- “Zinko ZRM-030 30ton 0.50" Stroke Super Low Cylinder” already exists in your wishlist
-
Mo-Clamp 5350 Nut Bolt Spring Washer – 5/8″ X 3″ for Mo-Jr
MO-Clamp 5350 Nut Bolt Spring Washer – 5/8″ x 3″ for Mo-Jr
$14.15$17.97 -
Mo-Clamp 5400 Nuts and Bolts Jobber Pack
MO-Clamp 5400 Nuts and Bolts Jobber Pack – Most commonly used bolts, nuts, washers, and clevis pins. A diagram on the box helps you immediately locate the part you need. Mo-clamp bolts have special grades of material and are heat-treated to our specifications. Contains Grade 5 and Grade 8 bolts specific to individual Mo-Clamp tools.
$411.90$617.78Mo-Clamp 5400 Nuts and Bolts Jobber Pack
$411.90$617.78 -
Mo-Clamp 5616 Door Post Puller/Twister
Mo Clamp 5616 Door Post Puller/Twister
There are three positions from which to pull. For use on bolt-type hinge pillars.
Overall Length: 51/2″ (133mm)
Slots: 1/2 ” x 11/2″ (12mm x 39mm)
Weight: 2 lbs (.91kg)
Capacity: 2 tons (1,814kg)$119.25$174.73Mo-Clamp 5616 Door Post Puller/Twister
$119.25$174.73 -
Mo-Clamp 5622 T22 Tower Chain
MO-Clamp 5622 T22 Tower Chain – Many different shop uses. Use in correction of strut towers. For attachment to existing bolt holes. Designed for use with 3/8″ chain.
Overall Length: 19″ (483mm) Capacity: 2 tons (1,814kg) Heat Treated Steel. Made in the U.S.A.
$70.37$95.74Mo-Clamp 5622 T22 Tower Chain
$70.37$95.74 -
Mo-Clamp 5623 T23 Hinge Plate with 3/8″ Shackle
MO-Clamp 5623 T23 Hinge Plate with 3/8″ Shackle – Use in existing holes in frame structures or body panels. Comes with #5626 3/8″ Shackle for angle pulls.
Overall Length: 4″ (101mm) Capacity: 3 tons (2,722kg) Heat Treated Steel. Made in the U.S.A.
$114.04$155.15Mo-Clamp 5623 T23 Hinge Plate with 3/8″ Shackle
$114.04$155.15 -
Mo-Clamp 5626 T26 3/8″ Shackle
MO-Clamp 5626 T26 3/8″ Shackle
$28.01$35.57Mo-Clamp 5626 T26 3/8″ Shackle
$28.01$35.57 -
Mo-Clamp 5710 Mo-Block Dolly for Frame Rail
MO-Clamp 5710 Mo-Block Dolly for Frame Rail – Straighten frame rails in about 80-percent of front-end damage cases. Inserted into the frame rail pocket, the dolly straightens the high strength, low-alloy metal easily and quickly. Dolly design keeps hands and fingers safely away from the impact area.
Overall Length: 11″ (280mm) Heat Treated Steel. Made in the U.S.A.
$163.01$238.84Mo-Clamp 5710 Mo-Block Dolly for Frame Rail
$163.01$238.84 -
Mo-Clamp 5711 Mo-Wedge
MO-Clamp 5711 MO-Wedge – High impact polycarbonate plastic. Great for spreading damaged body panels. Used with Mo-Block Dolly for straightening out the rail pocket.
Overall Length: 5-1/2″ (140mm) Heat Treated Steel. Made in the U.S.A.
$8.76$11.13Mo-Clamp 5711 Mo-Wedge
$8.76$11.13 -
Mo-Clamp 5800 G Clamp
MO-Clamp 5800 G Clamp – Easier pulling with multiple pulling angles. Has a throat opening of 4 inches allowing plenty of room to get over, around and behind the damage. And the movable shackle means more versatility. Made of heat-treated alloy steel for extra strength. Includes swivel pad.
Overall Length: 10-1/2″ (267mm) Overall Width: 6″ (152mm) Capacity: 4 tons (3,629kg) Replacement Parts: #4055 7/16″ Screw Pin Shackle, #520034 Main Shaft, #840065 Swivel Pad Heat Treated Steel. Made in the U.S.A.
$304.13$456.14Mo-Clamp 5800 G Clamp
$304.13$456.14 -
Mo-Clamp 5802 Jumbo G Clamp
MO-Clamp 5802 Jumbo G Clamp – Has a throat opening of 7″ to get over, around and behind the damage. Multiple holes allow for various angle pulls. Includes swivel pad. Optional (sold separately) #4059 5/8″ Screw Pin Shackle adds even more versatility.
Overall Length: 15-1/2″ (394mm) Overall Width: 9-1/2″ (241mm) Capacity: 5 tons (4,536kg) Replacement Parts: #580204 Main Shaft, #580209 Swivel Pad Heat Treated Steel. Made in the U.S.A.
$606.41$909.50Mo-Clamp 5802 Jumbo G Clamp
$606.41$909.50 -
Mo-Clamp 580209 Swivel Pad
Mo-Clamp 580209 Swivel Pad for Jumbo G Clamp
$72.04$98.02Mo-Clamp 580209 Swivel Pad
$72.04$98.02 -
Mo-Clamp 5810 Down Pulley Assembly
MO-Clamp 5810 Down Pulley Assembly – For straight down or angled pulling. Works with pulling towers and bench systems. Large 5 inch wheel prevents undue chain wear. Secured with 1 inch heat-treated pin. When used with the #5811 Block Pulley Adapter it offers horizontal pulls.
Overall Length: 7-1/2″ (190mm) Capacity: 5 tons (4,536kg) Replacement Parts: #840067 Clevis Pin, #840068 Cotter Pin, #840086 Wheel Only Heat Treated Steel. Made in the U.S.A.
$328.17$492.20Mo-Clamp 5810 Down Pulley Assembly
$328.17$492.20
