-
Dentfix DF-505BP Bridge Puller
The DF-505BP Bridge Puller is a great way for techs to perform controlled panel pulls. The Pull Control Wheel allows the tech to add incremental levels of force and lock the pull in that position.
This bridge puller is able to perform steel or aluminum pulls*
Steel:
When using the DF-505 Maxi System you can pull with wiggle wire or weld keys attached to the panel. For the weld keys you will also need the DF-505KEM Magnetic Key Electrode. Simply weld keys (DF-503KF & DF-503KT) in desired location, connect rod through eyelets in the keys, and attached to the Bridge Puller.Aluminum:
When using an aluminum welder weld M4x12 studs to the panel an attach screw on eyelets to the studs. Install pull rod and bridge puller.*Please note: Working with tools for both steel and aluminum repairs can contaminate the panels affect paint performance, it is best practice not to use on back to back pulls (steel then aluminum, or vice versa) and if you do, thoroughly clean before transferring to another repair. Even better use the tool on one dedicated metal aluminum or steel not both.
$543.56$724.75Dentfix DF-505BP Bridge Puller
$543.56$724.75 -
Dentfix DF-505DM MAXI Massager
Dentfix DF-505DM MAXI Massager – The perfect addition to the Maxi Steel unit (DF-505, sold separately)!
Simply slide the weld rod on the Maxi handle through the Maxi Squeeze Puller and easily massage out steel dents with unrivaled control.
$114.13$130.43Dentfix DF-505DM MAXI Massager
$114.13$130.43 -
Dentfix DF-505GC Ground Cable for Dent Pullers
Dentfix DF-505GC Ground Cable for Dent Pullers
Works with DF-505/220V, DF-505/110, and DF-595II, MAXI, MAXI II, and SHARK II$144.38$192.50Dentfix DF-505GC Ground Cable for Dent Pullers
$144.38$192.50 -
Dentfix DF-506 Nine Finger Bear Claw
DentFix DF-506 Nine Finger Bear Claw – Our nine-fingered claw is designed for heavier panels and pulls that may require a slide hammer or power post. The pulling finger design allows for stronger pulls that may require a slide hammer or come along. With the wiggle wire system over pulling is never a problem.
$67.91$87.62Dentfix DF-506 Nine Finger Bear Claw
$67.91$87.62 -
Dentfix DF-512 Heavy Duty Bear Claw
DentFix DF-512 Heavy Duty Bear Claw – This is one tough Bear Claw. For the heaviest wiggle wire pulls using a power post or our claw slide hammer. Pull rockers evenly and quickly.
$106.34$141.78Dentfix DF-512 Heavy Duty Bear Claw
$106.34$141.78 -
Dentfix DF-595II Hammer Head Removal System
Dent Fix DF-595II Hammer Head Dent Removal System –
Replace your stud welder with the 110 volt DF-595ii HammerHead. Same great quality, same essential accessories that provides the technician with the means to higher productivity and better results. It’s like having sticky fingers and being able to pull dent with your hand.
110 Volt
1 year warranty.
60Lbs
Formerly Know as Shark 2 Dent remover (Name changed by Manufacturer)
Included Items:
Weld pin Tip (1), Washer Tip (1), Shrink Tip (1), Wiggle Wire Tip (1), Short Pull Rod (1), Slide Hammer With Rod and Weight (1), Leverage Rod (1), Ground Magnet (1), # Finger Claw, & 1Pound of Wiggle WireMade in China. 1 year warranty. Use with a 30 amp breaker.
$1,396.34$1,586.75Dentfix DF-595II Hammer Head Removal System
$1,396.34$1,586.75 -
Dentfix DF-615 Multi-Handle Bit Set 90 Pcs.
DentFix DF-615 Multi-Handle Bit Set 90 pieces – Use the patented Multi-Handle to apply torque with any of these 87 drive heads. Hex, Hex Socket, Torx, flat, Phillips, Tri-wing, MorTorq, square socket, security nodes and more. Magnets in the two extensions make sure your heads are secured, so you dont lose them. Kit is shown with DF-613RH optional ratcheting head, not included.
$69.44$89.60Dentfix DF-615 Multi-Handle Bit Set 90 Pcs.
$69.44$89.60 -
Dentfix DF-702C Coarse Replacement Brush
DentFix DF-702C MBX Coarse Replacement Brush – These brushes ride in an aluminum housing that permits the brushes to flex. This movement allows the brushes to compress in tight corners and contour themselves over lipped edges and curved corners. All brushes are compatible with the DF-701 and DF-700 Eliminator kit.
$27.78$35.16Dentfix DF-702C Coarse Replacement Brush
$27.78$35.16 -
Dentfix DF-702H 11mm Replacement Housing for MBX Brush
Dentfix DF-702H 11mm Replacement Housing for MBX Brush
$37.64$47.64 -
Dentfix DF-702SF Stainless Steel Fine Belt, 23mm, 0.5 Wire, Straight Tip
DentFix DF-702SF Stainless Steel Fine Belt, 23mm, 0.5 Wire, Straight Tip
$54.50$70.32 -
Dentfix DF-702SM Stainless Steel Medium Belt 23mm, 0.5 Wire, Bent Tip
DentFix DF-702SM Stainless Steel Medium Belt 23mm, 0.5 Wire, Bent Tip
$54.50$70.32 -
Dentfix DF-705 Vinyl Decal Eraser
Dentfix DF-705 Vinyl Decal Eraser – The original MBX decal eraser sold for over 20 years throughout the world. Perfect for the removal of large decals such as those found on delivery vans. Takes away an inch wide strip at a time. The leading edge chips the sticker away and then rubs the glue. The perfect tool for cleanup of moldings. Use with the DF-701, DF-700 or DF-700DX. Housing sold separately: DF-702H
$32.71$41.40Dentfix DF-705 Vinyl Decal Eraser
$32.71$41.40
