-
Chief Frame Machine Hydraulic Seal Kit – S21, EZ liner II, Classic
This Seal kit for Chief Frame Machine Towers and Auxiliary Hydraulic rams kit will work with the S21 and EZ-Liner II Towers, auxiliary rams, and S21 Lift ram. This seal kit Contains: (1) U-Cup seal, (1) Steel slip retainer, (1) Steel snap ring, (1) Piston rod wiper and (2) copper compression seals. The 5 & 10 Ton chief frame machines use the same seal kit on tower, and auxiliary rams. This Kit contains the OEM Rubber U-Cup Seal designed for these machines hydraulics.
- Chief EZ Liner II and S21, standard 5 & 10 ton towers
- Star-A-Liner/Cheetah 10 ton tower rams
- 100% satisfaction guarantee
1.) We are the only supplier who provides a steel retainer u-cup with this kit. 50-60% of all Chief rams will need this part.
2.) Note: This Seal kit will not work on the EZ-liner & Classic lift 5 Ton ram seals See part # 685611
3.) Note: Chief has 2 models of the S21, and this kit will not work with S21-M Frame machines
4.) Properly Identify your machine prior to purchase !
5.) If you have question or need assistance please contact us before purchasing
$56.10$75.74 -
Chief Frame Machine Pendant Switch – Down Switch
Replacement Down Switch for a chief phoenix frame machine pendant switch. The rotary selector exact item used in your chief frame machine pendant switch part # CK130105 and is a plug and play component, no modifications necessary, this is your Down Switch selector switch
- Down switch for chief style pendant control switch
- Switch is the letting down of frame machine
- Factory OEM part used by chief
- Works on the chief pendant switch part # CK130105
- Item is plug and play
- No modifications required
- Free ground shipping
$56.00$64.40Chief Frame Machine Pendant Switch – Down Switch
$56.00$64.40 -
Chief Frame Machine Pendant Switch – Lock Release Switch
Replacement lock release switch for a chief phoenix frame machine pendant switch. The rotary selector exact item used in your chief frame machine pendant switch part # CK130105 and is a plug and play component, no modifications necessary, this is your lock release selector switch.
- Lock release Switch for chief style pendant control switch
- Switch is the lock release switch of frame machine
- Factory OEM part used by chief
- Works on the chief pendant switch part # CK130105
- Item is plug and play
- No modifications required
- Free ground shipping
$56.00$64.40 -
Chief Frame Machine Pendant Switch – UP Switch
Replacement Up switch for a chief phoenix frame machine pendant switch. The rotary selector exact item used in your chief frame machine pendant switch part # CK130105 and is a plug and play component, no modifications necessary, this is your Up switch selector switch
- Up switch for chief style pendant control switch
- Switch is the Lifting up of frame machine
- Factory OEM part used by chief
- Works on the chief pendant switch part # CK130105
- Item is plug and play
- No modifications required
- Free ground shipping
$56.00$64.40Chief Frame Machine Pendant Switch – UP Switch
$56.00$64.40 -
Chief Frame Machine Pendant Switch | Up and Down Assembly
Replacement Chief Frame Machine Pendant switch | Up and Down
This chief style Up & Down Pendant switch is a plug and play item. Simply plug in an go. Switch will work with S21, Ez Liner II, Classic, Ez-25, Impulse, Chiusm Signature, Signature and others.
- Chief Style Control Switch – Pendant Switch
- Yellow 14 Gauge 25 foot
- Compare to and replaces Chief p/n 611119
- Works on Chief S-21 & S-21M
- Works on Chief EZ Liner II , Classic, EZ-25,
- Works on Chief Titan, Impulse
- Works on Black Hawk w/ Electric Pump
- Works on Chisum Signature & Freedom
- Works on Kansas Jack Frame Racks w/ Electric Pump
- Works on Maxima W Electric Pump
- Nut Thread Size 7/8-16
- FREE GROUND SHIPPING
This is a Non-OEM, Aftermarket, Replacement Part That Replaces Original
Chief, Switch, Frame machine, S21, EZ liner II
$433.10$584.69Chief Frame Machine Pendant Switch | Up and Down Assembly
$433.10$584.69 -
Chief Frame machine Pinch Weld Clamp Bolt Kit – Generation 3
Chief Pinch Weld Clamp Bolt Service Metric Kit -UAS
Generation 3, G3
- Works on Chief Frame machine anchoring package
- For use with 8 jaw system – Single Bolt
- Bolts Are Grade 8.8 Metric threads
- Works with S-21, Classic, Ez- Liner II & Standard
- Works with Chief Goliath, Excelerator, Impulse, Etc
- Complete Set for all 4 clamps
- SPRINGS SOLD Separately (RP-PWCS-G234)
- Grade 8 Bolts, Nuts & Washers
- Grade 8.8 harden bolts
- Compare to Chief Part # 697737
- GAT-PWC-8-metric
$178.50$205.28Chief Frame machine Pinch Weld Clamp Bolt Kit – Generation 3
$178.50$205.28 -
Chief Frame Machine Pump – 4P Threaded Electrical Socket Connector
This threaded electrical socket if for the original pump used for the chief EZ Liner II Frame machines, and is screwed directly into the pump motor. The wires are the proper color coordinated to the originals (Black, White, Green, Red) … 4P (4 Pin) Threaded socket and will work on S21 and EZ liner II pumps.
