-
Zinko ZR-1510 15ton 10″ Stroke Ram
Zinko ZR-1510 15 Ton 10″ Stroke Ram- These industrial quality, general purpose cylinders are designed for use in a variety of applications where lifting, pushing, bending, or holding may be required. Ideal for use in shop, agricultural, automotive/truck service and construction maintenance.
Country of Origin: TaiwanMin Ht. 13.89″
$615.83$703.81Zinko ZR-1510 15ton 10″ Stroke Ram
$615.83$703.81 -
Mo-Clamp 5802 Jumbo G Clamp
MO-Clamp 5802 Jumbo G Clamp – Has a throat opening of 7″ to get over, around and behind the damage. Multiple holes allow for various angle pulls. Includes swivel pad. Optional (sold separately) #4059 5/8″ Screw Pin Shackle adds even more versatility.
Overall Length: 15-1/2″ (394mm) Overall Width: 9-1/2″ (241mm) Capacity: 5 tons (4,536kg) Replacement Parts: #580204 Main Shaft, #580209 Swivel Pad Heat Treated Steel. Made in the U.S.A.
$606.41$909.50Mo-Clamp 5802 Jumbo G Clamp
$606.41$909.50 -
Zinko ZR-254 25ton 4″ Stroke Ram
Overview
The 25 ton 4″ stroke hydraulic cylinders of our store are designed for use in a variety of applications where lifting, pushing, bending or holding may be required. Ideal for use in shop, agricultural, automotive/truck service, and construction maintenance.
Special Features:
Designed with base mounting holes (4/16-18 UNC) for easy mounting on almost any fixture.
Can be used in any positions.
Harden saddles keep top bearing and plunger from jamming while the saddle grooves help prevent slipping.
Baked enamel finish for outstanding corrosion prevention.
Threaded collar and internal threads withstand full loads for maximum flexibility in fixturing.
Come with a 3/8″ NPT fast flow quick connection coupler and dust cap.
Collar Plunger thread and base mounting hole provide for easy fixture.
Optional adapters make it easy and cost efficient to convert our cylinders from snap-type to threaded-type for your application.
With appropriated accessories, These Industrial Quality Cylinders can be paired with either hand pumps, air pumps, or electric pumps.More Information
Capacity (Tons) :25
Stroke (in) :4.00
Oil Capacity (in³) :20.68
Cylinder Effective Area (in²) :5.15
Minimum Height (in) :8.46
Maximum Heights (in) :12.46
Outside Diameter (in) :3.34
Weight (lbs) :20.000000Min Ht. 8.5″
$603.93$690.20Zinko ZR-254 25ton 4″ Stroke Ram
$603.93$690.20 -
Zinko ZRB-201 20ton 1.75″ Stroke Single Acting Cylinder
Zinko ZRB-201 20 Ton 1.75″ Stroke Single Acting Cylinder- Multiple application for many different fields that require single-acting cylinders.
Lightweight, low profile design for use in confined spaces. Baked enamel finish for increased corrosion resistance. Plunger qiper reduces contamination, extending cylinder life. 3/8″ fast flow coupler and dust cap included on all models. Grooved plunger end with threaded holes for mounting tilt saddles. Plated steel plungers. Single-acting spring return.
Country of Origin: TaiwanMin Ht. 3.88″
$573.95$655.94Zinko ZRB-201 20ton 1.75″ Stroke Single Acting Cylinder
$573.95$655.94 -
Mo-Clamp 6411 Jumbo Deep Hook Arm Only
MO-Clamp 6411 Jumbo Deep Hook Only
$555.14$832.60Mo-Clamp 6411 Jumbo Deep Hook Arm Only
$555.14$832.60 -
Dentfix DF-505BP Bridge Puller
The DF-505BP Bridge Puller is a great way for techs to perform controlled panel pulls. The Pull Control Wheel allows the tech to add incremental levels of force and lock the pull in that position.
