-
Mo-Clamp 5622 T22 Tower Chain
MO-Clamp 5622 T22 Tower Chain – Many different shop uses. Use in correction of strut towers. For attachment to existing bolt holes. Designed for use with 3/8″ chain.
Overall Length: 19″ (483mm) Capacity: 2 tons (1,814kg) Heat Treated Steel. Made in the U.S.A.
$70.37$95.74Mo-Clamp 5622 T22 Tower Chain
$70.37$95.74 -
Mo-Clamp 5091 #9 Tool Board and Hooks
MO-Clamp 5091 #9 Tool Board and Hooks
Tool Board Only w/ Hooks
Tools Sold seprately$106.01$144.23Mo-Clamp 5091 #9 Tool Board and Hooks
$106.01$144.23 -
Mo-Clamp 4056 Narrow Draw Bar with Single Claw
MO-Clamp 4056 Narrow Draw Bar with Single Claw – Great for bolting to a frame, unibody rail or to other places to make a secure pull. Each bar has a combination of hole patterns to facilitate bolting to a vehicle. May be used in conjunction with various accessory items for specialized pulling needs.
Overall Length: 13″ (330 mm) Width: 2-1/2″ (58 mm) Capacity: 3 tons (2,722 kg) Replacement Parts: #5220 Clevis Pin & Rue Clip Heat Treated Steel. Made in the U.S.A.
$138.75$203.30Mo-Clamp 4056 Narrow Draw Bar with Single Claw
$138.75$203.30 -
Mo-Clamp 1320 Slim Line Sill Hook
MO-Clamp 1320 Slim Line Sill Hook – Use this new hook from Mo-Clamp to pull front hinge pillars, center pillars posts, rear hinge sections or any location where you need a broad, thin pulling surface. Made from Mo-Clamp Tru-Tuff drop-forged, heat-treated alloy steel with a pulling capacity of a full 4 tons. Heavy duty eye nut allows easy connection with Mo-Clamp chain and slip hooks.
Throat Depth: 4-3/4″ (107 mm) Overall Length: 11-1/2″ (248 mm) Capacity: 2.5 tons (2,268 kg) Heat Treated Steel. Made in the U.S.A.
$331.74$497.55Mo-Clamp 1320 Slim Line Sill Hook
$331.74$497.55 -
Mo-Clamp 5815 Down Pulley/Snap Block Assembly
MO-Clamp 5815 Down Pulley/Snap Block Assembly – combination of the #5810 Down Pulley Assembly and the #5811 Block Pulley Adapter it is perfect for horizontal pulls.
Capacity: 5 tons (4,536kg) Heat Treated Steel. Made in the U.S.A.
$378.11$567.10Mo-Clamp 5815 Down Pulley/Snap Block Assembly
$378.11$567.10 -
Mo-Clamp 0400 W Clamp
MO-Clamp 0400 W Clamp – Self-Tightening. The Super Clamp for the tough jobs. Ultra-wide gripping surface. Grabs 4-¼” of metal. Original wedge. Original straight cut tooth design.
$374.46$561.62Mo-Clamp 0400 W Clamp
$374.46$561.62 -
Mo-Clamp 9702 Small Round Wedge for Dyna-Mo
MO-Clamp 9702 Small Round Wedge for Dyna-Mo
$41.03$52.10Mo-Clamp 9702 Small Round Wedge for Dyna-Mo
$41.03$52.10 -
Mo-Clamp 5802 Jumbo G Clamp
MO-Clamp 5802 Jumbo G Clamp – Has a throat opening of 7″ to get over, around and behind the damage. Multiple holes allow for various angle pulls. Includes swivel pad. Optional (sold separately) #4059 5/8″ Screw Pin Shackle adds even more versatility.
Overall Length: 15-1/2″ (394mm) Overall Width: 9-1/2″ (241mm) Capacity: 5 tons (4,536kg) Replacement Parts: #580204 Main Shaft, #580209 Swivel Pad Heat Treated Steel. Made in the U.S.A.
$606.41$909.50Mo-Clamp 5802 Jumbo G Clamp
$606.41$909.50 -
-
Mo-Clamp 5800 G Clamp
MO-Clamp 5800 G Clamp – Easier pulling with multiple pulling angles. Has a throat opening of 4 inches allowing plenty of room to get over, around and behind the damage. And the movable shackle means more versatility. Made of heat-treated alloy steel for extra strength. Includes swivel pad.
Overall Length: 10-1/2″ (267mm) Overall Width: 6″ (152mm) Capacity: 4 tons (3,629kg) Replacement Parts: #4055 7/16″ Screw Pin Shackle, #520034 Main Shaft, #840065 Swivel Pad Heat Treated Steel. Made in the U.S.A.
$304.13$456.14Mo-Clamp 5800 G Clamp
$304.13$456.14 -
Mo-Clamp 4152 Two Single Claws
MO-Clamp 4152 Two Single Claws – Versatile combination for quick hook-ups and multiple pulls. 18-inches of 3/8″ chain included.
Overall Length: 25″ (635 mm) Working Load Limit: 6,600 lbs Working Load Limit: Refers to the maximum load (rated capability) in pounds that shall be applied in direct tension to a straight length of chain or attachment. NEVER EXCEED THE WORKING LOAD LIMIT of chains or attachments, even when the item is new and the load limit is uniformly applied. Replacement Parts: #5220 Clevis Pin & Rue Clip Heat Treated Steel. Made in the U.S.A.
$132.03$193.45Mo-Clamp 4152 Two Single Claws
$132.03$193.45 -
Mo-Clamp 5900 Mini Bite
MO-Clamp 5900 Mini Bite – The reversible Mini-Bite Clamp is designed to get around lips and corners for strong pulls and to pull narrow seams and lips. Cross-hatch tooth design assures a firm grip. Designed for use with a 3/8″ chain.
Overall Length: 6″ (152mm) Overall Width: 1-1/4″ (38mm) Gripping Surface: 1-1/4″ wide (45mm), 1″ deep (25mm) Capacity: 3 tons (2,722kg) Replacement Parts: #520046 Bolt, #5226 Nut, Bolt & Washer, #000120 Mini Pull Ring Heat Treated Steel. Made in the U.S.A.
$138.84$203.43Mo-Clamp 5900 Mini Bite
$138.84$203.43
