-
Mo-Clamp 003 Pull Plate for Tac-N-Pull 3″
MO-Clamp 0803 Pull Plate for Tac-N-Pull 3″
$12.77$16.22Mo-Clamp 003 Pull Plate for Tac-N-Pull 3″
$12.77$16.22 -
Mo-Clamp 7400 Mo-Pro Gauge Package
MO-Clamp 7400 Mo-Pro Gauge Package Also referred to as ” Tool Package C” 9020023 – This package includes #7001 Universal Tram Gauge, #7200 Deluxe Centerline Gauge, #7300 Strut Tower Alignment Gauge, display board and hooks. Be sure to use your uni-body and chassis dimension and specification charts.
Replacement Parts: #710120 Board Only, #710126 Hook Set Only Made in the U.S.A.
$4,914.34$7,585.62Mo-Clamp 7400 Mo-Pro Gauge Package
$4,914.34$7,585.62 -
Mo-Clamp 6250 3/8″ Super Alloy Clevis Slip Hook
MO-Clamp 6250 3/8″ Super Alloy Clevis Slip Hook
Working Load Limit: 7,100 lbs Capacity 10 tons
Replacement Parts: #62501 Retaining Pin, #62502 Spring Pin
Heat Treated Steel. Made in the U.S.A.
$100.42$136.63Mo-Clamp 6250 3/8″ Super Alloy Clevis Slip Hook
$100.42$136.63 -
Mo-Clamp 1850 Inline Slider
MO-Clamp 1850 Inline Slider – New generation of Mo-Clamps. Self-tightening. Made of heat-treated Tru-Tuff steel alloy. Grabs on to flanges and provides a sure grip while pulling “in-line”. Finger grips are cast into the tool to provide easy handling while positioning the clamp.
Gripping Surface: 3″ (76 mm) Overall Length: 7″ (178 mm) Capacity: 5 tons (4,536 kg) Replacement Parts: #185005 Jaw “A”, #185006 Jaw “B” Heat Treated Steel. Made in the U.S.A.
$155.59$227.97Mo-Clamp 1850 Inline Slider
$155.59$227.97 -
Mo-Clamp 0100 B Clamp
MO-Clamp 0100 B Clamp – Self-Tightening. The body man’s right arm. It grabs 2¼” (57 mm) of metal, making it ideal for hard pulls on heavy metal or frame. Original wedge. Original straight cut tooth design.
$157.12$230.21Mo-Clamp 0100 B Clamp
$157.12$230.21 -
-
Mo-Clamp 4015 Frame Rack Jaws with Angle Bracket
MO-Clamp 4015 Frame Rack Jaws with Angle Bracket – Will hold down cars with horizontal pinch welds including Honda 1990 and up. Angles can be drilled to fit frame racks, benches, etc. Includes two #4044 1/2 ” Shackles.
Gripping Surface: 13″ wide (330mm) Overall Length: 6″ (406mm) Capacity: 6 tons (5,443kg) Replacement Parts: #5200 Nut, Bolt and washer, 840076 spring #4016 Frame rail angle bracket (1 only) Heat Treated Steel. Made in the U.S.A.
$1,672.60$2,508.58Mo-Clamp 4015 Frame Rack Jaws with Angle Bracket
$1,672.60$2,508.58 -
Mo-Clamp 5626 T26 3/8″ Shackle
MO-Clamp 5626 T26 3/8″ Shackle
$28.01$35.57Mo-Clamp 5626 T26 3/8″ Shackle
$28.01$35.57 -
Mo-Clamp 5090 #9 Tool Board with Hooks
MO-Clamp 5090 #9 Tool Board – Keep your tools organized and in good condition with handy tool boards.
The package includes: #5091 Tool Board with Hooks #0045 Angle Bite Clamp #0054 Mini Spring Clamp #0205 Dyna-Mo C Clamp #0305 Dyna-Mo Jr Clamp #0405 Dyna-Mo W Clamp #2450 Boltless Strut Tower Puller #4058 MAC II Multi-Angle Clamp #5616 Door Post Puller/Twister #5091 Toolboard Dimensions: 2’x2′ Tools are Heat Treated Steel and Made in the U.S.A.
$1,256.12$1,883.95Mo-Clamp 5090 #9 Tool Board with Hooks
$1,256.12$1,883.95 -
Mo-Clamp 5830 Saddle Mate
MO-Clamp 5830 Saddle Mate – For use with your Selsun Air Jack. Unique formed shape gives the Saddle Mate superior strength. Custom die form to fit 99-percent of all automobiles.
Overall Length: 10″ (255mm) Heat Treated Steel. Made in the U.S.A
$65.69$89.38Mo-Clamp 5830 Saddle Mate
$65.69$89.38 -
Mo-Clamp 6308 30″ Sling with Snap Rings
MO-Clamp 6308 30″ Sling with Snap Rings – Use as a safeguard against separation, breakage of temporary welds or clamp failure. Not meant for pulling. Use for restraint of chain and clamps only.
Overall Length: 30″ (762mm) Width: 1″ (25mm) Heat Treated Steel. Made in the U.S.A.
$93.11$126.68Mo-Clamp 6308 30″ Sling with Snap Rings
$93.11$126.68 -
Mo-Clamp 0800 Tac-N-Pull with Pull Plates
MO-Clamp 0800 Tac-N-Pull with Pull Plates – For hard-to-hold pulls. Tack weld one of the reusable plates. Attach clamp and pull. Break tack weld with a grinding cut-off wheel or cutting torch. Includes two 3″ plates, two 1 1/4″ plates, and two 1″ plates.
Gripping Surface: Up to 3″ wide (76 mm) Overall Length: 5-1/2″ (140 mm) Capacity: 3 tons (2,722 kg)
Replacement Parts: #0801 1″ Pull Plate, #0802 1-1/2″ Pull Plate, #0803 3″ Pull Plate or #0805 Tac-N-Pull Plate Kit (includes ten 1″ plates, five 1-1/2″ plates, and five 3″ plates) Heat Treated Steel. Made in the U.S.A.
$175.88$204.02Mo-Clamp 0800 Tac-N-Pull with Pull Plates
$175.88$204.02
