-
Mo-Clamp 6600 Chain Snugger
MO-Clamp 6600 Chain Snugger – Tightens chain when used with a #1700 Chain Locking Fork on frame racks and other applications.
Overall Length: 12″ (305mm) Capacity: 6 tons (5,443kg) Heat Treated Steel. Made in the U.S.A.
$149.06$218.41Mo-Clamp 6600 Chain Snugger
$149.06$218.41 -
Mo-Clamp 4146 Grab Hook/Slip Hook Combo
MO-Clamp 4146 Grab Hook/Slip Hook Combo – Grab hook on one end; slip hook on the other. For hooking into clamps or pull rings. Fast hook-up to any section of 3/8″ chain.
Overall Length: 9-1/2″ (241 mm) Capacity: 7 tons (6,350 kg) Heat Treated Steel. Made in the U.S.A.
$100.21$136.34Mo-Clamp 4146 Grab Hook/Slip Hook Combo
$100.21$136.34 -
Mo-Clamp 0808 Maxi Tac-N-Pull
MO-Clamp 0808 Maxi Tac-N-Pull – A new tool that is the step up from our old standard, the #0800. This is the big brother for those pulls on creases and bends that demand a heavier pull. Or perhaps a pull that requires some twist to follow the sheet metal out the way it went in. This Tac-N-Pull has all of the finesse given to you by the first tool, #0805, PLUS, you have two more pulling points to add twist to your pull for that final tweak. Use with #1150 Chain Spreader Bar for multiple pulls in a heavily damaged area. These tools will help get more use out of your frame machine. Giving the technician options is what makes Mo-Clamp the best.
Design allows for uneven pulls and getting around obstructions Made of Mo-Clamp Tru-Tuff Steel Alloy Covered by the Mo-Clamp forever warranty Can use all 5 sizes of different pull plates in whatever combination necessary Comes with 2 – 4″ pull plates (0804) and 2 – 6″ pull plates (0806) Height: 9″ Capacity: 3 Tons
$374.55$561.75Mo-Clamp 0808 Maxi Tac-N-Pull
$374.55$561.75 -
Mo-Clamp 5400 Nuts and Bolts Jobber Pack
MO-Clamp 5400 Nuts and Bolts Jobber Pack – Most commonly used bolts, nuts, washers, and clevis pins. A diagram on the box helps you immediately locate the part you need. Mo-clamp bolts have special grades of material and are heat-treated to our specifications. Contains Grade 5 and Grade 8 bolts specific to individual Mo-Clamp tools.
$411.90$617.78Mo-Clamp 5400 Nuts and Bolts Jobber Pack
$411.90$617.78 -
Mo-Clamp 850059 8″ Pointer for 7000/7001/7050
MO-Clamp 850059 8″ Pointer for 7000/7001/7050
$88.08$119.84Mo-Clamp 850059 8″ Pointer for 7000/7001/7050
$88.08$119.84 -
Mo-Clamp 7055 Delrin Cone and Pointer
MO-Clamp 7055 Delrin Cone and Pointer – Made of tough Delrin Plastic. Designed to fit all Mo-Clamp trams including baby tram and #7000. Allows centering of holes for easier one-man tramming on underside of vehicles and engine compartments. Will make sure you are centered on those holes for precise measurements.
Size: 2″ cubed Made in USA
$143.10$209.67Mo-Clamp 7055 Delrin Cone and Pointer
$143.10$209.67 -
Mo-Clamp 850019 Thumb Screw for 7000/7001/7050 Trams
MO-Clamp 850019 Thumb Screw for 7000/7001/7050 (Parts Breakdown shown above: Thumb screw is #3-requires Qty of 8).
$1.37$1.45 -
Mo-Clamp 9450 4 Way Leg with Washer and Bolt for MO-2400
MO-Clamp 9450 4 Way Leg with Washer & Bolt
$121.70$178.32Mo-Clamp 9450 4 Way Leg with Washer and Bolt for MO-2400
$121.70$178.32 -
Mo-Clamp 2450 Boltless Strut Tower Puller
MO-Clamp 2450 Boltless Strut Tower Puller – Easy, fast, reliable method for pulling strut towers. Developed for strut towers without bolts, to correct chassis dimensions to factory specifications. Strut tower removal is necessary.
Overall Length: 5″ (127 mm) Capacity: 3 tons (2,722 kg) Replacement Parts: #4051 Eye Nut, #100441 Numerous Angle Puller, #500053 Bolt Heat Treated Steel. Made in the U.S.A.
$268.42$402.58Mo-Clamp 2450 Boltless Strut Tower Puller
$268.42$402.58 -
Mo-Clamp 6303 60″ Nylon Sling
MO-Clamp 6303 60″ Nylon Sling – Protects finish from mars.
Overall Length: 60″ (1,525mm) Width: 3″ (76mm) Vertical Capacity: 2.5 tons (2,267kg) Choke Capacity: 2 tons (1,814kg) Basket Capacity: 5 tons (4,536 kg) Replacement Parts: #62101 Clevis Pin, #62102 Rue Clip Made in the U.S.A.
$104.97$142.81Mo-Clamp 6303 60″ Nylon Sling
$104.97$142.81 -
Mo-Clamp 6381 Mo-Flex Sling 60″
MO-Clamp 6381 MO-Flex Sling 60″ – Mo-Flex slings are extremely flexible to conform more easily to the curve of surfaces being pulled. The protective pad slips around the sling to provide protection to the sling when wrapped around sharp objects.
Overall Length: 60″ Width: 2″ (51mm) Vertical Capacity: 5,300 lbs (2,403kg) Choke Capacity: 4,200 lbs (1,905kg) Basket Capacity: 10,600 lbs (4,807 kg) Made in the U.S.A.
$105.07$142.95Mo-Clamp 6381 Mo-Flex Sling 60″
$105.07$142.95 -
Mo-Clamp 0305 Dyna-Mo Jr Clamp
MO-Clamp 0305 Dyna-Mo Jr Clamp – New generation of Mo-Clamps. Self-tightening. Thin-edged nose for getting into hard-to-reach places. Drop-forged round wedge to keep twist out of chain, aggressive cross-hatch tooth design, spring loaded for easy opening.
$128.73$188.62Mo-Clamp 0305 Dyna-Mo Jr Clamp
$128.73$188.62