Replacement American Freedom MAXX frame machine hydraulic pump, this is the original pump that was used by the manufacture and is a plug and play with no modifications required. This is for machines that have 12,000 lbs. lifting capacity. (will not recommended for 9,000 lbs lift machines).

• Replacement American Freedom MAXX frame machine
• Pump is for machines with 12,000 lbs. lift capacity
• Pump is original pump used by the manufacture
• Manufactured by SPX / Power Team and is made in USA
• 10,000 psi ump pressure for 10-ton frame machines
• 110/115V – 20 amp
• Includes up & down switch w/ 25′ cord
• Oil does not ship with this item (use AW46 hydraulic oil from your local vendor)
• Please verify availability before purchasing – may have lead time for delivery
• Pump uses AW46 hydraulic oil
• Draws 25 amps at full load
• 110/115 VAC 50/60 Hz; Single Phase

NOTE #1: Do not use tractor hydraulic oil. Use hydraulic jack oil AW46 only!

NOTE #2: This pump is for 12,000 lbs. lifting machines only ( not recommended for 9,000 lbs machines)

NOTE #3: If you have any questions contact prior to purchase

Replacement Blackhawk Frame machine power pro SL 3000 HD  hydraulic pump, this is the original pump that was used by the manufacture and is a plug and play with no modifications required. This is for machines that have 12,000 lbs. lifting capacity, 110/115-volt.

• Replacement Blackhawk SL 3000 HD hydraulic pump
• This pump is for 12,000 lbs. lifting machines only!
• Pump is original pump used by the manufacture
• Manufactured by SPX / Power Team and is made in USA
• 10,000 psi ump pressure for 10-ton frame machines
• 110/115V – 20 amp
• Includes up & down switch w/ 25′ cord
• Oil does not ship with this item (use AW46 hydraulic oil from your local vendor)
• Please verify availability before purchasing – may have lead time for delivery
• Pump uses AW46 hydraulic oil
• Draws 25 amps at full load
• 110/115 VAC 50/60 Hz; Single Phase
• Free shipping

NOTE #1: Do not use tractor hydraulic oil. Use hydraulic jack oil AW46 only!

NOTE #2: This pump is not recommended for the 9,000 lbs. lifting blackhawk machines

NOTE #3: If you have any questions contact prior to purchase

This is the original pump used for the chief EZ Liner II Frame machines, works with the 5 Ton towers that are on your Chief EZ liner II Frame machine. This pump will fit directly into your frame machine pedestal and includes the original steel shaved reservoir tank. This is the same OEM pump that chief used in the original EZ liner II and is manufactured in the USA, this is the same pump as the original Chief pump # 690515. The Up & Down switch is the same as the original and is plug and play and is included with purchase.

• Pump is the original OEM pump used by chief part # 690515
• Works on Chief Ez Liner II frame machine
• Work on Chief Classic frame machine
• Pump is equipped with the original steel shaved reservoir tank
• Pump is manufactured by Power Team / SPX
• 5 Ton pulling power
• Includes Up & Down switch (plug and play)
• Oil does not ship with this pump (use AW46 Hydraulic oil from your local vendor)
• See all photos for more information
• Free Shipping

NOTE # 1.  This pump will fit into your pedestal with no modifications needed

NOTE # 2.  If you have questions call be purchasing

NOTE # 3.  This pump will NOT work on LARGE S-21 Frame machines

NOTE # 4.  NOTE: Do not use tractor hydraulic oil

Please contact us if you have any question prior to purchase

Other notes

This is the original chief EZ liner II frame machine pump part # 690515

Specifications

• 1/2 HP for single acting Cylinders
• 110/115V – 50/60 HZ
• 10A – 1 Phase
• Max 3450 rpm – with Solenoid
• 2 Gallon Welded & shaved side reservoir or (462in3)
• Shipping weight 72 lbs
• Max 10,000 psi
• AW-46 Hydraulic Oil

UPC: 3503634122126

Replacement Chief Style Frame Anchoring Stands – Generation 3: Elevate Your Frame Machine Performance

Upgrade your frame machine to the next level of precision and compatibility with our state-of-the-art Replacement Chief Style Frame Anchoring Stands – Generation 3. Crafted to meet the highest standards, these stands are comparable to Chief 3rd Generation clamps (p/n 702083), delivering seamless integration and unparalleled performance.

