 1500 Pull Ring
MO-Clamp 1500 Pull Ring – The Pull Ring for the #2100 2MA Adapter Plate for unlimited body and frame pulls, such as frame horns, brackets, cowls, etc. Has recessed pockets to hold bolts stationary for easy, one-handed tightening.
Overall Length: 4-1/2″ (114 mm) Capacity: 5 tons (4,536 kg) Replacement Parts: #5350 Nut & Bolt Heat Treated Steel. Made in the U.S.A.
$96.32$131.05Mo-Clamp 1500 Pull Ring
$96.32$131.05 -
Mo-Clamp 6013 3/8″ X 12′ Chain with Alloy Slip Hook
Mo-Clamp 10 Ton Tower Chain
With Removable Slip Hook$182.73$267.74Mo-Clamp 6013 3/8″ X 12′ Chain with Alloy Slip Hook
$182.73$267.74 -
Mo-Clamp 5852 Large Tong Clamp
MO-Clamp 5852 Large Tong Clamp – Pivoting jaws on all tong clamps assure a secure grip across the entire gripping surface on pulls up to 5 tons. Made of Tru-Tuff heat-treated steel alloy.
Overall Length: 10.5″ (267mm) Capacity: 5 tons (4,536kg) Throat Depth: 5″ (127mm) Max Opening: 6.5″ (165mm) Throat Closed: 4.25″ (108mm) Heat Treated Steel. Made in the U.S.A.
$457.10$685.57Mo-Clamp 5852 Large Tong Clamp
$457.10$685.57 -
Mo-Clamp 0804 Pull Plate for Tac-N-Pull 4″
MO-Clamp 0804 Pull Plate for Tac-N-Pull 4″
$12.77$16.22Mo-Clamp 0804 Pull Plate for Tac-N-Pull 4″
$12.77$16.22 -
-
Mo-Clamp 3110 Small Flat Nose Sheet Metal Hook, Swivel
MO-Clamp 3110 Small Flat Nose Sheet Metal Hook – Single individual small flat nose hook.
$87.05$118.43Mo-Clamp 3110 Small Flat Nose Sheet Metal Hook, Swivel
$87.05$118.43 -
Mo-Clamp 6400 Regular Deep Hook Set
MO-CLAMP 6400 REGULAR DEEP HOOK SET – For fast hook-ups on cowls, door posts and trunk openings, or to reach into cramped places. #210030 Small Bracket (2″ x 3″) and #210020 Large Bracket (2″ x 9″) included.
Overall Length: 19″ (482mm) Throat Depth: 6″ (152mm) Throat Opening: 14″ (356mm) Capacity: 5 tons (4,536kg) Replacement Parts: #210020 Large Bracket, #210030 Small Bracket, #520050 Pin Heat Treated Steel. Made in the U.S.A.
$427.87$641.73Mo-Clamp 6400 Regular Deep Hook Set
$427.87$641.73
