-
Dentfix DF-310 Control Point Lock for DF-3 Tram Gauge
DentFix DF-310 Control Point Lock for DF-3 Tram Gauge
$108.08$144.10Dentfix DF-310 Control Point Lock for DF-3 Tram Gauge
$108.08$144.10 -
DentFix 15DBS Drill Bit Service Pack
DentFix 15DBS Drill Bit Service Pack
$108.08$144.11DentFix 15DBS Drill Bit Service Pack
$108.08$144.11 -
Mo-Clamp 5820 Pinch Weld Brackets – Set of 4
MO-Clamp 5820 Pinch Weld Brackets – Weld-on pinch weld brackets. 12″ brackets for welding to bottom of automobiles without pinch welds. Works with most pinch weld holding systems. Allows for hook-up to a frame rack or hold-down system.
Overall Length: 12″ (305mm) Capacity: 2 tons (1,814kg) Heat Treated Steel. Made in the U.S.A.
$108.08$158.36Mo-Clamp 5820 Pinch Weld Brackets – Set of 4
$108.08$158.36 -
Mo-Clamp 4151 Grab Hook and Single Claw
MO-Clamp 4151 Grab Hook and Single Claw – Versatile combination for quick hook-ups and multiple pulls. 18-inches of 3/8″ chain included.
Overall Length: 24″ (610 mm) Working Load Limit: 6,600 lbs Working Load Limit: Refers to the maximum load (rated capability) in pounds that shall be applied in direct tension to a straight length of chain or attachment. NEVER EXCEED THE WORKING LOAD LIMIT of chains or attachments, even when the item is new and the load limit is uniformly applied.
$108.18$158.50Mo-Clamp 4151 Grab Hook and Single Claw
$108.18$158.50 -
Mo-Clamp 1800 Track Hook
MO-Clamp 1800 Track Hook – Quick tie-down for track systems or back anchoring on frame racks. Lip can be used for pulling damaged areas; varied multiple uses for chain lengthening or shortening. Slot can be used for chain hook-up. Designed for use with 3/8″ chain.
Gripping Surface: 3″ wide (76 mm) Overall Length: 6″ (165 mm) Capacity: 6 tons (5,443 kg) Heat Treated Steel. Made in the U.S.A.
$110.08$149.77Mo-Clamp 1800 Track Hook
$110.08$149.77 -
Mo-Clamp 3071 Mo-Ty Chain Tie Down Anchor Pull Pot
MO-Clamp 3071 MO-TY Chain Tie Down Anchor Pull Pot – The harder you pull the firmer it wedges. Allows full 360 degrees of pull without chain touching floor. Can be removed and installed in a different location. When correctly installed, top is flush with floor when not in use. Can be easily cleaned by lifting top. A 3-1/2″ (89mm) cored hole is required in concrete floor.
Capacity: 10 tons (9,072 kg) Heat Treated Steel. Made in the U.S.A.
$110.10$149.80Mo-Clamp 3071 Mo-Ty Chain Tie Down Anchor Pull Pot
$110.10$149.80 -
$111.15
$127.82Dentfix Dent Puller Leverage Bar – DF-505L
$111.15$127.82 -
Mo-Clamp 5623 T23 Hinge Plate with 3/8″ Shackle
MO-Clamp 5623 T23 Hinge Plate with 3/8″ Shackle – Use in existing holes in frame structures or body panels. Comes with #5626 3/8″ Shackle for angle pulls.
Overall Length: 4″ (101mm) Capacity: 3 tons (2,722kg) Heat Treated Steel. Made in the U.S.A.
$114.04$155.15Mo-Clamp 5623 T23 Hinge Plate with 3/8″ Shackle
$114.04$155.15 -
Dentfix DF-505DM MAXI Massager
Dentfix DF-505DM MAXI Massager – The perfect addition to the Maxi Steel unit (DF-505, sold separately)!
Simply slide the weld rod on the Maxi handle through the Maxi Squeeze Puller and easily massage out steel dents with unrivaled control.
$114.13$130.43Dentfix DF-505DM MAXI Massager
$114.13$130.43 -
Mo-Clamp 5011 #1 Board and Hooks
MO-Clamp 5011 #1 Board and Hooks – Tool board only with hooks.
$114.35$167.55Mo-Clamp 5011 #1 Board and Hooks
$114.35$167.55 -
Mo-Clamp 1900 Quick Hook
MO-Clamp 1900 Quick Hook – Four hole-size selection for quick hook-ups in existing frame holes for pulling of damaged frames. Uses Mo-Clamp’s easy chain hook-up system. Hole sizes: 1-7/8″ (48 mm), 1-5/8″ (41 mm), 1″ (25 mm), 7/8″ (22 mm).
Overall Length: 6-1/2″ (165 mm) Capacity: 4 tons (3,629 kg) Heat Treated Steel. Made in the U.S.A.
$115.58$157.25Mo-Clamp 1900 Quick Hook
$115.58$157.25 -
Mo-Clamp 1150 Chain Spreader Bar
MO-Clamp 1150 Chain Spreader Bar – The Chain Spread Bar enables the body man to make pulls around box rails or other obstacles, while maintaining the distance between pulling clamps.
Overall Length: 11″ (280 mm) Capacity: 5 tons (4,536 kg) Heat Treated Steel. Made in the U.S.A.
$116.96$159.13Mo-Clamp 1150 Chain Spreader Bar
$116.96$159.13
