-
Zinko ZRH-306 30ton 6.13″ Stroke Hollow Ram
Overview
These General Purpose Hollow type Cylinders of our store are designed for use in a variety of applications where lifting, pushing, bending or holding may be required.Ideal for use in shop, agricultural, automotive/truck service, and construction maintenance.
Special Features:
High-strength alloy steel construction.
Chrome-plated piston rods resist wear and corrosion.
Special bearing design helps prevent galling for long life and trouble-free performance.
Polyurethane seals and wipers to reduce contamination, extending cylinder life.
Hardened saddles keep top bearing and plunger from jamming.
Saddle grooves help prevent slipping.
Heavy-duty spring enables consistent fast plunger retraction.
All models come with fast-flow quick-connection coupler and dust cap.
May be used in any position.
Hollow plunger design allows for both pull and push forces.
More Information
Capacity (Tons) :30
Stroke (in) :6.10
Oil Capacity (in³) :44.06
Cylinder Effective Area (in²) :7.22
Minimum Height (in) :13.00
Maximum Heights (in) :19.10
Outside Diameter (in) :4.50
Weight (lbs) ;45.000000$1,503.88$1,718.71Zinko ZRH-306 30ton 6.13″ Stroke Hollow Ram
$1,503.88$1,718.71 -
Mo-Clamp 4028 BMW Hold Down
MO-Clamp 4028 BMW Hold Down – For holding BMW vehicles with oblong or round jack tube holes.
Overall Length: 14″ (356 mm) Capacity: 6 tons (5,443 kg) Replacement Parts: #5249 Nut, Bolt & Washer, #402801 Rocker Pin Heat Treated Steel. Made in the U.S.A.
$1,515.76$2,273.36Mo-Clamp 4028 BMW Hold Down
$1,515.76$2,273.36 -
Mo-Clamp 4015 Frame Rack Jaws with Angle Bracket
MO-Clamp 4015 Frame Rack Jaws with Angle Bracket – Will hold down cars with horizontal pinch welds including Honda 1990 and up. Angles can be drilled to fit frame racks, benches, etc. Includes two #4044 1/2 ” Shackles.
Gripping Surface: 13″ wide (330mm) Overall Length: 6″ (406mm) Capacity: 6 tons (5,443kg) Replacement Parts: #5200 Nut, Bolt and washer, 840076 spring #4016 Frame rail angle bracket (1 only) Heat Treated Steel. Made in the U.S.A.
$1,672.60$2,508.58Mo-Clamp 4015 Frame Rack Jaws with Angle Bracket
$1,672.60$2,508.58 -
Vac-N-Pull Vacuum Pulling Post
Vacuum pull post comes with a easy hook up for the Electro power built into the rachet pulling device (Electro Power sold Separately)
$1,800.00$1,975.00Vac-N-Pull Vacuum Pulling Post
$1,800.00$1,975.00 -
Dentfix DF-SPR/BRAD Blind Rivet Adapter
Dent Fix Equipments SPR Riveters can install blind rivets with the addition of the Blind Rivet Adapter (DF-SPR/BRAD).
The Blind Rivet Adapter is compatible with the SPR Riveter (DF-SPR67) and Push Pull Riveter (DF-SPR69).
A flexible neck allows for the tool to be positioned into hard to reach areas.
The adapter allows the setting of blind rivets with diameters from 4.0 to 7.8 mm for aluminum and 4.0 to 6.4 mm for steel. It has a tensile force is 20 kN.
Both Riveters Sold Separately
$1,891.39$2,149.31Dentfix DF-SPR/BRAD Blind Rivet Adapter
$1,891.39$2,149.31 -
Mo-Clamp 7200 Deluxe Centerline Gauge
MO-Clamp 7200 Deluxe Centerline Gauge (w/o Board)
- Measures automatic centerline for all vehicles
- For use with foreign and domestic
- Exceptional reliability and accuracy
- Recessed tapes for efficient reading and durability
- Made of rugged, light-weight cast aluminum
- Measures in metric units.
- Instruction manual included
- Compatible with all data books.
