-
Body Buggy Chassis Roller – 4′
Body Buggy Chassis Roller – 4′ – Quick and safe method to transport disabled vehicles on and off a rack and around the shop or into a paint booth. MADE IN THE USA!
After a simple five minute installation, the unit becomes “part of the vehicle”, negating the need to employ any unstable or dangerous lift points. The included spacer kit allows for the use of original fasteners, alleviating the need for any additional fastener inventory. When installed, the vehicle is easily rolled onto a frame rack, into a paint booth or to storage, out of the way of production. The device can be installed on the front or rear of most any vehicle using the cradle or sub-frame mounting points and hardware. The Body Buggy has a max weight rating of 4,500 lbs and includes a 5 year warranty.
INCLUDED: Main Beam (4 Foot), Wheel Assemblies, Sliding Lock Collars, Mounting Brackets (2 Pairs of different heights), Hitch Pins & Clips, Fitment Pin Spacer, Storage Crate, and 10 pc Spacer Kit.
Free up Rack Space with the patented Body Buggy DF-BB104
$1,407.69$1,599.65Body Buggy Chassis Roller – 4′
$1,407.69$1,599.65 -
Dentfix DF-595II Hammer Head Removal System
Dent Fix DF-595II Hammer Head Dent Removal System –
Replace your stud welder with the 110 volt DF-595ii HammerHead. Same great quality, same essential accessories that provides the technician with the means to higher productivity and better results. It’s like having sticky fingers and being able to pull dent with your hand.
110 Volt
1 year warranty.
60Lbs
Formerly Know as Shark 2 Dent remover (Name changed by Manufacturer)
Included Items:
Weld pin Tip (1), Washer Tip (1), Shrink Tip (1), Wiggle Wire Tip (1), Short Pull Rod (1), Slide Hammer With Rod and Weight (1), Leverage Rod (1), Ground Magnet (1), # Finger Claw, & 1Pound of Wiggle WireMade in China. 1 year warranty. Use with a 30 amp breaker.
$1,396.34$1,586.75Dentfix DF-595II Hammer Head Removal System
$1,396.34$1,586.75 -
Mo-Clamp 4018 Mercedes Anchoring Adapters
MO-Clamp 4018 Mercedes Anchoring Adapters – For holding vehicles with Mercedes-type jack tube holes. Jack pin adapters provided for early and late models (two different sizes).
Overall Length: 14″ (356 mm) Capacity: 6 tons (5,443 kg) Replacement Parts: #5249 Nut, Bolt & Washer, #401805 Small Pin, #401804 Large Pin Heat Treated Steel. Made in the U.S.A.
$1,351.92$2,027.63Mo-Clamp 4018 Mercedes Anchoring Adapters
$1,351.92$2,027.63 -
Zinko ZR-504A 50ton 4.25″ Stroke Aluminum Single Acting Cylinder
Zinko Aluminum Cylinder is easily carried around and connected to work with any 10,000 psi air over hydraulic pump. These lightweight and rugged cylinders are suitable for almost every heavy lifting situation, in the shop or on the job site.
Special Features:
All models come with 3/8″ NPT fast-flow quick-connection couplers and dust caps.
Made of the strongest aluminum alloys and heat-treated to provide a maximum combination of strength and fracture resistance.
Grooved saddles for stability.
Steel base-plated for increased durability.
Optional valve to control cylinder speed can also be used as shut off valve for temporary load holding.
Optional aluminum base provides extra support and stability for the 50 ton cylinders.More Information
Capacity (Tons) :50
Stroke (in) :4.25
Oil Capacity (in³) :43
Minimum Height (in) :9.29
Maximum Heights (in) :13.22
Outside Diameter (in) :5.11
Cylinder Bore Diameter (in) :3.74
Plunger Diameter (in) :3.15
Base to Adv. Port (in) :1.18
Saddle Diameter (in) :1.96
Weight (lbs) :29.000000$1,271.37$1,452.99Zinko ZR-504A 50ton 4.25″ Stroke Aluminum Single Acting Cylinder
$1,271.37$1,452.99 -
Zinko ZRH-206 20ton 6″ Stroke Hollow Ram
Zinko ZRH-206 20 Ton 6″ Stroke Hollow Ram- Design for use in a variety of applications where lifting, pushing, bending or holding may be required.
