-
Mo-Clamp 0551 Original Tight Opening Clamp
MO-Clamp 0551 Original Tight Opening Clamp – Mo-Clamp’s re-introduced the Tight Opening Clamp due to popular demands for the old design. Still a full 3 ton capacity. Still able to reach core support and upper sheet metal areas where no other can. Perfect for small pick-up frame rails.
Gripping Surface: 1½” wide (38 mm), ½” deep (13 mm) Overall Length: 6½” (165 mm) Capacity: 3 tons (2,722 kg) Heat Treated Steel. Made in the U.S.A.
$292.50$438.70Mo-Clamp 0551 Original Tight Opening Clamp
$292.50$438.70 -
Mo-Clamp 4215 Reverse Pull Clamp
Mo-Clamp 4215 Reverse Pull Clamp – This tool is a must have for frame jobs. Wrecks cause sway on frame rails, and the resulting bend needs help straightening. This clamp puts pressure at the weak spot and the bend, and with this tool’s 30% bend it allows for easier hook up. To get the best angle for the pull, the head can swivel a bit because of the design of the holes. Heavy-duty, solid, no slippage, long past due! Brought to us from a 30-year technician.
A bend of 30 degrees makes all the difference when hooking up this tough guy onto a frame rail and making corrections.
Combined with swivel holes under the jaws the right angle for the job at hand is assured.
Fortified with our Forever Warranty for toughness this tool is the right one for the job at hand.
Replacement Parts: #421501 Plate, #5200 Nut, Bolt & Washer, 840076 SpringHeat Treated Steel. Made in the USA.
Length: 10.5″ (267mm)
$174.61$255.84Mo-Clamp 4215 Reverse Pull Clamp
$174.61$255.84 -
Mo-Clamp 5230 Replacement Parts: Bolt and Washer
MO-Clamp 5230 Replacement Parts: Bolt & Washer
$7.37$9.36 -
Mo-Clamp 6313 Ford “T” Hook with 3/8″ Grab Hook
MO-Clamp 6313 Ford “T” Hook with 3/8″ Grab Hook – Original shipping tie down for Ford vehicles. Excellent around the frame machine to help hold a frame while diamond is being pulled.
Overall Length 6″ (228mm) Capacity 4 tons (3,629kg)
$88.01$111.76Mo-Clamp 6313 Ford “T” Hook with 3/8″ Grab Hook
$88.01$111.76 -
Mo-Clamp 5810 Down Pulley Assembly
MO-Clamp 5810 Down Pulley Assembly – For straight down or angled pulling. Works with pulling towers and bench systems. Large 5 inch wheel prevents undue chain wear. Secured with 1 inch heat-treated pin. When used with the #5811 Block Pulley Adapter it offers horizontal pulls.
Overall Length: 7-1/2″ (190mm) Capacity: 5 tons (4,536kg) Replacement Parts: #840067 Clevis Pin, #840068 Cotter Pin, #840086 Wheel Only Heat Treated Steel. Made in the U.S.A.
$328.17$492.20Mo-Clamp 5810 Down Pulley Assembly
$328.17$492.20 -
Mo-Clamp 1150 Chain Spreader Bar
MO-Clamp 1150 Chain Spreader Bar – The Chain Spread Bar enables the body man to make pulls around box rails or other obstacles, while maintaining the distance between pulling clamps.
Overall Length: 11″ (280 mm) Capacity: 5 tons (4,536 kg) Heat Treated Steel. Made in the U.S.A.
$116.96$159.13Mo-Clamp 1150 Chain Spreader Bar
$116.96$159.13 -
Mo-Clamp 1700 Chain Locking Fork
MO-Clamp 1700 Chain Locking Fork – Handy stopper for chain. Used to maintain chain tension while adjusting for pulls. Locks chain tight. Heat-treated alloy steel. Designed for use with 3/8″ chain.
Overall Length: 6″ (165 mm) Capacity: 6 tons (5,443 kg) Heat Treated Steel. Made in the U.S.A.
$103.69$131.67Mo-Clamp 1700 Chain Locking Fork
$103.69$131.67 -
Mo-Clamp 4058 Mac II Multi-Angle Clamp
MO-Clamp 4058 MAC II Multi-Angle Clamp – New style features cross-hatch tooth pattern which holds well with less distortion of metal. Larger pull plate is adjustable and reversible for more multi-angle pulls. Clamp has “bolt stoppers” to hold bolts stationary for easy tightening.
Gripping Surface: 3-1/2″ wide (95 mm), ⅝” deep (16 mm) Overall Length: 9″ (229 mm) Capacity: 4 tons (3,629 kg) Replacement Parts: #5325 Nut, Bolt & Washer, #200131 Side Pull Bracket, #200128 Pull Plate Heat Treated Steel. Made in the U.S.A.
$246.73$370.05Mo-Clamp 4058 Mac II Multi-Angle Clamp
$246.73$370.05 -
Mo-Clamp 4020 4-Way Pull Clamp
MO-Clamp 4020 4-Way Pull Clamp – Clamp has recessed pockets to hold bolts stationary for easy tightening. Includes #4043 Oval Loop.
Gripping Surface: 4″ wide (102 mm), 3/4 ” deep (19 mm) Overall Length: 8″ (203 mm) Capacity: 6 tons (5,443 kg) Replacement Parts: #4046 Spring, #5355 Nut, Bolt & Washer Heat Treated Steel. Made in the U.S.A.
$319.27$478.84Mo-Clamp 4020 4-Way Pull Clamp
$319.27$478.84 -
Mo-Clamp 4048 Many Hole Wide Draw Bar
MO-Clamp 4048 Many Hole Wide Draw Bar – Great for bolting to a frame, unibody rail or to other places to make a secure pull. Each bar has a combination of hole patterns to facilitate bolting to a vehicle. May be used in conjunction with various accessory items for specialized pulling needs.
Overall Length: 14-1/2″ (368 mm) Width: 4″ (102 mm) Capacity: 3 tons (2,722 kg) Heat Treated Steel. Made in the U.S.A.
$123.47$167.99Mo-Clamp 4048 Many Hole Wide Draw Bar
$123.47$167.99 -
Mo-Clamp 4045 Bolt, Nut, Washer 5/8″ X 3-1/2″
MO-Clamp 4045 Bolt, Nut, Washer 5/8″ x 3-1/2″
$11.92$15.14Mo-Clamp 4045 Bolt, Nut, Washer 5/8″ X 3-1/2″
$11.92$15.14 -
Mo-Clamp 4010 Frame Rack Uni-Body Clamp
MO-Clamp 4010 Frame Rack Uni-Body Clamp – Bar holes designed for three ways of pulling, using #4044 1/2 ” Shackle and #4043 Oval Loop. Clamp has recessed pockets to hold bolts stationary for easy tightening.
Gripping Surface: 8″ wide (203mm), 3/4″ deep (19mm) Overall Length: 14″(368mm) Capacity: 5 tons(4536kg) Replacement Parts: #4043 Oval Loop, #4044 3/4″ shackle, #4045 Nut, Bolt & Washer, #4046 Spring Heat Treated Steel. Made in the U.S.A.
$517.23$775.75Mo-Clamp 4010 Frame Rack Uni-Body Clamp
$517.23$775.75