- Works with the original S21 hydraulic pumps – 10 Ton
- Works with the original EZ Liner II hydraulic pumps – 5 Ton
- Works with the original EZ Classic hydraulic pumps – 5 Ton
- Note: should be installed by professionals
- Threaded socket with wires only (Pump & Switch sold separately)
$68.71$79.01 -
Chief Impulse EVHT Frame Machine Overload / Level switch
This Chief impulse overload switch and is located at the bottom of your frame machine and replace part chief OEM part# 450956. Our switch is sold as an assembly and includes (1) switch, (1) cover, (2) screws (1) Retainer bracket, and (2) nylon lock nuts. See all photos for the item and it is an exact match for what you will receive. Also know as a level switch
- Replaces Chief Part# 450956
- Includes (1) overload Switch
- Includes (1) overload switch cover
- Includes (2) 1″ screws (use as needed)
- Includes (2) 1-1/8″ screws (use as needed)
- Includes (2) 1-1/4″ screws (use as needed)
- includes (2) nylon lock nuts
- includes (1) retainer bracket
- Some times call a level switch
Note: 3 different lenght of screws provided to address different applications
KW: RP-EVHT-BS100, RP-EVHT-TS100
$68.20$78.43 -
Chief Impulse EVHT Frame Machine Tilt switch
This Chief impulse tilt switch and is located under the deck of your frame machine and replace part chief OEM part# 450444. Our switch is sold as an assembly and includes (1) switch, (1) cover, (2) screws (1) Retainer bracket, and (2) nylon lock nuts. See all photos for the item and it is an exact match for what you will receive.
- Replaces Chief Part#450444
- Includes (1) Tilt Switch
- Includes (1) Tilt switch cover
- Includes (2) 1″ screws (use as needed)
- Includes (2) 1-1/8″ screws (use as needed)
- Includes (2) 1-1/4″ screws (use as needed)
- includes (2) nylon lock nuts
- includes (1) retainer bracket
Note: 3 different lenght of screws provided to address different applications,
$68.20$78.43Chief Impulse EVHT Frame Machine Tilt switch
$68.20$78.43 -
Chief Phoenix Frame Machine lift Ram Seal Kit – Dual Acting
Replacement Chief Phoenix Frame Machine lift Ram Seal Kit, Compare to Chief part # 601090, works with dual acting hydraulics only. please make sure to properly identify the model of you machine before you make a purchase.
- Seal kit for chief Phoenix frame machine lifting ram
- Seal Kit for Chief Dual acting Lift Ram Part # 601193
- Compare seal kit to Chief Part # 601090
- works on S21M only ! Dual acting low pressure
- Free Shipping
Note: This seal kit works with dual acting hydraulic rams, If you are not sure of what you need
please email or text pictures of you machine and ram before purchasing we will he happy to assist
you in getting the correct part. This seal kit will not work with single acting cylinders.This is a Non-OEM, Aftermarket, Replacement part that replaces original part # 601090
$131.25$150.94Chief Phoenix Frame Machine lift Ram Seal Kit – Dual Acting
$131.25$150.94 -
Chief Pinch Weld Clamp Bolt Service Kit -Generation 2
Chief Pinch Weld Clamp Bolt Service Kit -Generation 2, G2
- Works on Chief Frame machine anchoring package
- This is for Generation 2 Style clamps
- For use with 8 jaw system Works with S-21, Classic, Ez- Liner II & Standard
- Bolts for Complete Set for all 4 clamps
- Does NOT include Springs
- Grade 8 Bolts , Nuts & Washers
- USA- Standard Bolts (not Metric)
- GAT-PWC-G2
- Compare to Chief Part # 697736
- Springs SOLD Separately (RP-PWCS-G234)
$176.00$202.40Chief Pinch Weld Clamp Bolt Service Kit -Generation 2
$176.00$202.40 -
Chief Pinch Weld Clamp Bolt Service Kit Generation 1
Chief Pinch Weld Clamp Bolt Service Kit -UAS
This Kit is for generation 1 Clamp Set, This kit is Grade 8 SAE bolts,
Generation 1 – G2
- Works on Chief Frame machine anchoring package
- For use with 16 jaw system
- USA- SAE bolt Standard Sizes
- Works with S-21, Classic, Ez- Liner II & Standard
- Works with Continental Frame machines
- Complete Set for all 4 clamps
- SPRING SOLD Separately see part # (RP-PWCS-G234)
- Grade 8 Bolts, Nuts & Washers
- GAT-PWC-G1
- Compare to Chief Part # 697735
- Shipping weight 13 lbs
$222.75$256.16Chief Pinch Weld Clamp Bolt Service Kit Generation 1
$222.75$256.16
