-
Mo-Clamp 5900 Mini Bite
MO-Clamp 5900 Mini Bite – The reversible Mini-Bite Clamp is designed to get around lips and corners for strong pulls and to pull narrow seams and lips. Cross-hatch tooth design assures a firm grip. Designed for use with a 3/8″ chain.
Overall Length: 6″ (152mm) Overall Width: 1-1/4″ (38mm) Gripping Surface: 1-1/4″ wide (45mm), 1″ deep (25mm) Capacity: 3 tons (2,722kg) Replacement Parts: #520046 Bolt, #5226 Nut, Bolt & Washer, #000120 Mini Pull Ring Heat Treated Steel. Made in the U.S.A.
$138.84$203.43Mo-Clamp 5900 Mini Bite
$138.84$203.43 -
Mo-Clamp 4049 Frame Wrench
MO-Clamp 4049 Frame Wrench – Allows easy access to the bends and waves resulting from frame straightening. Helps in achieving the “pre-accident condition” look. Eliminates unsightly hammer marks of the frame. Designed for c-frame construction. Two different angles to access the difficult underside of vehicles.
Overall Length: 15″ (381 mm) Capacity: 5 tons (4,536 kg) Heat Treated Steel. Made in the U.S.A.
$95.81$130.36Mo-Clamp 4049 Frame Wrench
$95.81$130.36 -
Mo-Clamp 4042 Female Clamp Jaw with Nut, Bolt, Spring, and Washer for MO-4025
MO-Clamp 4042 Female Clamp Jaw with Nut, Bolt, Spring, and Washer for MO-4025
$102.11$138.93 -
Mo-Clamp 1450 Numerous Angle Puller
MO-Clamp 1450 Numerous Angle Puller – The NAP allows pulls from any angle. Just put the bolt through a 1/2″ hole and pull. Use with #2100 or #2400 Multi-Adapter Plates, or with back-up plates. Designed for use with 3/8″ chain.
Overall Length: 6″ (152 mm) Capacity: 4 tons (3,629 kg) Replacement Parts: #5245 Nut, Bolt, & Washer Heat Treated Steel. Made in the U.S.A.
$74.81$101.78Mo-Clamp 1450 Numerous Angle Puller
$74.81$101.78 -
Mo-Clamp 6260 3/8″ Alloy Clevis Slip Hook
MO-Clamp 6260 3/8″ Alloy Clevis Slip Hook
Working Load Limit: 5,500 lbs Capacity: 7 tons (6,350kg)
Replacement Parts: #62101 Clevis Pin, #62102 Rue Clip
Heat Treated Steel. Made in the U.S.A.
$35.38$44.93Mo-Clamp 6260 3/8″ Alloy Clevis Slip Hook
$35.38$44.93 -
Mo-Clamp 5820 Pinch Weld Brackets – Set of 4
MO-Clamp 5820 Pinch Weld Brackets – Weld-on pinch weld brackets. 12″ brackets for welding to bottom of automobiles without pinch welds. Works with most pinch weld holding systems. Allows for hook-up to a frame rack or hold-down system.
Overall Length: 12″ (305mm) Capacity: 2 tons (1,814kg) Heat Treated Steel. Made in the U.S.A.
$108.08$158.36Mo-Clamp 5820 Pinch Weld Brackets – Set of 4
$108.08$158.36 -
Mo-Clamp 210060 Replacement Horizontal Bracket
MO-Clamp 210060 Replacement Horizontal Bracket
$87.14$118.56Mo-Clamp 210060 Replacement Horizontal Bracket
$87.14$118.56 -
Mo-Clamp 0050 A Clamp
MO-Clamp The A Clamp 0050 grips narrow seams and ridges. Hardened steel cross-hatch teeth assure a secure pull. Excellent for use with slide hammer. Clamp has raised “bolt stoppers” to hold bolts stationary, for easy, one-handed tightening. Use only with ¼” chain.
$123.51$180.97Mo-Clamp 0050 A Clamp
$123.51$180.97 -
Mo-Clamp 4041 Male Clamp Jaw with Nut, Bolt, Spring, and Washer for MO-4025
MO-Clamp 4041 Male Clamp Jaw with Nut, Bolt, Spring, and Washer for MO-4025
$102.11$138.93 -
Mo-Clamp 4018 Mercedes Anchoring Adapters
MO-Clamp 4018 Mercedes Anchoring Adapters – For holding vehicles with Mercedes-type jack tube holes. Jack pin adapters provided for early and late models (two different sizes).
Overall Length: 14″ (356 mm) Capacity: 6 tons (5,443 kg) Replacement Parts: #5249 Nut, Bolt & Washer, #401805 Small Pin, #401804 Large Pin Heat Treated Steel. Made in the U.S.A.
$1,351.92$2,027.63Mo-Clamp 4018 Mercedes Anchoring Adapters
$1,351.92$2,027.63 -
Mo-Clamp 6220 3/8″ Super Alloy Clevis Grab Hook
MO-Clamp 6220 3/8″ Super Alloy Clevis Grab Hook
$77.59$105.57Mo-Clamp 6220 3/8″ Super Alloy Clevis Grab Hook
$77.59$105.57 -
Mo-Clamp 5035 Small Blank Tool Board
MO-Clamp 5035 Small Blank Tool Board – Keep your tools organized! Design your own tool board and order hooks from Mo-Clamp. 24″x24″. Does NOT include hooks!
$68.80$93.60Mo-Clamp 5035 Small Blank Tool Board
$68.80$93.60
