-
Replacement Chief S21M Frame Machine Pendant Switch Assembly
Replacement Chief S21M Frame Machine Pendant Switch Assembly
This Chief Frame machine up & down pendant switch assembly is Pre-Wired and ready for installation, Works with Chief S21M, Impulse and some titan frame machines, compare this to chief part # IT601204
- New in Box – Yellow Control Pendant 2 button With Emergency Stop
- 14 Gauge 30 foot Cable
- Up & Down Switch
- Replacement for S21M & Impulse Frame Machines
- Compares to and replaces Chief p/n IT601204
- Includes Cable & Switch
- FREE SHIPPING
This is a Non-OEM, Aftermarket, Replacement Part That Replaces Original.
100% satisfaction guaranteed, meets or exceed expectations of OEM item.$523.82$707.16Replacement Chief S21M Frame Machine Pendant Switch Assembly
$523.82$707.16 -
The Rail Saver RS120-16AK – with Pump, 6′ Hose, Ram, and Accessory Kit, Case & Wall Bracket
The Rail Saver RS120-16AK – with Pump, 6′ Hose, Ram, and Accessory Kit
New: Now includes Wall Bracket and Storage Case
-
Repairs side members and frame rails fast from the inside out
-
NO heating necessary
-
Don’t spend time drilling and cutting access holes only to weld them back together
-
4 tons surface pressure with 1.2″ expansion
-
Repairs rails up to 27″ deep
-
Precision frame rail and side member repair
-
Increases repair accessibilty
-
Superb metal finishing capabilities
-
Convex dollies to avoid protrusions
-
“Lean” storage system with a case and wall mount bracket
-
Pays for itself within a couple of uses especially if you save a vehicle from total loss
Reduce Cycle Times Repair More Cars Improved Repair Technique
1-1/2″ – 16 Threaded Ram Receiver 1½” X 3″ surface pressure with 1 3/8 travel
36lbs$529.00$669.00 -
-
Replacement Chief Frame Machine Tower Chain 1/2″ For S-21
Replacement Chief Frame Machine Tower Chain 1/2″ For S-21 and Signature Machines , this is a heavy duty chain with a large welded hook and Compares to Chief p/n 602870
- This Chain has a large welded Hook
- 1/2″ Tower Chain Compare to p/n 602870
- 14 Foot
- Works With, S-21 & Standard Frame machines
- Price is for 1 Each
- 100% Guarantee satisfaction
This is a Non-OEM, Aftermarket, Replacement Parts That Replaces Originals
$538.56$619.34Replacement Chief Frame Machine Tower Chain 1/2″ For S-21
$538.56$619.34 -
Replacement Chief EZ-liner II Frame Machine Lift Ram
Replacement Chief EZ-liner II Frame Machine Lift Ram, This works with your EZ liner II and Classic frame machine, Easy to install and replaces chief ram # 685610
- Replaces and Compares to Chief p/n 685610
- Works On Chief Ez-Liner II & Classis Lift Ram
- Works On Chief S-21 Lift Ram
- Works on Signature Frame machine Lift Ram (on single or dual systems)
- Also works with the Tower rams for all machines listed above
- Replaces Chief 8 1/2 ton ram
- FREE GROUND SHIPPING
This is a Non-OEM, Aftermarket, Replacement Part That Replaces Original
18lbs$561.09$789.75Replacement Chief EZ-liner II Frame Machine Lift Ram
$561.09$789.75 -
Replacement Chief Frame Machine EZ liner Tower Collar Assembly
Replacement Chief Frame Machine EZ liner Tower Collar Assembly, This tower Collar compares to Chief part # 690793 and includes Chin Roller and locking knob, (3/8 Chain is sold Separately) , This will work wit EZ liner ii, Classic and auxiliary tower for S21 frame machines
- Replacement 3/8″ Tower Chain pulling Collar For the Following Systems:
- Replaces and compares to Chief p/n 690793
- Works w/ Chief EZ-Liner I
- Works w/ Chief Calssic
- Works w/ Signature Auxiliary Tower
- Works w/ Chief S-21 Auxiliary Tower
- Made of Cast On Piece
- Made In USA
- For Use with 3/8 Tower Chain (MO-6013 Not Included)
- Weight 30 Lbs
- PLEASE SPECIFY Color Preference: White, red, gray, blue
This is a Non-OEM, Aftermarket, Replacement Part That Replaces Original
$582.28$786.07 -
Replacement S21 Chief Frame Machine Lift Ram 10″ Stroke, 10 Ton Ram
Replacement S21 Chief Frame Machine Lift Ram 10″ Stroke, 10 Ton Ram, this is comparable to the Chief OEM 601520 part # and requires no Modification for installation.