- Includes (4) #710161 8″ (203mm) Vertical Scales
- Includes (2) #710163 16″ (406mm) Vertical Scales
- Includes (2) #710164 24″ (610mm) Vertical Scale
Note: Some Vehicles may require optional Vertical Scales (That are not included with this kit)
- Optional #710162 12″ (305mm) Vertical Scale – Sold Separately
- Optional #710165 30″ (762mm) Vertical Scale- Sold Separately
Replacement Parts: #710161 8″ (203mm) Vertical Scale, #710163 16″ (406mm) Vertical Scale, #710164 24″ (610mm) Vertical Scale, #710129 Board Only, #710131 Hook Set Only Heat Treated Steel. Made in the U.S.A.
$1,955.52$2,932.91Mo-Clamp 7200 Deluxe Centerline Gauge
$1,955.52$2,932.91 -
The MAXI EX – 110V
Product Description
MAXI-MIZE your steel panel repairs with the special MAXI EX configuration!APPLICATION:
Efficiently repairs light to moderate collision damage on automotive steel panels for a cleaner, better repair.FEATURE & BENEFITS:
LEGENDARY – #1 Steel Dent Repair Station preferred by technicians around the world.
EXTENDED HANDLE – Organizes the cables out of the way for safe, nimble movement of the unit.
PADDED SEAT – Extra storage and brings the technician to eye level with the repair area.
ACCESSORY TRAYS – Holds the consumables and tools poised & ready for rapid deployment.
DESCRIPTION:
One of the Most Common Steel Panel Repair Areas is the Dog-Leg or Door Repair. The MAXI EX configuration brings the technician eye level with the damage. The ergonomic position saves the tech from bending over or kneeling and prevents unnecessary daily stress on their body.Just WELD • PULL • TWIST! The Dent Fix Equipment MAXI DF-505EX110 is a 110 volt single phase steel dent pulling station that provides the technician with the power they need to shrink, pull rocker panels, hail damage, creases, dents in hard to access areas and all types of metal damage.
The efficiency of this tool increases the workers productivity while producing a cleaner, better repair. Taking the idea of a stud welder one step further, this versatile tool will:
1. Weld pins & keys
2. Weld a slide hammer directly to the panel
3. Weld a light pulling rod
4. Weld wiggle wire for even crease pulling
5. Weld a rod for leverage pulling
6. Shrink metalINCLUDES: EX Edition includes the MAXI 110V (DF-505/110V: Leverage Puller, Rods, Claws, Electrodes, and Consumables), 2 Accessories Shelves (DF-505AT), Padded Seat (DF-505MS), and an Extended Handle (DF-505PHXT, replaces standard handle that comes with the unit)!
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
The Dent Fix website and databases are all intended to be used as a GUIDE ONLY – it is important to remember that the auto body professional performing the repair is in a position to thoroughly inspect, diagnose and identify the methodology and their unique cost of the vehicle damage repair.
$2,206.23$2,395.00The MAXI EX – 110V
$2,206.23$2,395.00 -
The MAXI EX – 110V Dent Fix
DESCRIPTION:
One of the Most Common Steel Panel Repair Areas is the Dog-Leg or Door Repair. The MAXI EX configuration brings the technician eye level with the damage. The ergonomic position saves the tech from bending over or kneeling and prevents unnecessary daily stress on their body.Just WELD • PULL • TWIST! The Dent Fix Equipment MAXI DF-505EX110 is a 110 volt single phase steel dent pulling station that provides the technician with the power they need to shrink, pull rocker panels, hail damage, creases, dents in hard to access areas and all types of metal damage.
The efficiency of this tool increases the workers productivity while producing a cleaner, better repair. Taking the idea of a stud welder one step further, this versatile tool will:
1. Weld pins & keys
2. Weld a slide hammer directly to the panel
3. Weld a light pulling rod
4. Weld wiggle wire for even crease pulling
5. Weld a rod for leverage pulling
6. Shrink metalINCLUDES: EX Edition includes the MAXI 110V (DF-505/110V: Leverage Puller, Rods, Claws, Electrodes, and Consumables), 2 Accessories Shelves (DF-505AT), Padded Seat (DF-505MS), and an Extended Handle (DF-505PHXT, replaces standard handle that comes with t
$2,395.00The MAXI EX – 110V Dent Fix
$2,395.00 -
DentFix DF-EZN1 EZ Nitrogen Plastic Welder – Bottle
DentFix DF-EZN1 EZ Nitrogen Plastic Welder – The DF-EZN1 EZ NITRO PLASTIC WELDER is unique in its use of proprietary Flow Adjust Switch Technology (FAST). The FAST system makes the DF-EZN1 the easiest nitrogen welder to learn and use. It simplifies nitrogen welding and eliminates flow adjustments by the user. This significantly reduces the time to set up the welder and gets the work done FAST.
