-
Mo-Clamp 0805 Pull Plate Kit for Tac-N-Pull
MO-Clamp 0805 Pull Plate Kit for Tac-N-Pull – For hard-to-hold pulls. Tack weld one of the reusable plates. Attach clamp and pull. Break tack weld with a grinding cut-off wheel or cutting torch.
- Ten (10) 1″ Pull Plates
- Five (5) 1-1/2″ Pull Plates
- Five (5) 3″ Pull Plates.
The Pull Plate Kit includes: Ten (10) #0801 1″ Pull Plates Five (5) #0802 1-1/2″ Pull Plates Five (5) of #0803 3″ Pull Plates. For use with the #0800 Tac-N-Pull Clamp. (Clamp not included in kit.) Heat Treated Steel. Made in the U.S.A.
$151.36$205.93Mo-Clamp 0805 Pull Plate Kit for Tac-N-Pull
$151.36$205.93 -
Mo-Clamp 4154 Hole Plug and Single Claw
MO-Clamp 4154 Hole Plug and Single Claw – Versatile combination for quick hook-ups and multiple pulls. 18-inches of 3/8″ chain included.
Overall Length: 26″ (672 mm) Working Load Limit: 6,600 lbs Working Load Limit: Refers to the maximum load (rated capability) in pounds that shall be applied in direct tension to a straight length of chain or attachment. NEVER EXCEED THE WORKING LOAD LIMIT of chains or attachments, even when the item is new and the load limit is uniformly applied. Replacement Parts: #5220 Clevis Pin & Rue Clip Heat Treated Steel. Made in the U.S.A.
$149.71$219.35Mo-Clamp 4154 Hole Plug and Single Claw
$149.71$219.35 -
Mo-Clamp 0054 Mini Spring Clamp
MO-Clamp 0054 Mini Spring Clamp – Spring loaded for easy opening. Includes Oval Loop for use with Slip Hook for easy hook-up. For light sheet metal in those tight places. Cross-hatch tooth design for an aggressive bite. Clamp has raised “ears” to hold bolts stationary, for easy, one-handed tightening.
$149.06$218.41Mo-Clamp 0054 Mini Spring Clamp
$149.06$218.41 -
Mo-Clamp 6600 Chain Snugger
MO-Clamp 6600 Chain Snugger – Tightens chain when used with a #1700 Chain Locking Fork on frame racks and other applications.
Overall Length: 12″ (305mm) Capacity: 6 tons (5,443kg) Heat Treated Steel. Made in the U.S.A.
$149.06$218.41Mo-Clamp 6600 Chain Snugger
$149.06$218.41 -
Mo-Clamp 3051 T-top Anchor Pot (1 Only)
MO-Clamp 3051 T-Top Anchor Pot – An anchoring system for versatile pulling. Insert 3/8″ frame straightening chain, anchor with lock cap, and pull from any direction or angle. Lock cap keeps out dirt and dust when not in use. Includes sleeve and lock cap. 3-1/2″ (89mm) cored hole required. 3060 Cast-in Model is available for new floors.
Capacity: 10 tons (9,072 kg) Replacement Parts: #300210 Welded Cap Heat Treated Steel. Made in the U.S.A.
$148.28$201.74Mo-Clamp 3051 T-top Anchor Pot (1 Only)
$148.28$201.74 -
Mo-Clamp 1650 Double Eye Chain Hook
MO-Clamp 1650 Double Eye Chain Hook – A handy chain hook-up pulling plate for making double pulls. The special design allows for both wide or narrow pulls. Double pulls, using multiple self-tightening clamps, can be made from the same pulling tower or pulling post. Features Mo-Clamp easy chain hook-up system. Designed for use with 3/8″ chain.
Overall Length: 6-1/2″ (165 mm) Capacity: 5 tons (4,536 kg) Heat Treated Steel. Made in the U.S.A.
$146.77$199.69Mo-Clamp 1650 Double Eye Chain Hook
$146.77$199.69 -
Mo-Clamp 0655 Dyna-Mo Box Clamp
MO-Clamp 0655 Dyna-Mo Box Clamp – These heat-treated jaws reach around flanges and other obstructions to get a grip on hard-to-reach surfaces. Severe duty tooth design for aggressive pulling power.
Gripping Surface: 1¼” wide (32 mm), ½” deep (10 mm) Overall Length: 8″ (201 mm) Capacity: 3 tons (2,722 kg) Replacement Parts: #9702 Wedge, #5254 Nut, Bolt, Spring & Washer Heat Treated Steel. Made in the U.S.A.
