-
Mo-Clamp 0800 Tac-N-Pull with Pull Plates
MO-Clamp 0800 Tac-N-Pull with Pull Plates – For hard-to-hold pulls. Tack weld one of the reusable plates. Attach clamp and pull. Break tack weld with a grinding cut-off wheel or cutting torch. Includes two 3″ plates, two 1 1/4″ plates, and two 1″ plates.
Gripping Surface: Up to 3″ wide (76 mm) Overall Length: 5-1/2″ (140 mm) Capacity: 3 tons (2,722 kg)
Replacement Parts: #0801 1″ Pull Plate, #0802 1-1/2″ Pull Plate, #0803 3″ Pull Plate or #0805 Tac-N-Pull Plate Kit (includes ten 1″ plates, five 1-1/2″ plates, and five 3″ plates) Heat Treated Steel. Made in the U.S.A.
$175.88$204.02Mo-Clamp 0800 Tac-N-Pull with Pull Plates
$175.88$204.02 -
Mo-Clamp 6308 30″ Sling with Snap Rings
MO-Clamp 6308 30″ Sling with Snap Rings – Use as a safeguard against separation, breakage of temporary welds or clamp failure. Not meant for pulling. Use for restraint of chain and clamps only.
Overall Length: 30″ (762mm) Width: 1″ (25mm) Heat Treated Steel. Made in the U.S.A.
$93.11$126.68Mo-Clamp 6308 30″ Sling with Snap Rings
$93.11$126.68 -
Mo-Clamp 5830 Saddle Mate
MO-Clamp 5830 Saddle Mate – For use with your Selsun Air Jack. Unique formed shape gives the Saddle Mate superior strength. Custom die form to fit 99-percent of all automobiles.
Overall Length: 10″ (255mm) Heat Treated Steel. Made in the U.S.A
$65.69$89.38Mo-Clamp 5830 Saddle Mate
$65.69$89.38 -
Mo-Clamp 5090 #9 Tool Board with Hooks
MO-Clamp 5090 #9 Tool Board – Keep your tools organized and in good condition with handy tool boards.
The package includes: #5091 Tool Board with Hooks #0045 Angle Bite Clamp #0054 Mini Spring Clamp #0205 Dyna-Mo C Clamp #0305 Dyna-Mo Jr Clamp #0405 Dyna-Mo W Clamp #2450 Boltless Strut Tower Puller #4058 MAC II Multi-Angle Clamp #5616 Door Post Puller/Twister #5091 Toolboard Dimensions: 2’x2′ Tools are Heat Treated Steel and Made in the U.S.A.
$1,256.12$1,883.95Mo-Clamp 5090 #9 Tool Board with Hooks
$1,256.12$1,883.95 -
Mo-Clamp 5079 #10 Board and Hooks Only
MO-Clamp 5079 #10 Board and Hooks – NO TOOLS
$275.90$413.80Mo-Clamp 5079 #10 Board and Hooks Only
$275.90$413.80 -
Mo-Clamp 4054 1/2″ Screw Pin Shackle with Triangle
MO-Clamp 4054 1/2″ Screw Pin Shackle with Triangle
Capacity: 5 tons (4,536 kg)
$100.54$136.79Mo-Clamp 4054 1/2″ Screw Pin Shackle with Triangle
$100.54$136.79 -
Mo-Clamp 5623 T23 Hinge Plate with 3/8″ Shackle
MO-Clamp 5623 T23 Hinge Plate with 3/8″ Shackle – Use in existing holes in frame structures or body panels. Comes with #5626 3/8″ Shackle for angle pulls.
Overall Length: 4″ (101mm) Capacity: 3 tons (2,722kg) Heat Treated Steel. Made in the U.S.A.
$114.04$155.15Mo-Clamp 5623 T23 Hinge Plate with 3/8″ Shackle
$114.04$155.15 -
Mo-Clamp 5050 #5 Tool Board
MO-Clamp 5050 #5 Tool Board with Tools Including:
- #3120 Small Round Nose Sheet Metal Hook
- #3140 Large Round Nose Sheet Metal Hook
- #4043 Oval Loop
- #4044 1/2″ Screw Pin Shackle
- #4052 Triangle
- #4145 Double Grab Hook Assembly
- #4151 Grab Hook and Single Claw with 18″ Chain
- #4152 Two Single Claws with 18″ Chain
- #4154 Hole Plug and Single Claw with18″ Chain
- #6006 3/8″ X 6″ MO-Clamp Chain
- #6220 3/8″ Super Alloy Clevis Grab Hook
- #6250 3/8″ Alloy Clevis Slip Hook
- #6300 Nylon Sling
- #6350 Cable Sling
- #5051 Tool Board with Hooks
$1,087.97$1,631.75Mo-Clamp 5050 #5 Tool Board
$1,087.97$1,631.75 -
Mo-Clamp 4153 Hole Plug and Clevis Hook
MO-Clamp 4153 Hole Plug and Clevis Hook – Versatile combination for quick hook-ups and multiple pulls. 18-inches of 3/8″ chain included.
Overall Length: 25-1/4″ (654 mm) Working Load Limit: 6,600 lbs Working Load Limit: Refers to the maximum load (rated capability) in pounds that shall be applied in direct tension to a straight length of chain or attachment. NEVER EXCEED THE WORKING LOAD LIMIT of chains or attachments, even when the item is new and the load limit is uniformly applied. Replacement Parts: #5220 Clevis Pin & Rue Clip Heat Treated Steel. Made in the U.S.A.
$120.36$176.35Mo-Clamp 4153 Hole Plug and Clevis Hook
$120.36$176.35 -
Mo-Clamp 4028 BMW Hold Down
MO-Clamp 4028 BMW Hold Down – For holding BMW vehicles with oblong or round jack tube holes.
Overall Length: 14″ (356 mm) Capacity: 6 tons (5,443 kg) Replacement Parts: #5249 Nut, Bolt & Washer, #402801 Rocker Pin Heat Treated Steel. Made in the U.S.A.
$1,515.76$2,273.36Mo-Clamp 4028 BMW Hold Down
$1,515.76$2,273.36 -
Mo-Clamp 4052 Triangle for Double Looper
MO-Clamp 4052 Triangle for Double Looper
Working Load Limit: 3,600 lbs.
$69.78$88.61Mo-Clamp 4052 Triangle for Double Looper
$69.78$88.61 -
Mo-Clamp 7200 Deluxe Centerline Gauge
MO-Clamp 7200 Deluxe Centerline Gauge (w/o Board)
- Measures automatic centerline for all vehicles
- For use with foreign and domestic
- Exceptional reliability and accuracy
- Recessed tapes for efficient reading and durability
- Made of rugged, light-weight cast aluminum
- Measures in metric units.
- Instruction manual included
- Compatible with all data books.
- Includes (4) #710161 8″ (203mm) Vertical Scales
- Includes (2) #710163 16″ (406mm) Vertical Scales
- Includes (2) #710164 24″ (610mm) Vertical Scale
Note: Some Vehicles may require optional Vertical Scales (That are not included with this kit)
- Optional #710162 12″ (305mm) Vertical Scale – Sold Separately
- Optional #710165 30″ (762mm) Vertical Scale- Sold Separately
Replacement Parts: #710161 8″ (203mm) Vertical Scale, #710163 16″ (406mm) Vertical Scale, #710164 24″ (610mm) Vertical Scale, #710129 Board Only, #710131 Hook Set Only Heat Treated Steel. Made in the U.S.A.
$1,955.52$2,932.91Mo-Clamp 7200 Deluxe Centerline Gauge
$1,955.52$2,932.91