High-strength alloy steel construction. Chrome-plated piston rods resist wear and corrosion. Special bearing design helps prevent galling for long life and trouble-free performance. Polyurethane seals and wipers to reduce contamination, extending cylinder life. Hardened saddles keep top bearing and plunger from jamming. Saddle grooves help prevent slipping. Heavy-duty spring enables consistent fast plunger retraction. All models come with fast-flow quick-connection coupler and dust cap. May be used in any position. Hollow plunger design allows for both pull and push forces.
Country of Origin: TaiwanMin Ht. 12.05″
$1,263.29$1,443.75Zinko ZRH-206 20ton 6″ Stroke Hollow Ram
$1,263.29$1,443.75 -
Mo-Clamp 5090 #9 Tool Board with Hooks
MO-Clamp 5090 #9 Tool Board – Keep your tools organized and in good condition with handy tool boards.
The package includes: #5091 Tool Board with Hooks #0045 Angle Bite Clamp #0054 Mini Spring Clamp #0205 Dyna-Mo C Clamp #0305 Dyna-Mo Jr Clamp #0405 Dyna-Mo W Clamp #2450 Boltless Strut Tower Puller #4058 MAC II Multi-Angle Clamp #5616 Door Post Puller/Twister #5091 Toolboard Dimensions: 2’x2′ Tools are Heat Treated Steel and Made in the U.S.A.
$1,256.12$1,883.95Mo-Clamp 5090 #9 Tool Board with Hooks
$1,256.12$1,883.95 -
Static Gun – DF-EZAP – By Dent Fix
Dent Fix DF-EZAP StaticZap – anti-static device that keeps the surface clean during the paint process to avoid unnecessary reworking and buffing, saving both time and money.
Static attracts dust and unwanted particles, making it very difficult to keep surfaces clean and causing blemishes in the paints finish and other work surfaces. Its absolutely essential to eliminate static from the environmentat every stage of paintingin order to avoid costly reworking.
The StaticZap incorporates the efficiency and power of an air amplifier with the proven technology of corona ionization to produce a highly effective anti-static blow-off gun. Perform the anti-static blow off before starting and at every stage in the painting process to eliminate fisheyes and produce a finish that looks like glass.
The two-minute anti-static process will eliminate the need for wet sanding and buffing which saves time on prep work and also cuts down on labor and materials.
The Kit includes a lightweight, durable gun, rechargeable lithium ion battery, two emitter pins, and safety keys.
$1,196.25$1,595.00Static Gun – DF-EZAP – By Dent Fix
$1,196.25$1,595.00 -
DentFix CureRIGHT UV Curing Gun
The CureRIGHT DF-CR004 rechargeable UV Curing Gun utilizes the latest ultra high flux UV-A LED technology and is focused through custom designed optics to provide a more efficient, faster, and safer cure light. Use for all automotive repair and industrial curing needs utilizing ultraviolet light curable fillers, base coats, primers, top coats, and clear coatings. Up to 1 second curing time for some UV primers. Powerful irradiance with maximum UV-A intensity of 55,000 μW/cm² at 8 inches (20cm). Successfully tested on UV paint products from all major paint manufacturers. Only emits UV-A, and does not emit UV-B or UV-C. Efficient active built-in cooling system keeps the light cooler to maintain optimum light output during extended use. Efficient ultrasonic range finder function. Wall-Mounted charging station provides more convenient recharging process.
APPLICATION
Use for all automotive repair and industrial curing needs utilizing ultraviolet light curable fillers, base coats, primers, top coats, and clear coatings.FEATURE & BENEFITS
• FAST CURING TIMES – Up to 1 second curing time for some UV primers.
• POWERFUL IRRADIANCE – maximum UV-A intensity of 55,000 μW/cm² at 8 inches (20cm).
• ACTIVE COOLING SYSTEM- Keeps the light cooler to maintain optimum light output during extended use.
• ULTRA RANGE FINDER – Efficient ultrasonic range finder and timer functions.
