-
DentFix FBS16 Finger Belt Sander
DentFix FBS16 File Belt Sander- 16,000 RPM, 90 PSI Finger Belt Sander
Dimensions 3.25 x 2.5 x 12 in$246.81$290.36DentFix FBS16 Finger Belt Sander
$246.81$290.36 -
Dentfix DF-503SW Slide Weight for DF-505
DentFix DF-503SW Slide weight to be used with the long rods (DF-503L) from the Maxi 505 Multiple Pull Dent Station 220V and 100V.
$33.65$42.60Dentfix DF-503SW Slide Weight for DF-505
$33.65$42.60 -
Dent Fix DF-595IICB Circuit Board
Dent Fix DF-595IICB
Circuit Board
Relay Not Included
Relay Bolts to Board Part# df-595IIR
For model# 595II$190.85$254.47Dent Fix DF-595IICB Circuit Board
$190.85$254.47 -
Dentfix DF-I9315CW Cutting Wheel 100 X 1 X 10MM 25 Pc. Set
The DentFix DF-i9315CW Cutting Wheel is a replacement consumable for the DF-i9314 Reversible Air Cut-Off Wheel and DF-i9315CR Long Corner Grinder.
Box of 25 wheels.
$87.02$112.29 -
Dentfix DF-900BHND Bolster Head Nylon Dolly
DentFix DF-900BHND Bolster Head Nylon Dolly
$84.91$113.21Dentfix DF-900BHND Bolster Head Nylon Dolly
$84.91$113.21 -
DentFix WK20 Plastic Lever Scraper
DentFix WK20 Plastic Lever Scraper- Designed specifically for windshileds this tool has found its way into many other uses. Any time you need a tool that will not scratch soft surfaces. Work on the dash, door panel, remove vents and scrape painted surfaces.
$5.21$6.72DentFix WK20 Plastic Lever Scraper
$5.21$6.72 -
Dentfix DF-702SF Stainless Steel Fine Belt, 23mm, 0.5 Wire, Straight Tip
DentFix DF-702SF Stainless Steel Fine Belt, 23mm, 0.5 Wire, Straight Tip
$54.50$70.32 -
Dentfix DF-505DM MAXI Massager
Dentfix DF-505DM MAXI Massager – The perfect addition to the Maxi Steel unit (DF-505, sold separately)!
Simply slide the weld rod on the Maxi handle through the Maxi Squeeze Puller and easily massage out steel dents with unrivaled control.
$114.13$130.43Dentfix DF-505DM MAXI Massager
$114.13$130.43 -
Static Gun – DF-EZAP – By Dent Fix
Dent Fix DF-EZAP StaticZap – anti-static device that keeps the surface clean during the paint process to avoid unnecessary reworking and buffing, saving both time and money.
Static attracts dust and unwanted particles, making it very difficult to keep surfaces clean and causing blemishes in the paints finish and other work surfaces. Its absolutely essential to eliminate static from the environmentat every stage of paintingin order to avoid costly reworking.
The StaticZap incorporates the efficiency and power of an air amplifier with the proven technology of corona ionization to produce a highly effective anti-static blow-off gun. Perform the anti-static blow off before starting and at every stage in the painting process to eliminate fisheyes and produce a finish that looks like glass.
The two-minute anti-static process will eliminate the need for wet sanding and buffing which saves time on prep work and also cuts down on labor and materials.
The Kit includes a lightweight, durable gun, rechargeable lithium ion battery, two emitter pins, and safety keys.
$1,196.25$1,595.00Static Gun – DF-EZAP – By Dent Fix
$1,196.25$1,595.00 -
DentFix WK20/10 Package of 10 Winshield Sticks
DentFix WK20/10 Package of 10 Winshield Sticks
$50.77$65.51DentFix WK20/10 Package of 10 Winshield Sticks
$50.77$65.51 -
Dentfix DF-595II Hammer Head Removal System
Dent Fix DF-595II Hammer Head Dent Removal System –
Replace your stud welder with the 110 volt DF-595ii HammerHead. Same great quality, same essential accessories that provides the technician with the means to higher productivity and better results. It’s like having sticky fingers and being able to pull dent with your hand.
110 Volt
1 year warranty.
60Lbs
Formerly Know as Shark 2 Dent remover (Name changed by Manufacturer)
Included Items:
Weld pin Tip (1), Washer Tip (1), Shrink Tip (1), Wiggle Wire Tip (1), Short Pull Rod (1), Slide Hammer With Rod and Weight (1), Leverage Rod (1), Ground Magnet (1), # Finger Claw, & 1Pound of Wiggle WireMade in China. 1 year warranty. Use with a 30 amp breaker.
$1,396.34$1,586.75Dentfix DF-595II Hammer Head Removal System
$1,396.34$1,586.75 -
Dentfix DF-900PF Self Locking Alu Pin Finger
DentFix DF-900PF Self Locking Alu Pin Finger – an innovative pull finger that attaches to a welded pin for dent pulls on automotive aluminum panels. Simply slide the pull finger over the stud to engage. The slide finger will hold onto the stud until it is disengaged by pressing the release lever. Dent Fix pull fingers are quicker to attach and disengage than screw-on type pull fingers.
Attach a pull devices to the fingers for a reliable and sturdy pull. For crease pulls, multiple pull fingers can be used together when attached to welded studs in a row. A bar can then be fed through the pull finger eyelet and attached to a bridge puller.
Dent Fixs Pull Finger, when used with Dent Fix Alu-Studs DF-900PS and DF-900PM, is also adjustable. Due to the extra length of the Alu-Stud pin, the pull finger can slide up or down the pin if an adjustment needs to be made mid-pull. This adjustment feature is not available when using screw-on fingers.
Sold individually.
$49.28$62.38Dentfix DF-900PF Self Locking Alu Pin Finger
$49.28$62.38
