-
Mo-Clamp 6400 Regular Deep Hook Set
MO-CLAMP 6400 REGULAR DEEP HOOK SET – For fast hook-ups on cowls, door posts and trunk openings, or to reach into cramped places. #210030 Small Bracket (2″ x 3″) and #210020 Large Bracket (2″ x 9″) included.
Overall Length: 19″ (482mm) Throat Depth: 6″ (152mm) Throat Opening: 14″ (356mm) Capacity: 5 tons (4,536kg) Replacement Parts: #210020 Large Bracket, #210030 Small Bracket, #520050 Pin Heat Treated Steel. Made in the U.S.A.
$427.87$641.73Mo-Clamp 6400 Regular Deep Hook Set
$427.87$641.73 -
Mo-Clamp 3110 Small Flat Nose Sheet Metal Hook, Swivel
MO-Clamp 3110 Small Flat Nose Sheet Metal Hook – Single individual small flat nose hook.
$87.05$118.43Mo-Clamp 3110 Small Flat Nose Sheet Metal Hook, Swivel
$87.05$118.43 -
-
Mo-Clamp 0804 Pull Plate for Tac-N-Pull 4″
MO-Clamp 0804 Pull Plate for Tac-N-Pull 4″
$12.77$16.22Mo-Clamp 0804 Pull Plate for Tac-N-Pull 4″
$12.77$16.22 -
Mo-Clamp 0305 Dyna-Mo Jr Clamp
MO-Clamp 0305 Dyna-Mo Jr Clamp – New generation of Mo-Clamps. Self-tightening. Thin-edged nose for getting into hard-to-reach places. Drop-forged round wedge to keep twist out of chain, aggressive cross-hatch tooth design, spring loaded for easy opening.
$128.73$188.62Mo-Clamp 0305 Dyna-Mo Jr Clamp
$128.73$188.62 -
Mo-Clamp 6381 Mo-Flex Sling 60″
MO-Clamp 6381 MO-Flex Sling 60″ – Mo-Flex slings are extremely flexible to conform more easily to the curve of surfaces being pulled. The protective pad slips around the sling to provide protection to the sling when wrapped around sharp objects.
Overall Length: 60″ Width: 2″ (51mm) Vertical Capacity: 5,300 lbs (2,403kg) Choke Capacity: 4,200 lbs (1,905kg) Basket Capacity: 10,600 lbs (4,807 kg) Made in the U.S.A.
$105.07$142.95Mo-Clamp 6381 Mo-Flex Sling 60″
$105.07$142.95 -
Mo-Clamp 6303 60″ Nylon Sling
MO-Clamp 6303 60″ Nylon Sling – Protects finish from mars.
Overall Length: 60″ (1,525mm) Width: 3″ (76mm) Vertical Capacity: 2.5 tons (2,267kg) Choke Capacity: 2 tons (1,814kg) Basket Capacity: 5 tons (4,536 kg) Replacement Parts: #62101 Clevis Pin, #62102 Rue Clip Made in the U.S.A.
$104.97$142.81Mo-Clamp 6303 60″ Nylon Sling
$104.97$142.81 -
Mo-Clamp 2450 Boltless Strut Tower Puller
MO-Clamp 2450 Boltless Strut Tower Puller – Easy, fast, reliable method for pulling strut towers. Developed for strut towers without bolts, to correct chassis dimensions to factory specifications. Strut tower removal is necessary.
Overall Length: 5″ (127 mm) Capacity: 3 tons (2,722 kg) Replacement Parts: #4051 Eye Nut, #100441 Numerous Angle Puller, #500053 Bolt Heat Treated Steel. Made in the U.S.A.
$268.42$402.58Mo-Clamp 2450 Boltless Strut Tower Puller
$268.42$402.58 -
Mo-Clamp 9450 4 Way Leg with Washer and Bolt for MO-2400
MO-Clamp 9450 4 Way Leg with Washer & Bolt
$121.70$178.32Mo-Clamp 9450 4 Way Leg with Washer and Bolt for MO-2400
$121.70$178.32 -
Mo-Clamp 850019 Thumb Screw for 7000/7001/7050 Trams
MO-Clamp 850019 Thumb Screw for 7000/7001/7050 (Parts Breakdown shown above: Thumb screw is #3-requires Qty of 8).
$1.37$1.45 -
Mo-Clamp 7055 Delrin Cone and Pointer
MO-Clamp 7055 Delrin Cone and Pointer – Made of tough Delrin Plastic. Designed to fit all Mo-Clamp trams including baby tram and #7000. Allows centering of holes for easier one-man tramming on underside of vehicles and engine compartments. Will make sure you are centered on those holes for precise measurements.
Size: 2″ cubed Made in USA
$143.10$209.67Mo-Clamp 7055 Delrin Cone and Pointer
$143.10$209.67 -
Mo-Clamp 850059 8″ Pointer for 7000/7001/7050
MO-Clamp 850059 8″ Pointer for 7000/7001/7050
$88.08$119.84Mo-Clamp 850059 8″ Pointer for 7000/7001/7050
$88.08$119.84
