-
Zinko ZRH-206 20ton 6″ Stroke Hollow Ram
Zinko ZRH-206 20 Ton 6″ Stroke Hollow Ram- Design for use in a variety of applications where lifting, pushing, bending or holding may be required.
High-strength alloy steel construction. Chrome-plated piston rods resist wear and corrosion. Special bearing design helps prevent galling for long life and trouble-free performance. Polyurethane seals and wipers to reduce contamination, extending cylinder life. Hardened saddles keep top bearing and plunger from jamming. Saddle grooves help prevent slipping. Heavy-duty spring enables consistent fast plunger retraction. All models come with fast-flow quick-connection coupler and dust cap. May be used in any position. Hollow plunger design allows for both pull and push forces.
Country of Origin: TaiwanMin Ht. 12.05″
$1,263.29$1,443.75Zinko ZRH-206 20ton 6″ Stroke Hollow Ram
$1,263.29$1,443.75 -
Zinko ZR-504A 50ton 4.25″ Stroke Aluminum Single Acting Cylinder
Zinko Aluminum Cylinder is easily carried around and connected to work with any 10,000 psi air over hydraulic pump. These lightweight and rugged cylinders are suitable for almost every heavy lifting situation, in the shop or on the job site.
Special Features:
All models come with 3/8″ NPT fast-flow quick-connection couplers and dust caps.
Made of the strongest aluminum alloys and heat-treated to provide a maximum combination of strength and fracture resistance.
Grooved saddles for stability.
Steel base-plated for increased durability.
Optional valve to control cylinder speed can also be used as shut off valve for temporary load holding.
Optional aluminum base provides extra support and stability for the 50 ton cylinders.More Information
Capacity (Tons) :50
Stroke (in) :4.25
Oil Capacity (in³) :43
Minimum Height (in) :9.29
Maximum Heights (in) :13.22
Outside Diameter (in) :5.11
Cylinder Bore Diameter (in) :3.74
Plunger Diameter (in) :3.15
Base to Adv. Port (in) :1.18
Saddle Diameter (in) :1.96
Weight (lbs) :29.000000$1,271.37$1,452.99Zinko ZR-504A 50ton 4.25″ Stroke Aluminum Single Acting Cylinder
$1,271.37$1,452.99 -
Mo-Clamp 4018 Mercedes Anchoring Adapters
MO-Clamp 4018 Mercedes Anchoring Adapters – For holding vehicles with Mercedes-type jack tube holes. Jack pin adapters provided for early and late models (two different sizes).
Overall Length: 14″ (356 mm) Capacity: 6 tons (5,443 kg) Replacement Parts: #5249 Nut, Bolt & Washer, #401805 Small Pin, #401804 Large Pin Heat Treated Steel. Made in the U.S.A.
$1,351.92$2,027.63Mo-Clamp 4018 Mercedes Anchoring Adapters
$1,351.92$2,027.63 -
Dentfix DF-595II Hammer Head Removal System
Dent Fix DF-595II Hammer Head Dent Removal System –
Replace your stud welder with the 110 volt DF-595ii HammerHead. Same great quality, same essential accessories that provides the technician with the means to higher productivity and better results. It’s like having sticky fingers and being able to pull dent with your hand.
110 Volt
1 year warranty.
60Lbs
Formerly Know as Shark 2 Dent remover (Name changed by Manufacturer)
Included Items:
Weld pin Tip (1), Washer Tip (1), Shrink Tip (1), Wiggle Wire Tip (1), Short Pull Rod (1), Slide Hammer With Rod and Weight (1), Leverage Rod (1), Ground Magnet (1), # Finger Claw, & 1Pound of Wiggle WireMade in China. 1 year warranty. Use with a 30 amp breaker.
$1,396.34$1,586.75Dentfix DF-595II Hammer Head Removal System
$1,396.34$1,586.75 -
Body Buggy Chassis Roller – 4′
Body Buggy Chassis Roller – 4′ – Quick and safe method to transport disabled vehicles on and off a rack and around the shop or into a paint booth. MADE IN THE USA!
After a simple five minute installation, the unit becomes “part of the vehicle”, negating the need to employ any unstable or dangerous lift points. The included spacer kit allows for the use of original fasteners, alleviating the need for any additional fastener inventory. When installed, the vehicle is easily rolled onto a frame rack, into a paint booth or to storage, out of the way of production. The device can be installed on the front or rear of most any vehicle using the cradle or sub-frame mounting points and hardware. The Body Buggy has a max weight rating of 4,500 lbs and includes a 5 year warranty.
INCLUDED: Main Beam (4 Foot), Wheel Assemblies, Sliding Lock Collars, Mounting Brackets (2 Pairs of different heights), Hitch Pins & Clips, Fitment Pin Spacer, Storage Crate, and 10 pc Spacer Kit.
Free up Rack Space with the patented Body Buggy DF-BB104
$1,407.69$1,599.65Body Buggy Chassis Roller – 4′
$1,407.69$1,599.65 -
Mo-Clamp 5010 #1 Tool Board
MO-Clamp 5010 #1 Tool Board with Tools Including:
- #0100 B Clamp
- #0200 C Clamp
- #0300 JR Clamp
- #0400 W Clamp
- 2- #1200 Twin Pull
- #1300 Sill Hook
- #1800 Track Hook
- #5011 Tool Board with Hooks
#5011 Toolboard Dimensions: 2’x2′ Tools are Heat Treated Steel and Made in the U.S.A
$1,418.79$2,127.92Mo-Clamp 5010 #1 Tool Board
$1,418.79$2,127.92 -
Body Buggy Chassis Roller – 5′
Body Buggy Chassis Roller – 5′ – Quick and safe method to transport disabled vehicles on and off a rack and around the shop or into a paint booth. MADE IN THE USA!