Key Features:

1. Versatile Compatibility: Our Replacement Chief Style Frame Anchoring Stands – Generation 3 are engineered to work effortlessly with a wide range of frame machines, including Chief S-21 & S-21M, EZ-Liner II, Classic & EZ 25, Goliath, Impulse, Impulse E-VHT, Stream Liner, Excelerator, Chisum, Freedom, Signature, and Proline Frame systems. Enjoy the flexibility of upgrading from the old style system without any modifications.
2. Universal Anchoring Stand Metric Package: The set includes four anchoring stand assemblies, providing you with the perfect solution for your frame machine. Each package is designed to ensure a precise fit and reliable performance.
3. High-Quality Construction: With a powder coat finish, our Replacement Chief Style Frame Anchoring Stands – Generation 3 offer excellent durability and resistance to wear and tear, ensuring a lasting investment for your frame machine.
4. Complete Bolts Kit: The package includes new bolts and metric fastener bars, further streamlining the installation process and enabling seamless compatibility with your frame machine.
5. Non-OEM Aftermarket Excellence: As a non-OEM aftermarket replacement part, our stands deliver the same level of quality and performance as the original Chief 3rd Generation clamps (p/n 702083), ensuring your frame machine maintains peak performance.
6. Convenient Free Shipping: We take care of your convenience by offering free shipping on this product, making sure it reaches your commercial address efficiently.

Upgrade Your Frame Machine Today!

Take advantage of our Replacement Chief Style Frame Anchoring Stands – Generation 3 to elevate your frame machine’s performance to new heights. Enhance your productivity and achieve precise results for a wide range of frame machines.

For any inquiries or assistance in selecting the correct anchoring package for your rack, please don’t hesitate to contact us. We are here to help.

• Set of 4 Anchoring stand assemblies
• Compare To and Replaces Chief p/n 702083
• Works on Chief S-21 & S-21M
• Works on Chief EZ-Liner II, Classic & EZ 25
• Works on Chief Goliath, Impulse, Impulse E-VHT
• Works on Chief Stream Liner, Excelerator
• Works on Chisum, Freedom, Signature, Proline Frame system
• Includes New Bolts Kit
• Includes (4) 5 1/4 inch Metric Bolts
• Includes (4) Metric Fastener Bars
• Powder Coat Finish
• Includes Free Shipping
• Shipping Weight 365 lbs

This item ships by LTL (TRUCK) – We do not deliver this item to residential addresses – Deliveries will be to commercial address only.

Replacement Chief Frame Machine Tall Anchoring Stands: Elevate Your Vehicle Repair Capabilities

Upgrade your existing Chief Frame Machine with our cutting-edge Replacement Tall Anchoring Stands, designed to enhance your vehicle repair operations with precision and efficiency. These stands extend the height, providing you with an additional 4 inches, allowing easy access to high-lift vehicles and facilitating seamless repairs.

Key Features:

1. Height Extension: Our Replacement Chief Frame Machine Tall Anchoring Stands effectively elevate the height of your existing stands, empowering you to handle high lift vehicles with ease. Say goodbye to accessibility challenges and welcome a new level of versatility to your repair process.
2. Superior Compatibility: Engineered as a perfect replacement for Chief part # 702066, our stands are fully compatible with a range of Chief Frame Machine models, including S-21 & S-21M, EZ-Liner II, Classic & EZ 25, Goliath, Impulse, Impulse E-VHT, Stream Liner, Excelerator, Tital, Fuzion, Signature, Freedom, Grabber ProLiner, Maxima, and Chisum.
3. Non-OEM Aftermarket Solution: Our Replacement Chief Frame Machine Tall Anchoring Stands are expertly crafted as a non-OEM aftermarket alternative, guaranteeing the same high-quality performance as the original part. This makes it a reliable and cost-effective choice for your repair needs.
4. Interchangeable Replacement Parts: Every detail matters in vehicle repair, and our stands feature interchangeable parts that align perfectly with Chief p/n 702066, ensuring seamless integration into your existing setup.
5. Free Shipping: To make your experience even more rewarding, we offer free shipping on this product, delivering it straight to your commercial address via LTL (Truck Liner). Please note that residential delivery is not available.

