-
Mo-Clamp 4022 Frame Rack Dyna-Mo #2
MO-Clamp 4022 Frame Rack Dyna-Mo #2 – Two pair Frame Rack Dyna-Mo jaws with 12″ draw bar, one side pull bracket, shackle and oval loop. Raised “ears” to hold bolt in place while tightening. Machine tooth design.
Gripping Surface: 9-1/4″ wide (235 mm) Overall Length: 12-1/2″ (318 mm) Capacity: 5 tons (4,536 kg) Replacement Parts: #4043 Oval Loop, #4055 7/16″ Shackle, #5200 Nut, Bolt & Washer, #200203 Side Pull Bracket Heat Treated Steel. Made in the U.S.A.
$450.47$675.62Mo-Clamp 4022 Frame Rack Dyna-Mo #2
$450.47$675.62 -
Mo-Clamp 5851 Hybridtong Clamp
MO-Clamp 5851 Hybrid Tong Clamp – Pivoting jaws on all tong clamps assure a secure grip across the entire gripping surface on pulls up to 5 tons. Made of Tru-Tuff heat-treated steel alloy.
Overall Length: 12″ (305mm) Capacity: 5 tons (4,536kg) Throat Depth: 5″ (127mm) Max Opening: 6″ (152mm) Throat Closed: 3″ (76mm) Heat Treated Steel. Made in the U.S.A.
$454.94$682.33Mo-Clamp 5851 Hybridtong Clamp
$454.94$682.33 -
Mo-Clamp 5852 Large Tong Clamp
MO-Clamp 5852 Large Tong Clamp – Pivoting jaws on all tong clamps assure a secure grip across the entire gripping surface on pulls up to 5 tons. Made of Tru-Tuff heat-treated steel alloy.
Overall Length: 10.5″ (267mm) Capacity: 5 tons (4,536kg) Throat Depth: 5″ (127mm) Max Opening: 6.5″ (165mm) Throat Closed: 4.25″ (108mm) Heat Treated Steel. Made in the U.S.A.
$457.10$685.57Mo-Clamp 5852 Large Tong Clamp
$457.10$685.57 -
Mo-Clamp 2100 2Ma Multi-Adapter Plate
MO-Clamp 2100 2MA Multi-Adapter Plate – Designed for most foreign and domestic vehicles with Mac-Pherson suspension, the 2MA fits approximately 95% of the various strut bolt patterns. The 2MA Plate also offers unlimited body and frame pulls with a variety of compatible accessories. Can be used on damage to door posts, frame horns, brackets, cowls, or rear axles. Use a #1450 Numerous Angle Puller (NAP) or #1500 Pull Ring for fast hook-ups and a variation of pulls. Includes three 4-way legs. Large-base legs give good support for pulling, with four hole sizes to accommodate most vehicles.
Overall Length: 9″ (229 mm) Capacity: 5 tons (4,536 kg) Replacement Parts: #5230 Bolt & Washer, #9450 Leg, Bolt & Washer Heat Treated Steel. Made in the U.S.A.
$459.03$688.46Mo-Clamp 2100 2Ma Multi-Adapter Plate
$459.03$688.46 -
Mo-Clamp 5850 Smalltong Clamp
MO-Clamp 5850 Small Tong Clamp – Pivoting jaws on all tong clamps assure a secure grip across the entire gripping surface on pulls up to 5 tons. Made of Tru-Tuff heat-treated steel alloy.
Overall Length: 12″ (305mm) Capacity: 5 tons (4,536kg) Throat Depth: 5″ (127mm) Max Opening: 5.25″ (133mm) Throat Closed: 2″ (51mm) Heat Treated Steel. Made in the U.S.A.
$468.73$703.00Mo-Clamp 5850 Smalltong Clamp
$468.73$703.00 -
Mo-Clamp 4016 Frame Rack Angle Bracket Only
MO-Clamp 4016 Frame Rack Angle Bracket Only – Will hold down cars with horizontal pinch welds including Honda 1990 and up. Angles can be drilled to fit frame racks, benches, etc. Includes two #4044 1/2 ” Shackles.
