-
Mo-Clamp 0050 A Clamp
MO-Clamp The A Clamp 0050 grips narrow seams and ridges. Hardened steel cross-hatch teeth assure a secure pull. Excellent for use with slide hammer. Clamp has raised “bolt stoppers” to hold bolts stationary, for easy, one-handed tightening. Use only with ¼” chain.
$123.51$180.97Mo-Clamp 0050 A Clamp
$123.51$180.97 -
Mo-Clamp 4041 Male Clamp Jaw with Nut, Bolt, Spring, and Washer for MO-4025
MO-Clamp 4041 Male Clamp Jaw with Nut, Bolt, Spring, and Washer for MO-4025
$102.11$138.93 -
Mo-Clamp 4018 Mercedes Anchoring Adapters
MO-Clamp 4018 Mercedes Anchoring Adapters – For holding vehicles with Mercedes-type jack tube holes. Jack pin adapters provided for early and late models (two different sizes).
Overall Length: 14″ (356 mm) Capacity: 6 tons (5,443 kg) Replacement Parts: #5249 Nut, Bolt & Washer, #401805 Small Pin, #401804 Large Pin Heat Treated Steel. Made in the U.S.A.
$1,351.92$2,027.63Mo-Clamp 4018 Mercedes Anchoring Adapters
$1,351.92$2,027.63 -
Mo-Clamp 6220 3/8″ Super Alloy Clevis Grab Hook
MO-Clamp 6220 3/8″ Super Alloy Clevis Grab Hook
$77.59$105.57Mo-Clamp 6220 3/8″ Super Alloy Clevis Grab Hook
$77.59$105.57 -
Mo-Clamp 5035 Small Blank Tool Board
MO-Clamp 5035 Small Blank Tool Board – Keep your tools organized! Design your own tool board and order hooks from Mo-Clamp. 24″x24″. Does NOT include hooks!
$68.80$93.60Mo-Clamp 5035 Small Blank Tool Board
$68.80$93.60 -
Mo-Clamp 4120 Double Claw Hook
MO-Clamp 4120 Double Claw Hook – Use as an accessory with draw bars or chain. Use a pair with Triangle or Oval Loop as a chain sorter, double hook, or bumper hook. Designed for use with 3/8″ chain.
Overall Length: 5″ (127 mm) Capacity: 6 tons (5,443 kg) Heat Treated Steel. Made in the U.S.A.
$75.01$102.05Mo-Clamp 4120 Double Claw Hook
$75.01$102.05 -
Mo-Clamp 1800 Track Hook
MO-Clamp 1800 Track Hook – Quick tie-down for track systems or back anchoring on frame racks. Lip can be used for pulling damaged areas; varied multiple uses for chain lengthening or shortening. Slot can be used for chain hook-up. Designed for use with 3/8″ chain.
Gripping Surface: 3″ wide (76 mm) Overall Length: 6″ (165 mm) Capacity: 6 tons (5,443 kg) Heat Treated Steel. Made in the U.S.A.
$110.08$149.77Mo-Clamp 1800 Track Hook
$110.08$149.77 -
Mo-Clamp 6410 Jumbo Deep Hook Set
MO-Clamp 6410 Jumbo Deep Hook Set – For fast hook-ups on cowls, door posts and trunk openings, or to reach into cramped places. #210030 Small Bracket (2″ x 3″) and #210020 Large Bracket (2″ x 9″) included.
Overall Length: 21″ (533mm) Throat Depth: 10″ (254mm) Throat Opening: 15″ (381mm) Capacity: 4 tons (3,629kg) Replacement Parts: #6411 Jumbo Deep Hook Arm Only, #210020 Large Bracket, #210030 Small Bracket, #520050 Pin Heat Treated Steel. Made in the U.S.A.
$727.03$1,090.41Mo-Clamp 6410 Jumbo Deep Hook Set
$727.03$1,090.41 -
Mo-Clamp 7000 Universal Tram Gauge with Storage Case
MO-Clamp 7000 Universal Tram Gauge with Storage Case – Tram Instruments are a versatile and indispensable tool for determining collision damage to uni-body cars and for checking critical measurements during repair. Use the tram to check dimensions between control points on suspension and mechanical components. The Tram Instrument makes it easy to establish dimensions around components and to check contours by comparing measurements from one side of the vehicle to the other. Measures from 2-1/2″ (65mm) to 11′ (3.3m). Level bubble installed in sliding head for accuracy in measurement. Includes hard plastic storage case. Made in the U.S.A.
$1,160.83$1,741.03Mo-Clamp 7000 Universal Tram Gauge with Storage Case
$1,160.83$1,741.03 -
Mo-Clamp 7300 Strut Tower Alignment Gauge
MO-Clamp 7300 Strut Tower Alignment Gauge – Measures strut tower height at both forward and aft locations. Determines centerline and locates lower control arm centerline position. Use in conjunction with the #7200 Deluxe Centerline Gauge. Measurements are in metric units. Includes 4″ (102mm) Reverse Cone Pointer, 8″ (203mm) Reverse Cone Pointer, 4″ (102mm) Tower Pointer, and 8″ (203mm) Tower Pointer.
Replacement Parts: #710106 4″ (102mm) Reverse Cone Pointer, #710107 8″ (203mm) Reverse Cone Pointer, #710109 4″ (102mm) Tower Pointer, #710108 8″ (203mm) Tower Pointer Made in the U.S.A.
$1,090.10$1,634.94Mo-Clamp 7300 Strut Tower Alignment Gauge
$1,090.10$1,634.94 -
Mo-Clamp 2100 2Ma Multi-Adapter Plate
MO-Clamp 2100 2MA Multi-Adapter Plate – Designed for most foreign and domestic vehicles with Mac-Pherson suspension, the 2MA fits approximately 95% of the various strut bolt patterns. The 2MA Plate also offers unlimited body and frame pulls with a variety of compatible accessories. Can be used on damage to door posts, frame horns, brackets, cowls, or rear axles. Use a #1450 Numerous Angle Puller (NAP) or #1500 Pull Ring for fast hook-ups and a variation of pulls. Includes three 4-way legs. Large-base legs give good support for pulling, with four hole sizes to accommodate most vehicles.
Overall Length: 9″ (229 mm) Capacity: 5 tons (4,536 kg) Replacement Parts: #5230 Bolt & Washer, #9450 Leg, Bolt & Washer Heat Treated Steel. Made in the U.S.A.
$459.03$688.46Mo-Clamp 2100 2Ma Multi-Adapter Plate
$459.03$688.46 -
Mo-Clamp 0551 Original Tight Opening Clamp
MO-Clamp 0551 Original Tight Opening Clamp – Mo-Clamp’s re-introduced the Tight Opening Clamp due to popular demands for the old design. Still a full 3 ton capacity. Still able to reach core support and upper sheet metal areas where no other can. Perfect for small pick-up frame rails.
Gripping Surface: 1½” wide (38 mm), ½” deep (13 mm) Overall Length: 6½” (165 mm) Capacity: 3 tons (2,722 kg) Heat Treated Steel. Made in the U.S.A.
$292.50$438.70Mo-Clamp 0551 Original Tight Opening Clamp
$292.50$438.70