$146.09$214.05Mo-Clamp 0655 Dyna-Mo Box Clamp
$146.09$214.05 -
Mo-Clamp 6302 30″ Nylon Sling with Pear and Triangle
MO-Clamp 6302 30″ Nylon Sling with Pear and Triangle – Protects finish from mars. Wraps around and protects pillars while spreading the force. Forged pull loops for exceptional toughness.
Overall Length: 30″ (790mm) Width: 4″ (102mm) Vertical Capacity: 2,400 lbs (1,088kg) Choke Capacity: 1,500 lbs (680kg) Basket Capacity: 2 tons (1,814kg) Heat Treated Steel. Made in the U.S.A.
$145.66$213.42Mo-Clamp 6302 30″ Nylon Sling with Pear and Triangle
$145.66$213.42 -
Dentfix DF-505GC Ground Cable for Dent Pullers
Dentfix DF-505GC Ground Cable for Dent Pullers
Works with DF-505/220V, DF-505/110, and DF-595II, MAXI, MAXI II, and SHARK II$144.38$192.50Dentfix DF-505GC Ground Cable for Dent Pullers
$144.38$192.50 -
Dent Fix EZ Tab Plastic Tab Repair Kit
Must have plastic welding accessory that recreates the perfect slot tabs!
The Plastic Tab Repair Kit assists in performing fast, strong slot tab repairs on plastic parts. Choose from a set of 5 different sized slot dies, ranging in size from ¼” (6mm) to ¾” (19mm), to repair virtually all the current slot tabs.
The included hand seemer is used to compress the tab and angle after welding.
Slim profile dies help the hand seamer lay down flatter and give abetter shape when compressed. The hand seemer is double hinged to allow it to compress the angle in a much flatter manner than single hinged hand seemers. A big 3” head compresses a larger area of the damage tab angle reducing warping and high spots. Each slot die is color coordinated for better identification and powder coated for durability. Perfect when using our EZ Nitro Welders (optional) and our Hot Staplers that utilize StapleClips.
APPLICATION
Simplifies and assists in the plastic welding repair procedure of slot tabs.FEATURE & BENEFITS
• 5 DIFFERENT SIZE DIES – Two of each size covers virtually all the current slot tabs.
• LAY FLAT DESIGN – Slim prole dies & double hinged hand seamer compress the angle much flatter.
• LARGE COMPRESSION SURFACE – 3” head reduces warping.
• COLOR POWDER COATING – Die sets are color coordinated and coated for protection.SPECIFICATIONS
NUMBER OF DIES: 10 (2 of each size)
TAB SIZES: Blue 3/4” (19mm) • Yellow 5/8“ (16mm) • Red 1/2” (13mm) • White 3/8“ (9.5mm) • Green 1/4” (6mm)
TAB MATERIAL: Powder Coated, 18 Gauge Steel
SEEMER MATERIAL: Drop Forged Steel
SEEMER HEAD: 3”
SEEMER HINGE: DoubleWORKS WITH
DF-EZN1 | DF-EZN1G | DF-EZN1G/DXESTORAGE
Locking handle for better tool storage and plastic box with snap lid for tab organization$144.27$180.34Dent Fix EZ Tab Plastic Tab Repair Kit
$144.27$180.34 -
Mo-Clamp 1255 Large Panel Puller
MO-Clamp 1255 Large Panel Puller – A perfect companion to the smaller 1250, the large panel puller allows the technician to increase the length of contact when pulling a panel into shape. Made of Mo-Clamp Tru-tuff steel alloy, this tool will last a lifetime and is covered by the Mo-Clamp “Forever” warranty. Use it in any situation where you need to get behind a pull. Made in USA.
Capacity: 3 tons (2,722kg) Length: 9″ (22.86cm) Pulling Surface: 4.75″ (12.06cm)
$144.23$211.33Mo-Clamp 1255 Large Panel Puller
$144.23$211.33 -
Mo-Clamp 4047 Frame Rack Draw Bar
MO-Clamp 4047 Frame Rack Draw Bar – Great for bolting to a frame, unibody rail or to other places to make a secure pull. Each bar has a combination of hole patterns to facilitate bolting to a vehicle. May be used in conjunction with various accessory items for specialized pulling needs.
Overall Length: 14-1/2″ (368 mm) Width: 2-1/2″ (64 mm) Capacity: 3 tons (2,722 kg) Replacement Parts: #4044 1/2 ” Shackle, #4043 Oval Loop Heat Treated Steel. Made in the U.S.A.
$143.91$210.86Mo-Clamp 4047 Frame Rack Draw Bar
$143.91$210.86