After a simple five minute installation, the unit becomes “part of the vehicle”, negating the need to employ any unstable or dangerous lift points. The included spacer kit allows for the use of original fasteners, alleviating the need for any additional fastener inventory. When installed, the vehicle is easily rolled onto a frame rack, into a paint booth or to storage, out of the way of production. The device can be installed on the front or rear of most any vehicle using the cradle or sub-frame mounting points and hardware. The Body Buggy has a max weight rating of 4,500 lbs and includes a 5 year warranty.
INCLUDED: Main Beam (5 Foot), Wheel Assemblies, Sliding Lock Collars, Mounting Brackets (2 Pairs of different heights), Hitch Pins & Clips, Fitment Pin Spacer, Storage Crate, and 10 pc Spacer Kit.
Free up Rack Space with the patented Body Buggy DF-BB105
$1,501.86$1,706.65Body Buggy Chassis Roller – 5′
$1,501.86$1,706.65 -
Zinko ZJJ-1513 15ton 5″ Stroke Journal Mechanical Jack
15 Ton 4.92″ Stroke Journal Mechcanical Jack- Beveled gear construction combines the precision forging pinion to provide shifted tooth form, strong and excellent interlocking.
Special Features:
Unique construction bearing is made for longer life and smooth horizontal advance.
Rigidly designed screw made by chrome -molybdenum steel to withstand excessive load.
Beveled ring gear interlocks with the precision forged pinion to provide shifted tooth form for strong and excellent interlocking.
Special ratchet handle interior design with nickel-chrome wheel and plunger enables strong rotation for an easy , smooth operation.
Buttress threads will not creep down under load.
Operable vertically or laterally (lateral movement requires optional traversing bed).Country of Origin: Japan
More Information
Capacity (Tons) :15
Stroke (in) :4.92
Operation Force (Ft. / lb.) :310
Minimum Height (in) :10.04
Maximum Heights (in) :14.96
Saddle Diameter (in) :2.48
Base Diameter (in) :3.03
Weight (lbs) :40.000000$1,505.23$1,720.26Zinko ZJJ-1513 15ton 5″ Stroke Journal Mechanical Jack
$1,505.23$1,720.26 -
Mo-Clamp 4028 BMW Hold Down
MO-Clamp 4028 BMW Hold Down – For holding BMW vehicles with oblong or round jack tube holes.
Overall Length: 14″ (356 mm) Capacity: 6 tons (5,443 kg) Replacement Parts: #5249 Nut, Bolt & Washer, #402801 Rocker Pin Heat Treated Steel. Made in the U.S.A.
$1,515.76$2,273.36Mo-Clamp 4028 BMW Hold Down
$1,515.76$2,273.36 -
Zinko ZASJ-50M 5ton Air Hydraulic Service Jack
Easy to operate push-button floor jack with an air pump. Ideal for use in tight spaces including on trucks, automotive and agricultural equipment.
Special Features:
The jack can be operated either manually or pneumatically.
Overall construction of selected steel frame, full swivel rear caster wheels and large lifting saddle provide easy positioning and enable these jacks to safely lift to their rated capacities.
Quick lift foot pump can easily lift the jack saddle to the loading point.
Pneumatic operation requires air pressure ranges from 90 to 140 psi operated by a push button for quick lift.
Push button control unit can be easily removed from the handle enabling operator to view the load from various angles.
Large release knob provides metered release control.
Extra long low chassis reaches under low overhangs for easy load positioning.Country of Origin: Japan
More Information
Capacity (Tons) :5
Minimum Height (in) :5.90
Hydraulic Lift (in) :16.14
Maximum Heights (in) :22.04
Chassis Length (in) :55.70
Chassis Width (in) :15.15
Height of Frame (in) :7.87
Operating (psi) :116-145
Weight (lbs) :280.000000$1,531.95$1,750.80Zinko ZASJ-50M 5ton Air Hydraulic Service Jack
$1,531.95$1,750.80 -
Mo-Clamp 4015 Frame Rack Jaws with Angle Bracket
MO-Clamp 4015 Frame Rack Jaws with Angle Bracket – Will hold down cars with horizontal pinch welds including Honda 1990 and up. Angles can be drilled to fit frame racks, benches, etc. Includes two #4044 1/2 ” Shackles.
Gripping Surface: 13″ wide (330mm) Overall Length: 6″ (406mm) Capacity: 6 tons (5,443kg) Replacement Parts: #5200 Nut, Bolt and washer, 840076 spring #4016 Frame rail angle bracket (1 only) Heat Treated Steel. Made in the U.S.A.
$1,672.60$2,508.58Mo-Clamp 4015 Frame Rack Jaws with Angle Bracket
$1,672.60$2,508.58 -
Dentfix DF-SPR/BRAD Blind Rivet Adapter
Dent Fix Equipments SPR Riveters can install blind rivets with the addition of the Blind Rivet Adapter (DF-SPR/BRAD).
The Blind Rivet Adapter is compatible with the SPR Riveter (DF-SPR67) and Push Pull Riveter (DF-SPR69).
A flexible neck allows for the tool to be positioned into hard to reach areas.
The adapter allows the setting of blind rivets with diameters from 4.0 to 7.8 mm for aluminum and 4.0 to 6.4 mm for steel. It has a tensile force is 20 kN.
Both Riveters Sold Separately
$1,891.39$2,149.31Dentfix DF-SPR/BRAD Blind Rivet Adapter
$1,891.39$2,149.31