Upgrade Your Repair Capabilities Today!

Experience unmatched precision, reach, and compatibility with our Replacement Chief Frame Machine Tall Anchoring Stands. Take your vehicle repair capabilities to new heights and tackle high lift vehicles with confidence.

Replacement Chief Frame Machine Tall Anchoring Stands, sands extend the height to your existing Stands and will allow you to reach high lift vehicles, these stands will give you 4 additional inches, Compare to Chief part # 702066

• Compare To and Replaces Chief p/n 702066 (set of 4 )
• Works on Chief S-21 & S-21M
• Works on Chief EZ-Liner II, Classic & EZ 25
• Works on Chief Goliath, Impulse, Impulse E-VHT
• Works on Chief Stream Liner, Excelerator
• Works on Chief Tital, Fuzion
• Works on Signature , Freedom
• Works on Grabber ProLiner,
• Works on Maxima and Chisum
• Replacement Parts Interchangeable with Chief p/n 702066
• FREE SHIPPING

Replacement Chief T-Top Bar Adapter Tube, Generation 3: Elevate Your Frame Machine Performance

Upgrade your frame repair capabilities with our high-performance Replacement Chief T-Top Bar Adapter Tube, Generation 3. Crafted to perfection, this Generation 3 clamp seamlessly interchanges with older style stands, enabling you to enhance your older frame machine effortlessly. Compare to Chief part # 505281, this set of 4 stands is designed to deliver exceptional gripping power and compatibility, ensuring precise and efficient frame repairs.

Key Features:

1. Advanced Generation 3 Design: Our Replacement Chief T-Top Bar Adapter Tube is a Generation 3 clamp, meticulously engineered to meet the highest standards of frame repair. Experience superior gripping and holding capabilities for flawless repairs.
2. Seamless Interchangeability: Upgrade your older style stands with ease by simply adding these Generation 3 stands to your older frame machine. Embrace the versatility and improved performance brought by this essential upgrade.
3. Versatile Compatibility: This T-Top Bar Adapter Tube is designed to work effortlessly with Chief Frame machine anchoring packages, including S-21, Classic, Ez-Liner II & Standard, as well as Continental Frame machines. Enjoy compatibility across multiple frame machines.
4. Complete Set of 4: The package includes a set of 4 stands, ensuring you have all you need for a comprehensive upgrade to your frame machine.
5. Replaces Chief Part # 508281-B: Our Replacement Chief T-Top Bar Adapter Tube is a perfect replacement for Chief part # 508281-B, guaranteeing seamless integration and performance.
6. Non-OEM Aftermarket Excellence: As a non-OEM aftermarket replacement part, our T-Top Bar Adapter Tube offers the same level of quality and performance as the original, providing you with a reliable and cost-effective solution.
7. 100% Money Back Satisfaction Guarantee: Your satisfaction is our top priority. We offer a 100% money-back satisfaction guarantee, ensuring your confidence in our product.

Elevate Your Frame Machine Today!

Enhance your frame repair capabilities with our Replacement Chief T-Top Bar Adapter Tube, Generation 3. With impeccable gripping power and seamless compatibility, this adapter tube set empowers you to achieve precise and efficient frame repairs.

Upgrade your frame machine and experience elevated performance with our Replacement Chief T-Top Bar Adapter Tube, Generation 3 – your key to exceptional frame repairs!

• Replaces and Compares to Chief part # 508281-B
• Works on Chief Frame machine anchoring package
• Works with S-21, Classic, Ez- Liner II & Standard
• Works with Continental Frame machines
• Price is for Set of 4
  
• Item arrives as pictured

This is a Non-OEM, Aftermarket, Replacement Part That Replaces Original

100% Money Back Satisfaction Guarantee!