• LCD CONTROL CENTER – Easily set curing times and irradiance.SPECIFICATIONS:
Light Source: High Power UV LED
LED Light Wattage: 66 Watts
LED Lifetime: 40,000 Hours
LED Wavelength: λp= 395 ±5 nm
Battery Type: Li-ion 11.1V – 5200mAh, 57.72Wh
Battery Charging Time: 3 Hours
Battery Charging Info: AC 100 – 240V ~ 15V 1.5A
Running Time: 90 Minutes in Total (Max 10 minutes each use)
Weight: 2 Lbs (0.9 Kg)
Dimensions: 6-1/4”x 8-3/4“x 3” (159 x 223 x 77mm)
Housing Material: Aluminum + Polyamide
Cooling System: Thermal Management System enhanced with fan
Storage Temperature: -4°F ~ 122°F (-20° C ~ +50° C)TECHNICAL SPECIFICATIONS:
Ultrasonic Range Finder: Max 160” (400cm)
Temperature Control Function: Working ≤ 194° F (90° C)
Safety Protection Function: Double click ≤ 100ms
Curing Distance: 2” (50mm) to 8” (200mm)
Curing Zone Dimensions: 4” x 4” (100mm x 100mm) to 8” x 8” (200mm x 200mm )
Curing Time: 5~12 seconds* to 30~80 seconds*
Average Irradiance: 135 mW/cm2 to 36 mW/cm2
Peak Irradiance: 200 mW/cm2 to 55 mW/cm2$1,163.93$1,473.33DentFix CureRIGHT UV Curing Gun
$1,163.93$1,473.33 -
Mo-Clamp 7000 Universal Tram Gauge with Storage Case
MO-Clamp 7000 Universal Tram Gauge with Storage Case – Tram Instruments are a versatile and indispensable tool for determining collision damage to uni-body cars and for checking critical measurements during repair. Use the tram to check dimensions between control points on suspension and mechanical components. The Tram Instrument makes it easy to establish dimensions around components and to check contours by comparing measurements from one side of the vehicle to the other. Measures from 2-1/2″ (65mm) to 11′ (3.3m). Level bubble installed in sliding head for accuracy in measurement. Includes hard plastic storage case. Made in the U.S.A.
$1,160.83$1,741.03Mo-Clamp 7000 Universal Tram Gauge with Storage Case
$1,160.83$1,741.03 -
Mo-Clamp 7001 Universal Tram Gauge with Cardboard Box
MO-Clamp 7001 Universal Tram Gauge with Cardboard Box – Tram Instruments are a versatile and indispensable tool for determining collision damage to uni-body cars and for checking critical measurements during repair. Use the tram to check dimensions between control points on suspension and mechanical components. The Tram Instrument makes it easy to establish dimensions around components and to check contours by comparing measurements from one side of the vehicle to the other. Measures from 2-1/2″ (65mm) to 11′ (3.3m). Level bubble installed in sliding head for accuracy in measurement. Made in the U.S.A.
$1,144.19$1,716.07Mo-Clamp 7001 Universal Tram Gauge with Cardboard Box
$1,144.19$1,716.07 -
Zinko ZRB-1002 100ton 2.25″ Stroke Single Acting Cylinder
Zinko ZRB-1002 100 Ton 2.25″ Stroke Single Acting Cylinder- Multiple application for many different fields that require single-acting cylinders.
Lightweight, low profile design for use in confined spaces. Baked enamel finish for increased corrosion resistance. Plunger wiper reduces contamination, extending cylinder life. 3/8″ fast flow coupler and dust cap included on all models. Grooved plunger end with threaded holes for mounting tilt saddles. Integral handle on ZRB-100 for easy carrying. Plated steel plunger. Single acting spring return.
Country of Origin: Taiwan
Min Ht. 5.56″$1,138.60$1,301.26Zinko ZRB-1002 100ton 2.25″ Stroke Single Acting Cylinder
$1,138.60$1,301.26 -
Zinko ZR-502A 50ton 2.25″ Stroke Aluminum Single Acting Cylinder
Zinko ZR-502A 50 Ton 2.25″ Stroke Aluminum Single Acting Cylinder- Industrial quality, general purpose cylinder designed for use in various applications where lifting, pushing, bending, or holding may be required. Ideal for use in shop, agricultural, automotive/truck service, and construction maintenance.
High-strength alloy steel construction Chrome-plated piston rods resist wear and corrosion. Special bearing design helps prevent galling for long life and trouble-free performance Polyurethane seals and wipers reduce contamination. Equipped standard with grooved saddles. Steel base-plated for increased durability. Baked enamel finish for outstanding corrosion protection Heavy-duty spring enables consistent fast plunger retraction. Collar plunger threads and base mounting holes provided for easy fixturing.Country of Origin: TAIWAN
Min Ht. 6.93″
$1,131.76$1,293.44Zinko ZR-502A 50ton 2.25″ Stroke Aluminum Single Acting Cylinder
$1,131.76$1,293.44
