-
Mo-Clamp 0670 Baby Box Clamp
MO-Clamp 0670 Baby Box Clamp – Self-tightening. Great for single-lip flanges and inside frame horns. Original wedge; cross- hatch tooth design; spring-loaded for easy opening. Throat clearance of 1½” high (38 mm), 1¼” deep (32 mm).
Gripping Surface: 1¾” wide (45 mm), 1″ deep (25 mm) Overall Length: 9½” (241 mm) Capacity: 5 tons (4,536 kg) Replacement Parts: #9701 Wedge, #5252 Nut, Bolt, Spring & Washer Heat Treated Steel. Made in the U.S.A.
$222.73$326.35Mo-Clamp 0670 Baby Box Clamp
$222.73$326.35 -
Mo-Clamp 4030 3-Way Pull Clamp
MO-Clamp 4030 3-Way Pull Clamp – Clamp has recessed pockets to hold bolts stationary for easy tightening. Includes #4043 Oval Loop.
Gripping Surface: 4″ wide (102 mm), 1/2 ” deep (19 mm) Overall Length: 8″ (203 mm) Capacity: 6 tons (5,443 kg) Replacement Parts: #4045 Nut, Bolt & Washer, #4046 Spring Heat Treated Steel. Made in the U.S.A.
$237.35$347.76Mo-Clamp 4030 3-Way Pull Clamp
$237.35$347.76 -
Mo-Clamp 1000 Handy Hook
MO-Clamp 1000 Handy Hook – A great time saver with Mo-Clamp’s easy hook-up system. No chain is too long and no hooks are needed on the chain. Alloy heat-treated steel. Pulling slots can be used with #0900 Hole Pull Adapters. Designed for use with 3/8″ chain.
Overall Length: 6″ (165 mm) Capacity: 5 tons (4,536 kg) Heat Treated Steel. Made in the U.S.A.
$89.03$113.05Mo-Clamp 1000 Handy Hook
$89.03$113.05 -
Mo-Clamp 4025 Frame Rack Jaws
MO-Clamp 4025 Frame Rack Jaws – Clamp has recessed pockets to hold bolts stationary for easy tightening.
Gripping Surface: 4″ wide (102 mm), 1/2 ” deep (19 mm) Overall Length: 5″ (127 mm) Capacity: 6 tons (5,443 kg) Replacement Parts: #4045 Nut, Bolt & Washer, #4046 Spring Heat Treated Steel. Made in the U.S.A.
$216.05$316.55Mo-Clamp 4025 Frame Rack Jaws
$216.05$316.55 -
Mo-Clamp 5252 Nut Bolt Spring Washer 5/8″ X 4-1/2″ for 0670
MO-Clamp 5252 Nut Bolt Spring Washer 5/8″ x 4-1/2″ for 0670
$21.13$26.83 -
Mo-Clamp 5900 Mini Bite
MO-Clamp 5900 Mini Bite – The reversible Mini-Bite Clamp is designed to get around lips and corners for strong pulls and to pull narrow seams and lips. Cross-hatch tooth design assures a firm grip. Designed for use with a 3/8″ chain.
Overall Length: 6″ (152mm) Overall Width: 1-1/4″ (38mm) Gripping Surface: 1-1/4″ wide (45mm), 1″ deep (25mm) Capacity: 3 tons (2,722kg) Replacement Parts: #520046 Bolt, #5226 Nut, Bolt & Washer, #000120 Mini Pull Ring Heat Treated Steel. Made in the U.S.A.
$138.84$203.43Mo-Clamp 5900 Mini Bite
$138.84$203.43 -
Mo-Clamp 4049 Frame Wrench
MO-Clamp 4049 Frame Wrench – Allows easy access to the bends and waves resulting from frame straightening. Helps in achieving the “pre-accident condition” look. Eliminates unsightly hammer marks of the frame. Designed for c-frame construction. Two different angles to access the difficult underside of vehicles.
Overall Length: 15″ (381 mm) Capacity: 5 tons (4,536 kg) Heat Treated Steel. Made in the U.S.A.
$95.81$130.36Mo-Clamp 4049 Frame Wrench
$95.81$130.36 -
Mo-Clamp 4042 Female Clamp Jaw with Nut, Bolt, Spring, and Washer for MO-4025
MO-Clamp 4042 Female Clamp Jaw with Nut, Bolt, Spring, and Washer for MO-4025
$102.11$138.93 -
Mo-Clamp 1450 Numerous Angle Puller
MO-Clamp 1450 Numerous Angle Puller – The NAP allows pulls from any angle. Just put the bolt through a 1/2″ hole and pull. Use with #2100 or #2400 Multi-Adapter Plates, or with back-up plates. Designed for use with 3/8″ chain.
Overall Length: 6″ (152 mm) Capacity: 4 tons (3,629 kg) Replacement Parts: #5245 Nut, Bolt, & Washer Heat Treated Steel. Made in the U.S.A.
$74.81$101.78Mo-Clamp 1450 Numerous Angle Puller
$74.81$101.78 -
Mo-Clamp 6260 3/8″ Alloy Clevis Slip Hook
MO-Clamp 6260 3/8″ Alloy Clevis Slip Hook
Working Load Limit: 5,500 lbs Capacity: 7 tons (6,350kg)
Replacement Parts: #62101 Clevis Pin, #62102 Rue Clip
Heat Treated Steel. Made in the U.S.A.
$35.38$44.93Mo-Clamp 6260 3/8″ Alloy Clevis Slip Hook
$35.38$44.93 -
Mo-Clamp 5820 Pinch Weld Brackets – Set of 4
MO-Clamp 5820 Pinch Weld Brackets – Weld-on pinch weld brackets. 12″ brackets for welding to bottom of automobiles without pinch welds. Works with most pinch weld holding systems. Allows for hook-up to a frame rack or hold-down system.
Overall Length: 12″ (305mm) Capacity: 2 tons (1,814kg) Heat Treated Steel. Made in the U.S.A.
$108.08$158.36Mo-Clamp 5820 Pinch Weld Brackets – Set of 4
$108.08$158.36 -
Mo-Clamp 210060 Replacement Horizontal Bracket
MO-Clamp 210060 Replacement Horizontal Bracket
$87.14$118.56Mo-Clamp 210060 Replacement Horizontal Bracket
$87.14$118.56