This bridge puller is able to perform steel or aluminum pulls*
Steel:
When using the DF-505 Maxi System you can pull with wiggle wire or weld keys attached to the panel. For the weld keys you will also need the DF-505KEM Magnetic Key Electrode. Simply weld keys (DF-503KF & DF-503KT) in desired location, connect rod through eyelets in the keys, and attached to the Bridge Puller.Aluminum:
When using an aluminum welder weld M4x12 studs to the panel an attach screw on eyelets to the studs. Install pull rod and bridge puller.*Please note: Working with tools for both steel and aluminum repairs can contaminate the panels affect paint performance, it is best practice not to use on back to back pulls (steel then aluminum, or vice versa) and if you do, thoroughly clean before transferring to another repair. Even better use the tool on one dedicated metal aluminum or steel not both.
$543.56$724.75Dentfix DF-505BP Bridge Puller
$543.56$724.75 -
Mo-Clamp 2400 3MA Multi-Adapter Plate
MO-Clamp 2400 3MA Multi-Adapter Plate – Designed for a wide variety of strut towers. Permits fast hook-ups and pulling in any direction. Allows center strut tower measurements with tram gauge instruments. Gives additional versatility for pulling over and around obstructions such as fenders. Also use in conjunction with #1450 Numerous Angle Puller (NAP) to give it even more versatility. Includes three 4-way legs. Large-base legs give good support for pulling, with four hole sizes to accommodate most vehicles.
Overall Length: 9″ (229 mm) Capacity: 5 tons (4,536 kg) Replacement Parts: #5230 Bolt & Washer, #9450 Leg, Bolt, & Washer Heat Treated Steel. Made in the U.S.A.
$543.44$815.06Mo-Clamp 2400 3MA Multi-Adapter Plate
$543.44$815.06 -
Dentfix DF-900BP Bridge Puller for Alu-Spot
DentFix DF-900BP Bridge Puller for Alu-Spot
$531.66$708.88Dentfix DF-900BP Bridge Puller for Alu-Spot
$531.66$708.88 -
Mo-Clamp 4010 Frame Rack Uni-Body Clamp
MO-Clamp 4010 Frame Rack Uni-Body Clamp – Bar holes designed for three ways of pulling, using #4044 1/2 ” Shackle and #4043 Oval Loop. Clamp has recessed pockets to hold bolts stationary for easy tightening.
Gripping Surface: 8″ wide (203mm), 3/4″ deep (19mm) Overall Length: 14″(368mm) Capacity: 5 tons(4536kg) Replacement Parts: #4043 Oval Loop, #4044 3/4″ shackle, #4045 Nut, Bolt & Washer, #4046 Spring Heat Treated Steel. Made in the U.S.A.
$517.23$775.75Mo-Clamp 4010 Frame Rack Uni-Body Clamp
$517.23$775.75 -
SPR Die Set – TESLA 9pc for Dent Fix 10T Self-Piercing Riveter
9 Piece TESLA Die Set, part no. DF-SPR/TESLA9. Rivet Dies for application of 5mm Self-Piercing Rivets.
Includes:
Eight (8) Forming Die heads for 5mm SPRs (H1 – H8)
One (1) SPR Rivet Holder (B1)
Case Included
Fits the DF-SPR70 10T Self-Piercing Riveter ONLY (Sold Separately).$489.90$504.40 -
Mo-Clamp 4016 Frame Rack Angle Bracket Only
MO-Clamp 4016 Frame Rack Angle Bracket Only – Will hold down cars with horizontal pinch welds including Honda 1990 and up. Angles can be drilled to fit frame racks, benches, etc. Includes two #4044 1/2 ” Shackles.
Does Not Include Jaws.
$486.80$730.11Mo-Clamp 4016 Frame Rack Angle Bracket Only
$486.80$730.11 -
Mo-Clamp 5850 Smalltong Clamp
MO-Clamp 5850 Small Tong Clamp – Pivoting jaws on all tong clamps assure a secure grip across the entire gripping surface on pulls up to 5 tons. Made of Tru-Tuff heat-treated steel alloy.
Overall Length: 12″ (305mm) Capacity: 5 tons (4,536kg) Throat Depth: 5″ (127mm) Max Opening: 5.25″ (133mm) Throat Closed: 2″ (51mm) Heat Treated Steel. Made in the U.S.A.
$468.73$703.00Mo-Clamp 5850 Smalltong Clamp
$468.73$703.00