- Replaces and compare to Chief p/n 602378
- Works On Chief S-21 Lift Ram
- Also works on Signature Frame machine Lift Ram (on single or dual systems)
- 10 Ton Hydrualic lift rma cylinder
- 10,000 psi working pressure
- Includes hydraulic coupler and threaded adapter
- FREE SHIPPING
This is a Non-OEM, Aftermarket, Replacement Part That Replaces Original
Compare to Chief part # 602378
$585.00$789.75 -
Signature Frame Machine Lift Ram 10″ Stroke, 10 Ton Ram
Replacement signature Frame Machine Lift Ram 10 Ton Ram, this is a 10″ Stroke cylinder with 10,000 psi working pressure, and is a plug and play replacement, and no modifications are required. This ram will work with signature frame machine with single and dual rams (uses same ram) and includes threaded ram coupler and hydraulic coupler.
- Works with Signature frame machine w/dual lift rams
- Works with Signature frame machine w/single lift rams
- Works with Signature Hybrids frame machine w/dual lift rams
- 10 Ton ram lift capability (per cylinder)
- 10,000 psi working pressure
- Includes hydraulic coupler (is not used on some models)
- Includes top threaded coupler
- Comes with threaded ram end
- Plug & Play no modifications needed
- 100% satisfaction guaranty
- FREE SHIPPING
$585.06$672.82Signature Frame Machine Lift Ram 10″ Stroke, 10 Ton Ram
$585.06$672.82 -
Replacement Chief Anchoring Bolt Kit For the FAST System
Replacement Chief Anchoring Bolt Kit for the FAST anchoring package, This bolt kit exceeds manufactures specifications (10.9 Grade), Compare to and replaces chief Kit # 539001, These bolts will exceed the ware-ability of the manufactures originals and we sell them at a lower cost you save 45 percent.
- Bolt Kit For Chief F.A.S.T. anchoring package
- Compare to and replaces chief Kit # 539001
- 10.9 grade bolts that exceed manufactures specification
- See Pictures for Quantity and Bolt Counts
- FREE SHIPPING
This is a Non OEM bolts that Replaces the originals
$594.40$687.84Replacement Chief Anchoring Bolt Kit For the FAST System
$594.40$687.84 -
OTC 4104A Single-Acting, Spring-Return Ram, 10T, 6-1/8″ Stroke
OTC 4104A 10-Ton Single-Acting, Spring-Return Ram with Half Coupler – 6-1/8″ Stroke – OTC’s design ensures positive, leak-resistant sealing throughout all pressure ranges, yet full piston return characteristics are maintained. Additional bearing surface has been designed into these units to effectively resist the punishing stress exerted by off-center loads. Depending on capacity, this ram can handle a variety of bending and straightening jobs, construction maintenance applications, pressing operations, body and frame straightening, and rear housing and axle correction.
$609.41$700.83 -
American Freedom Frame Machine Tower Ram Cylinder
American Freedom Frame Machine 10 ton tower ram with 10″ stroke and 10.000 psi working pressure.This is a plug and play replacement, and no modifications are required. This ram will work for all of the American Freedom frame machine towers. Ram includes the Threaded male adapter and hydraulic fitting (coupler and fitting are with ram coupler s may vary due to manfacture date.)
- Works with American Freedom frame machine Towers
- Works with American Freedom GT frame machine Towers
- Works with American Freedom GT MAXX frame machine Towers
- Works with American Freedom Tilt Frame machine Towers
- Works with all american freedoms made in USA
- 10 Ton ram pressure
- 10,000 psi working pressure
- Includes hydraulic coupler (is not used on some models)
- Includes top threaded coupler (is not used on some models)
- Comes with threaded ram end (is not used on some models)
- Plug & Play no modifications needed
- 100% satisfaction Guatantee
$629.06$672.82American Freedom Frame Machine Tower Ram Cylinder
$629.06$672.82 -
Replacement Chief Frame Machine Pendant Switch – Up & Down
Replacement pendant switch for chief phoenix frame machine, control station switch is made by the same manufacture as the original. The switch is a plug and play replacement for chief part # CK130105. This is the switch only (power cord sold separately).
- Chief frame machine pendant switch for phoenix frame machine
- This control station is same as the original (by same manufacture)
- Replaces chief part # CK130105
- For phoenix frame machine only
- This a switch only (does not include cord)
- Item is plug and play (and requires cable wiring see photos)
- No modifications required
- Free ground shipping
$630.00$724.00Replacement Chief Frame Machine Pendant Switch – Up & Down
$630.00$724.00