Equipped with two welders, the DF-EZN1 EZ NITRO incorporates both a nitrogen welding torch and an airless welding torch. The nitrogen torch is air cooled. It is essential to establish and maintain air flow before turning the welder on, and air flow must be maintained until the nitrogen torch cools down. (Usually 10 minutes to cool down after powering down)
The unit comes with plastic rod in various types and sizes to enable the user to weld different types of plastic and different types of damages. Also included is a roll of aluminum tape to hold parts together when welding. The hand seaming tool help shapes, flatten, and insure that repaired flanges and tabs are the correct thickness.
The cart is equipped with a tank regulator, tank brackets, tank chain, a heat gun holster, and a power strip for powering other tools.
$2,979.32$3,385.59DentFix DF-EZN1 EZ Nitrogen Plastic Welder – Bottle
$2,979.32$3,385.59 -
Zinko ZRDH-606 60ton 6″ Stroke Double Acting Hollow Plunger Cylinder
Zinko ZRDH-606 60 Ton 6″ Stroke Double Acting Hollow Plunger Cylinder- Design for use in a variety of applications where lifing, pushing, bending or holding may be required.
Double acting design for greater speed and positive control. Interfaces with automated operations. 3/8″ fast flow couplers included on all models. Threaded collar along with hollow plunger design allows for both pull and push forces. Baked enamel finish for increased corrosion control. Removable hardened saddles protect plunger during lifting and pressing. Built in safety valve prevents accidental over-pressurization. Plunger wiper seals reduce contamination, extending cylinder life.Country of Origin: Taiwan
$3,169.69$3,622.50Zinko ZRDH-606 60ton 6″ Stroke Double Acting Hollow Plunger Cylinder
$3,169.69$3,622.50 -
Lift King bed lift – Main Component Only Lift King
Product Description
Lift King Light Duty Plus Bed Lifting and bed dolly system
The Lift King Light Duty bed lift and storage MAIN UNIT ONLY, bed removal system comes with everything needed for one technician of any size to remove or install OEM pickup boxes of all sizes, including up to 8’ dually boxes. Lift King Main Component quickly converts from the stored position to the working position without needing any tools. Bed box can be removed in as little as five minutes including the original set up time. After removal, the box can easily be moved around the shop and stored as needed. This will also remove beds w/o removing rear bumper. Safely store this in a 3′ X 3′ area
- Main Unit only (This is for shop who already has a complete system)
- 1 Technician required to remove bed
- Improves productivity (multiple technicans not required)
- Works with little or limited cab to bed clearance
- Lift bed to desired height when repairs are required
- Increases productivity when performing fuel pump replacements
- Mitigates and limits risk of damages
- Lowers risk of employee fatigue, strain and injury
- safest and most efficient way to remove or install a pickup box
- Compact design allows storage in a 3′ X 3′ area
- Ships LTL (large truck)
$4,000.00 -
Mo-Clamp 5078 #10 Tool Board
MO-Clamp 5078 #10 Tool Board with Tools Including:
#0200 C Clamp
#0205 Dyna-Mo C Clamp
#0300 JR Clamp
#0305 Dyna-Mo Jr Clamp
#0405 Dyna-Mo W Clamp
#0550 T.O. Clamp
#0660 Long Nose Clamp
#0670 Baby Box Clamp
#0680 Big Mouth Clamp
#1250 Panel Puller
#1300 Sill Hook
#1800 Track Hook (2 Each)
#2400 Adapter Plate
#3110 Small Flat Nose Sheet Metal Hook
#3130 Large Flat Nose Sheet Metal Hook
#4130 Hole Plug (2 Each)
#4145 Double Grab Hook (2 Each)
#5616 Door Post Puller/Twister
#5800 G Clamp
#6311 “T” Hook Tie-Downs (2 Each)
#6302 Slide-Through Sling
#6350 Cable Sling
#6400 Deep Hook Set
#5079 Tool Board with Hooks
105lbs$4,181.03$5,750.09Mo-Clamp 5078 #10 Tool Board
$4,181.03$5,750.09