Does Not Include Jaws.
$486.80$730.11Mo-Clamp 4016 Frame Rack Angle Bracket Only
$486.80$730.11 -
SPR Die Set – TESLA 9pc for Dent Fix 10T Self-Piercing Riveter
9 Piece TESLA Die Set, part no. DF-SPR/TESLA9. Rivet Dies for application of 5mm Self-Piercing Rivets.
Includes:
Eight (8) Forming Die heads for 5mm SPRs (H1 – H8)
One (1) SPR Rivet Holder (B1)
Case Included
Fits the DF-SPR70 10T Self-Piercing Riveter ONLY (Sold Separately).$489.90$504.40 -
Mo-Clamp 4010 Frame Rack Uni-Body Clamp
MO-Clamp 4010 Frame Rack Uni-Body Clamp – Bar holes designed for three ways of pulling, using #4044 1/2 ” Shackle and #4043 Oval Loop. Clamp has recessed pockets to hold bolts stationary for easy tightening.
Gripping Surface: 8″ wide (203mm), 3/4″ deep (19mm) Overall Length: 14″(368mm) Capacity: 5 tons(4536kg) Replacement Parts: #4043 Oval Loop, #4044 3/4″ shackle, #4045 Nut, Bolt & Washer, #4046 Spring Heat Treated Steel. Made in the U.S.A.
$517.23$775.75Mo-Clamp 4010 Frame Rack Uni-Body Clamp
$517.23$775.75 -
Dentfix DF-900BP Bridge Puller for Alu-Spot
DentFix DF-900BP Bridge Puller for Alu-Spot
$531.66$708.88Dentfix DF-900BP Bridge Puller for Alu-Spot
$531.66$708.88 -
Mo-Clamp 2400 3MA Multi-Adapter Plate
MO-Clamp 2400 3MA Multi-Adapter Plate – Designed for a wide variety of strut towers. Permits fast hook-ups and pulling in any direction. Allows center strut tower measurements with tram gauge instruments. Gives additional versatility for pulling over and around obstructions such as fenders. Also use in conjunction with #1450 Numerous Angle Puller (NAP) to give it even more versatility. Includes three 4-way legs. Large-base legs give good support for pulling, with four hole sizes to accommodate most vehicles.
Overall Length: 9″ (229 mm) Capacity: 5 tons (4,536 kg) Replacement Parts: #5230 Bolt & Washer, #9450 Leg, Bolt, & Washer Heat Treated Steel. Made in the U.S.A.
$543.44$815.06Mo-Clamp 2400 3MA Multi-Adapter Plate
$543.44$815.06 -
Dentfix DF-505BP Bridge Puller
The DF-505BP Bridge Puller is a great way for techs to perform controlled panel pulls. The Pull Control Wheel allows the tech to add incremental levels of force and lock the pull in that position.
This bridge puller is able to perform steel or aluminum pulls*
Steel:
When using the DF-505 Maxi System you can pull with wiggle wire or weld keys attached to the panel. For the weld keys you will also need the DF-505KEM Magnetic Key Electrode. Simply weld keys (DF-503KF & DF-503KT) in desired location, connect rod through eyelets in the keys, and attached to the Bridge Puller.Aluminum:
When using an aluminum welder weld M4x12 studs to the panel an attach screw on eyelets to the studs. Install pull rod and bridge puller.*Please note: Working with tools for both steel and aluminum repairs can contaminate the panels affect paint performance, it is best practice not to use on back to back pulls (steel then aluminum, or vice versa) and if you do, thoroughly clean before transferring to another repair. Even better use the tool on one dedicated metal aluminum or steel not both.
$543.56$724.75Dentfix DF-505BP Bridge Puller
$543.56$724.75 -
Mo-Clamp 6411 Jumbo Deep Hook Arm Only
MO-Clamp 6411 Jumbo Deep Hook Only
$555.14$832.60Mo-Clamp 6411 Jumbo Deep Hook Arm Only
$555.14$832.60
