-
6.7MM Boron Punch for Dent Fix 10T Self-Piercing Riveter
Product Details
Do you have a repair that requires punching a hole in Boron Steel (UHSS)? The 6.7MM Boron Punch Die Set and DF-SPR70 SPR Riveter (Available Separately) may be your solution.
Combined with the 10 Ton Riveter the 6.7MM Boron Punch is used during the repair process to create a hole for the application of Flow Form Rivets in Boron Steel.
Die is compatible with Dentfix DF-SPR70 SPR Riveter ONLY (Sold Separately)
$332.20$347.076.7MM Boron Punch for Dent Fix 10T Self-Piercing Riveter
$332.20$347.07 -
Mo-Clamp 0452 Flash Clamp 7ton
MO-Clamp 0452 Flash Clamp 7 Ton – Spring-loaded operation makes each clamp easy to use. Mo-Grip surface and pivoting head allows for a secure grip on most surfaces. Heat-treated investment cast jaws provide years of effective pulling power. Drop-forged wedge. Jaws can be easily replaced.
Capacity: 7 tons (6,350 kg) Length: 8″ (203 mm) Width: 3½” (89 mm) Replacement Parts: #045203 Pivot Jaw, #010706 Wedge, #520029 Pivot Pins, #520033 Retaining Bolt, #840076 Spring Heat Treated Steel. Made in the U.S.A.
$335.80$503.64Mo-Clamp 0452 Flash Clamp 7ton
$335.80$503.64 -
DentFix 900SP Locking Squeeze Puller for Alu-Spot
DentFix 900SP Locking Squeeze Puller for Alu-Spot
$336.01$448.01DentFix 900SP Locking Squeeze Puller for Alu-Spot
$336.01$448.01 -
Dentfix DF-109 Complete Slide Hammer for DF-1 Stud Welder
DentFix DF-109 Complete Slide Hammer for DF-1 Stud Welder
$337.19$449.59Dentfix DF-109 Complete Slide Hammer for DF-1 Stud Welder
$337.19$449.59 -
Mo-Clamp 7058 Pinch Weld Adapter Set of 4 Upgrade for Centerline Gauges
MO-Clamp 7058 Pinch Weld Adapter Set of 4 Upgrade for Centerline Gauges – Designed to fit all Mo-Clamp vertical scales on all centerline gauges in our product line. Allows hanging of centerline gauges on most pinch welds on underbody of today’s vehicles. Will make sure you are centered to create an opportunity for precise measurements. Made in USA
$355.02$532.47 -
Dentfix DF-DM555UDX Ultra Ding Massager
Dentfix DF-DM555UDX Ultra Ding Massager – Glue pullers are an excellent method for removing dings and small dents from OEM paint. When access to the back panel is not possible, a glue puller is the only means of PDR repair.
The Ultra Ding Massager DF-DM555UDX kit includes:
Squeeze Puller – allows for a massaging action that helps release the tension in the metal, allowing for a quicker more successful pull. The squeezed position holding capabilities allow for a constant pull.
T-Puller
Knock down tool with 2 heads (pointed and rounded)
Slide Hammer – for a more powerful pull on thicker metals, including steel and aluminum.
120V Glue Gun
Plastic Scraper Stick
12 Glue Sticks – specially formulated hot glue provides for strong adhesion yet easy removal using the release agent
24 Different Pulling Nibs – The new and redesigned pulling tabs provide the technician with more choices and nib surfaces for better fitment which improves grip when repairing the many varieties of dings and minor dents from small to large.
Blow Molded Case$373.43$497.91Dentfix DF-DM555UDX Ultra Ding Massager
$373.43$497.91 -
Mo-Clamp 0400 W Clamp
MO-Clamp 0400 W Clamp – Self-Tightening. The Super Clamp for the tough jobs. Ultra-wide gripping surface. Grabs 4-¼” of metal. Original wedge. Original straight cut tooth design.
