-
Mo-Clamp 0053 A Clamp with Pull Ring
MO-CLAMP 0053 A Clamp with Pull Ring – The A Clamp grips narrow seams and ridges. Hardened steel cross-hatch teeth assure a secure pull. Excellent for use with slide hammer. Clamp has raised “bolt stoppers” to hold bolts stationary, for easy, one-handed tightening. Includes pull ring for easy chain hook-up that swivels in the direction from which you want to pull. Use only with ¼” chain.
$132.03$193.45Mo-Clamp 0053 A Clamp with Pull Ring
$132.03$193.45 -
Mo-Clamp 4059 5/8″ Screw Pin Shackle
MO-Clamp 4059 5/8″ Screw Pin Shackle
$49.60$62.98Mo-Clamp 4059 5/8″ Screw Pin Shackle
$49.60$62.98 -
Mo-Clamp 5818 3″ Down Pulley
MO-Clamp 5818 3″ Down Pulley – A new smaller down pulley from Mo-Clamp provides the same benefits of our 5 down pulley in a smaller version. Made of Mo-Clamp Tru-Tuff steel alloy and covered by our forever warranty, this tool will give you years of trouble-free service. The existing Mo-Clamp Block Pulley Adapter (part number 5811) is interchangeable between the two down pulley tools, giving the technician great flexibility to use the tool which meets their needs and space requirements.
$240.99$353.10Mo-Clamp 5818 3″ Down Pulley
$240.99$353.10 -
Mo-Clamp 6306 GM “R” Hook with 3/8″ X 11″ Chain
MO-Clamp 6306 GM “R” Hook with 3/8″ X 11″ Chain – Original shipping tie down for GM vehicles. Excellent around the frame machine to help hold a frame while diamond is being pulled.
Overall Length 9″ (228mm) Capacity 4 tons (3,629kg)
$54.05$68.64Mo-Clamp 6306 GM “R” Hook with 3/8″ X 11″ Chain
$54.05$68.64 -
Mo-Clamp 3071 Mo-Ty Chain Tie Down Anchor Pull Pot
MO-Clamp 3071 MO-TY Chain Tie Down Anchor Pull Pot – The harder you pull the firmer it wedges. Allows full 360 degrees of pull without chain touching floor. Can be removed and installed in a different location. When correctly installed, top is flush with floor when not in use. Can be easily cleaned by lifting top. A 3-1/2″ (89mm) cored hole is required in concrete floor.
Capacity: 10 tons (9,072 kg) Heat Treated Steel. Made in the U.S.A.
$110.10$149.80Mo-Clamp 3071 Mo-Ty Chain Tie Down Anchor Pull Pot
$110.10$149.80 -
Mo-Clamp 6350 Cable Sling
MO-Clamp 6350 Cable Sling – Wrap around pulls. Can be used as a choker.
Overall Length: 36″ (915mm) Vertical Capacity: 1.5 tons (1,360kg) Choke Capacity: 1 ton (907kg) Basket Capacity: 2.5 tons (2,268kg) Made in the U.S.A.
$58.39$74.15Mo-Clamp 6350 Cable Sling
$58.39$74.15 -
Mo-Clamp 6420 Mini Deep Hook
MO-Clamp 6420 Mini Deep Hook – For fast hook-ups on cowls, door posts and trunk openings, or to reach into cramped places. Includes #210060 Horizontal Bracket and #210070 Vertical Bracket. Brackets are interchangeable with the #6400 Regular Deep Hook Set and #6410 Jumbo Deep Hook Set.
Overall Length: 13″ (330mm) Throat Depth: 6″ (152mm) Throat Opening: 9″ (229mm) Capacity: 4 tons (3,629kg) Replacement Parts: #210060 Horizontal Bracket, #210070 Verticle Bracket, #520050 Pin Heat Treated Steel. Made in the U.S.A.
$295.41$443.06Mo-Clamp 6420 Mini Deep Hook
$295.41$443.06 -
Mo-Clamp 6011 3/8″ X 10′ Chain with Welded Slip Hook
Mo-Clamp 6011 3/8″ X 10′ Chain with Welded Slip Hook
$197.93$290.00Mo-Clamp 6011 3/8″ X 10′ Chain with Welded Slip Hook
$197.93$290.00 -
Mo-Clamp 6302 30″ Nylon Sling with Pear and Triangle
MO-Clamp 6302 30″ Nylon Sling with Pear and Triangle – Protects finish from mars. Wraps around and protects pillars while spreading the force. Forged pull loops for exceptional toughness.
Overall Length: 30″ (790mm) Width: 4″ (102mm) Vertical Capacity: 2,400 lbs (1,088kg) Choke Capacity: 1,500 lbs (680kg) Basket Capacity: 2 tons (1,814kg) Heat Treated Steel. Made in the U.S.A.
$145.66$213.42Mo-Clamp 6302 30″ Nylon Sling with Pear and Triangle
$145.66$213.42 -
Mo-Clamp 0805 Pull Plate Kit for Tac-N-Pull
MO-Clamp 0805 Pull Plate Kit for Tac-N-Pull – For hard-to-hold pulls. Tack weld one of the reusable plates. Attach clamp and pull. Break tack weld with a grinding cut-off wheel or cutting torch.
- Ten (10) 1″ Pull Plates
- Five (5) 1-1/2″ Pull Plates
- Five (5) 3″ Pull Plates.
The Pull Plate Kit includes: Ten (10) #0801 1″ Pull Plates Five (5) #0802 1-1/2″ Pull Plates Five (5) of #0803 3″ Pull Plates. For use with the #0800 Tac-N-Pull Clamp. (Clamp not included in kit.) Heat Treated Steel. Made in the U.S.A.
$151.36$205.93Mo-Clamp 0805 Pull Plate Kit for Tac-N-Pull
$151.36$205.93 -
Mo-Clamp 6210 3/8″ Alloy Clevis Grab Hook
MO-Clamp 6210 3/8″ Alloy Clevis Grab Hook
$34.40$43.68Mo-Clamp 6210 3/8″ Alloy Clevis Grab Hook
$34.40$43.68 -
Mo-Clamp 7051 Baby Tram Gauge with Cardboard Box
MO-Clamp 7051 Baby Tram Gauge with Cardboard Box – Tram Instruments are a versatile and indispensable tool for determining collision damage to uni-body cars and for checking critical measurements during repair. Use the tram to check dimensions between control points on suspension and mechanical components. The Tram Instrument makes it easy to establish dimensions around components and to check contours by comparing measurements from one side of the vehicle to the other. Measures from 2-1/2″ (65mm) to 7′ (2.1m). Level bubble installed in sliding head for accuracy in measurement. Comes in a cardboard box. Made in the U.S.A.
$757.24$1,135.72Mo-Clamp 7051 Baby Tram Gauge with Cardboard Box
$757.24$1,135.72
