-
Mo-Clamp 0805 Pull Plate Kit for Tac-N-Pull
MO-Clamp 0805 Pull Plate Kit for Tac-N-Pull – For hard-to-hold pulls. Tack weld one of the reusable plates. Attach clamp and pull. Break tack weld with a grinding cut-off wheel or cutting torch.
- Ten (10) 1″ Pull Plates
- Five (5) 1-1/2″ Pull Plates
- Five (5) 3″ Pull Plates.
The Pull Plate Kit includes: Ten (10) #0801 1″ Pull Plates Five (5) #0802 1-1/2″ Pull Plates Five (5) of #0803 3″ Pull Plates. For use with the #0800 Tac-N-Pull Clamp. (Clamp not included in kit.) Heat Treated Steel. Made in the U.S.A.
$151.36$205.93Mo-Clamp 0805 Pull Plate Kit for Tac-N-Pull
$151.36$205.93 -
Mo-Clamp 6010 3/8″ X 10′ Chain with Grab Hook
Mo-Clamp 6010 3/8″ X 10′ Chain with Grab Hook
* Working Load Limit: 6,600 lbs (2,994kg)
* Proof Test: 20,000 lbs (9,070kg)
* Manufactured in accordance with the NACM Specification for chain,
* ASTM Standard A391 and ASTM Standard A413 for grade 70 carbon steel chain.
* Mo-Clamp chain is protectively plated with yellow dichromate$153.32$224.65Mo-Clamp 6010 3/8″ X 10′ Chain with Grab Hook
$153.32$224.65 -
Mo-Clamp 1850 Inline Slider
MO-Clamp 1850 Inline Slider – New generation of Mo-Clamps. Self-tightening. Made of heat-treated Tru-Tuff steel alloy. Grabs on to flanges and provides a sure grip while pulling “in-line”. Finger grips are cast into the tool to provide easy handling while positioning the clamp.
Gripping Surface: 3″ (76 mm) Overall Length: 7″ (178 mm) Capacity: 5 tons (4,536 kg) Replacement Parts: #185005 Jaw “A”, #185006 Jaw “B” Heat Treated Steel. Made in the U.S.A.
$155.59$227.97Mo-Clamp 1850 Inline Slider
$155.59$227.97 -
Mo-Clamp 5051 #5 Tool Board and Hooks
MO-Clamp 5051 #5 Tool Board and Hooks
$155.95$228.50Mo-Clamp 5051 #5 Tool Board and Hooks
$155.95$228.50 -
Mo-Clamp 0100 B Clamp
MO-Clamp 0100 B Clamp – Self-Tightening. The body man’s right arm. It grabs 2¼” (57 mm) of metal, making it ideal for hard pulls on heavy metal or frame. Original wedge. Original straight cut tooth design.
$157.12$230.21Mo-Clamp 0100 B Clamp
$157.12$230.21 -
Mo-Clamp 4024 Frame Rack Dyna-Mo Clamp
MO-Clamp 4024 Frame Rack Dyna-Mo Clamp – Make your own tool with this severe duty tooth designed clamp. Add side pull bracket when needed. Machine Tooth Design.
Gripping Surface: 3-1/2″ wide (95 mm) Capacity: 5 tons (4,536 kg) Replacement Parts: #5200 Nut, Bolt & Washer, #840076 Spring Heat Treated Steel. Made in the U.S.A.
$159.71$234.01Mo-Clamp 4024 Frame Rack Dyna-Mo Clamp
$159.71$234.01 -
Dentfix DF-EZ10 Parking Sensor and Lens Hole Maker
The Parking Sensor and Lens Hole Maker (Part No. DF-EZ10) from Dent Fix Equipment is the precise and clean way to create holes in order to install driver assist sensors on replacement bumpers.
Easy to use with a wide variety of sizes make this tool a must have for any shop.
$160.77$214.36Dentfix DF-EZ10 Parking Sensor and Lens Hole Maker
$160.77$214.36 -
Mo-Clamp 0405 Dyna-Mo Clamp W Clamp
MO-Clamp 0405 Dyna-Mo Clamp W Clamp – New generation of Mo-Clamps. Self-Tightening. Wider tooth surface to grab more thin metal without tearing. Drop-forged round wedge to keep twist out of chain and aggressive cross-hatch tooth design.
$160.99$235.88Mo-Clamp 0405 Dyna-Mo Clamp W Clamp
$160.99$235.88 -
Mo-Clamp 5710 Mo-Block Dolly for Frame Rail
MO-Clamp 5710 Mo-Block Dolly for Frame Rail – Straighten frame rails in about 80-percent of front-end damage cases. Inserted into the frame rail pocket, the dolly straightens the high strength, low-alloy metal easily and quickly. Dolly design keeps hands and fingers safely away from the impact area.
Overall Length: 11″ (280mm) Heat Treated Steel. Made in the U.S.A.
$163.01$238.84Mo-Clamp 5710 Mo-Block Dolly for Frame Rail
$163.01$238.84 -
Mo-Clamp 3081 T-top II
MO-Clamp 3081 T-Top II – Installs using only the installation tool (#3082) and a torque wrench. Provides a full 10 tons of pulling capacity using 3/8″ Chain. Lies flush with floor when not in use. 3-1/2″ (89mm) cored hole is required.
Capacity: 10 tons (9,072 kg) Replacement Parts: #308110 Casting Cap, #3082 Installation Tool Heat Treated Steel. Made in the U.S.A.
$165.15$224.70Mo-Clamp 3081 T-top II
$165.15$224.70 -
Mo-Clamp 0307 Dyna-Mo Corner Clamp
MO-Clamp 0307 Dyna-Mo Corner Clamp – With 3 tons of capacity, the Corner Clamp conforms to the exacting standards of all Mo-Clamp products. Made from Mo-Clamp Tru-Tuff heat-treated steel alloy, the 90-degree Corner Clamp uses a drop forged wedge for added strength. Eliminates the need to use two separate clamps and will be able to get into narrow and confined areas.
$166.08$243.34Mo-Clamp 0307 Dyna-Mo Corner Clamp
$166.08$243.34 -