$374.46$561.62Mo-Clamp 0400 W Clamp
$374.46$561.62 -
Mo-Clamp 0808 Maxi Tac-N-Pull
MO-Clamp 0808 Maxi Tac-N-Pull – A new tool that is the step up from our old standard, the #0800. This is the big brother for those pulls on creases and bends that demand a heavier pull. Or perhaps a pull that requires some twist to follow the sheet metal out the way it went in. This Tac-N-Pull has all of the finesse given to you by the first tool, #0805, PLUS, you have two more pulling points to add twist to your pull for that final tweak. Use with #1150 Chain Spreader Bar for multiple pulls in a heavily damaged area. These tools will help get more use out of your frame machine. Giving the technician options is what makes Mo-Clamp the best.
Design allows for uneven pulls and getting around obstructions Made of Mo-Clamp Tru-Tuff Steel Alloy Covered by the Mo-Clamp forever warranty Can use all 5 sizes of different pull plates in whatever combination necessary Comes with 2 – 4″ pull plates (0804) and 2 – 6″ pull plates (0806) Height: 9″ Capacity: 3 Tons
$374.55$561.75Mo-Clamp 0808 Maxi Tac-N-Pull
$374.55$561.75 -
Mo-Clamp 5815 Down Pulley/Snap Block Assembly
MO-Clamp 5815 Down Pulley/Snap Block Assembly – combination of the #5810 Down Pulley Assembly and the #5811 Block Pulley Adapter it is perfect for horizontal pulls.
Capacity: 5 tons (4,536kg) Heat Treated Steel. Made in the U.S.A.
$378.11$567.10Mo-Clamp 5815 Down Pulley/Snap Block Assembly
$378.11$567.10 -
Zinko ZAP-40 40 Cubic inch Air Pump
Zinko ZAP-40 40 Cubic Inch Air Pump- Single speed pump, operating at up to 10,000 psi. Operate on ship air to drive a variety of single acting rams, presses and hydraulic pullers.
Operates in any position for ease of use and flexibility. Convenient 360 degree swivel design for better hose control. Exclusive, “air-thrust” design rapidly takes up slack, putting the cylinder rod or tool in work position in seconds. Two models: ZAP-40 for tools and smaller cylinders; ZAP-62 for cylinders as large as 55-Ton capacity. Heavy duty anodized aluminum housing is extremely durable. Portable to any job site equipped with compressed air. Takes the place of manual pumps. Less operator fatigue, more productivity. Compact, light-weight design for easy handling and storage. All-metal air motor for reliability and easy maintenance. Internal relief valve protects system components.
Country of Origin: Taiwan$389.28$444.89Zinko ZAP-40 40 Cubic inch Air Pump
$389.28$444.89 -
Dentfix 800BR Hot Stapler – Plastic Repair Assistant
DentFix 800BR Hot Stapler
Plastic Repair Assistant repair bumpers and Headlights and many other types of plastic
Repair has just taken a major step forward. The DF-800BR Hot Stapler from Dent Fix Equipment
Creates a strong, structural repair while still maintaining flexibility
Allows for proper fitting of components and bumpers.
The Hot Stapler uses heat to embed a staple into the plastic to stitch tears in plastic back together.
Repairs Broken fittings on headlights , torn tabs, or any other plastic component
Kit includes 7 Types Staples different Shapes of staples
Additional Staples Available in boxes of 50 ( 7 different types)
Repair headlight Tabs in minutes and most other types of plastic.
Comes with blow molded carrying case.
5 Year Warranty. Made in the USA.
FREE SHIPPING$390.45$520.60Dentfix 800BR Hot Stapler – Plastic Repair Assistant
$390.45$520.60 -
Zinko ZR-152 15ton 2″ Stroke Ram
Zinko ZR-152 15 Ton 2″ Stroke Ram – These industrial quality, general purpose cylinders are designed for use in a variety of applications where lifting, pushing, bending, or holding may be required. Ideal for use in shop, agricultural, automotive/truck service and construction maintenance.
Country of Origin: Taiwan
Min Ht. 5.88″
$392.84$448.95Zinko ZR-152 15ton 2″ Stroke Ram
$392.84$448.95
