-
Mo-Clamp 4021 Frame Rack Dyna-Mo #1
MO-Clamp 4021 Frame Rack Dyna-Mo #1 – One pair Frame Rack Dyna-mo jaws with 7″ draw bar, one side pull bracket, shackle and oval loop. Raised “ears” to hold bolt in place while tightening. Machine tooth design.
Gripping Surface: 3-1/2″ wide (95 mm) Overall Length: 7″ (178 mm) Capacity: 5 tons (4,536 kg) Replacement Parts: #4043 Oval Loop, #4055 7/16″ Shackle, #5200 Nut, Bolt & Washer, #200203 Side Pull Bracket Heat Treated Steel. Made in the U.S.A.
$300.22$450.27Mo-Clamp 4021 Frame Rack Dyna-Mo #1
$300.22$450.27 -
Dentfix DF-AB711 7 Pc. Rubber Dolly Set
DentFix DF-AB711 7PC Rubber Dolly Set – Dense rubber covering absorbs harsh impacts.
$296.88$395.84Dentfix DF-AB711 7 Pc. Rubber Dolly Set
$296.88$395.84 -
Mo-Clamp 6420 Mini Deep Hook
MO-Clamp 6420 Mini Deep Hook – For fast hook-ups on cowls, door posts and trunk openings, or to reach into cramped places. Includes #210060 Horizontal Bracket and #210070 Vertical Bracket. Brackets are interchangeable with the #6400 Regular Deep Hook Set and #6410 Jumbo Deep Hook Set.
Overall Length: 13″ (330mm) Throat Depth: 6″ (152mm) Throat Opening: 9″ (229mm) Capacity: 4 tons (3,629kg) Replacement Parts: #210060 Horizontal Bracket, #210070 Verticle Bracket, #520050 Pin Heat Treated Steel. Made in the U.S.A.
$295.41$443.06Mo-Clamp 6420 Mini Deep Hook
$295.41$443.06 -
Mo-Clamp 0551 Original Tight Opening Clamp
MO-Clamp 0551 Original Tight Opening Clamp – Mo-Clamp’s re-introduced the Tight Opening Clamp due to popular demands for the old design. Still a full 3 ton capacity. Still able to reach core support and upper sheet metal areas where no other can. Perfect for small pick-up frame rails.
Gripping Surface: 1½” wide (38 mm), ½” deep (13 mm) Overall Length: 6½” (165 mm) Capacity: 3 tons (2,722 kg) Heat Treated Steel. Made in the U.S.A.
$292.50$438.70Mo-Clamp 0551 Original Tight Opening Clamp
$292.50$438.70 -
Mo-Clamp 3100 Sheet Metal Hooks – Set
MO-Clamp 3100 Sheet Metal Hooks – Set – Alloy heat-treated hooks increase pulling options. May be used with Hole Pull Plates (#0810 & 0820) to pull, or use in combination with clamps. Includes one of each: #3110, #3120, #3130, #3140.
Capacity: 2 tons (1,814 kg) Replacement Parts: #4051 Eye Nut, #3110 Small Flat Nose Hook, #3120 Small Round Nose Hook, #3130 Large Flat Nose Hook, #3140 Large Round Nose Hook Heat Treated Steel. Made in the U.S.A.
$291.25$436.82Mo-Clamp 3100 Sheet Metal Hooks – Set
$291.25$436.82 -
Mo-Clamp 0450 Flash Clamp 5ton
MO-Clamp 0450 Flash Clamp 5 Ton – New Mo-Grip surfaced jaws provide superior traction when coupled with pivoting head for uneven surfaces. Spring-loaded operation means no impacting to tighten. Heat-treated investment cast jaws provide years of effective pulling power. Drop-forged wedge. Jaws can be easily replaced.
Capacity: 5 tons (4,536 kg) Length: 8″ (203 mm) Width: 2″ (50.7 mm) Weight: 3 lbs (1.36 kg) Replacement Parts: #010453 Pivot Jaw, #010702 Small Round Wedge, #520039 Pivot Pins, #520033 Retaining Bolt, #840076 Spring Heat Treated Steel. Made in the U.S.A.
$289.23$433.79Mo-Clamp 0450 Flash Clamp 5ton
$289.23$433.79 -
Zinko ZPJ-850C 0.93 Ton Panta Graph Jack
This handy little specialized jack has a minimun lowered height of 4.76″. It is perfect for lifting of passenger car frames to replace a tire / wheels or to install and take off snow chains. This very satile automotive jack can be used for a wide variety of uses. Lightweight, compact and very easy to operate.
Special Features:
Rapidly raises a vehicle with minimal effort.
Easy to operate.
Lightweight and compact.
Low profile with long stroke.
Rugged steel base to prevent leaking
High strength aluminum cap saddle to receive vehicle panel rail.
Special coating on the ram and piston plunger to provide extra corrosion protection.
More Information
Capacity (Tons) :0.93
Minimum Height (in) :4.76
Hydraulic Lift (in) :10.24
Maximum Heights (in) :15.00
Chassis Length (in) :15.35
Chassis Width (in) :4.60
Weight (lbs) :18.000000$280.23$312.75Zinko ZPJ-850C 0.93 Ton Panta Graph Jack
$280.23$312.75 -
Mo-Clamp 5079 #10 Board and Hooks Only
MO-Clamp 5079 #10 Board and Hooks – NO TOOLS
$275.90$413.80Mo-Clamp 5079 #10 Board and Hooks Only
$275.90$413.80 -
Dentfix DF-15DBV Special Drill Bit Variety Pack
Dentfix DF-15DBV Special Drill Bit Variety Pack – 3/1480, 3/1680T, 3/1610, 1/1690
$270.20$360.26Dentfix DF-15DBV Special Drill Bit Variety Pack
$270.20$360.26 -
Mo-Clamp 2450 Boltless Strut Tower Puller
MO-Clamp 2450 Boltless Strut Tower Puller – Easy, fast, reliable method for pulling strut towers. Developed for strut towers without bolts, to correct chassis dimensions to factory specifications. Strut tower removal is necessary.
Overall Length: 5″ (127 mm) Capacity: 3 tons (2,722 kg) Replacement Parts: #4051 Eye Nut, #100441 Numerous Angle Puller, #500053 Bolt Heat Treated Steel. Made in the U.S.A.
$268.42$402.58Mo-Clamp 2450 Boltless Strut Tower Puller
$268.42$402.58 -
Mo-Clamp 0680 Big Mouth Clamp
MO-Clamp 0680 Big Mouth Clamp – Self-tightening. A perfect solution for hard-to-get-to areas. Great where large opening is needed. Original wedge; cross-hatch tooth design; spring-loaded for easy opening. Throat clearance of 2¼” high (57 mm), 1¼” deep (32 mm).
Gripping Surface: 1¾” wide (45 mm), 1″ deep (25 mm) Overall Length: 9½” (241 mm) Capacity: 5 tons (4,536 kg) Replacement Parts: #9701 Wedge, #5253 Nut, Bolt, Spring & Washer Heat Treated Steel. Made in the U.S.A.
$255.60$374.50Mo-Clamp 0680 Big Mouth Clamp
$255.60$374.50 -
DentFix FBS16 Finger Belt Sander
DentFix FBS16 File Belt Sander- 16,000 RPM, 90 PSI Finger Belt Sander
Dimensions 3.25 x 2.5 x 12 in$246.81$290.36DentFix FBS16 Finger Belt Sander
$246.81$290.36
