-
Chief Style Dead Car Dolly, Set of 2
Chief Style Dead Car Dolly, Set of 2, These are chief frame machine style dead card dollies compare to Chief part # 610706
- Compare to and Replaces Chief part # 610706
- Set Of 2
- Dead Car Dolly 2500 lb
- Made in USA
- FREE SHIPPING
This is a Non-OEM, Aftermarket, Replacement Part That Replaces Original
$444.00$599.40Chief Style Dead Car Dolly, Set of 2
$444.00$599.40 -
Chief Style Fastener Plate – Anchoring
Chief Style Fastener Plate – Anchoring, works with all chief frame machines, including S21, Ez Liner II, Classic, Goliath, Streamliner, G-series nad impluse frame machines, compare this to chief part # 607371
- Replaces Chief Part # 607371
- Works on Chief S-21 & S-21M
- Works on Chief EZ Liner II , Classic, EZ-25,
- Works on Chief Titan, Impulse
- Works on Chisum Signature & Freedom
- Works with Both Standard & Metric Bolts Systems
- One Piece Cast Steel
- FREE SHIPPING
This is a Non-OEM, Aftermarket, Replacement Part That Replaces Original
$77.63$104.79Chief Style Fastener Plate – Anchoring
$77.63$104.79 -
Chief Style Tower Ram Flange 3-3/4″
Chief Tower Ram Flange 3-3/4″ Tower Ram
- Tower Ram Flange For Chief 680616
- Item as seen in Photo
- See Flange retro fit kit
- See Photo measurement for comparison and accuracy
Chief parts Reference #680616,602619,770147
The nut included will work with OTC, Power Team, Enerpac and similar style ramsReplacement part and Retro kit not made by chief, We are not a Chief distributor.
If you want to pay OEM prices call your local chief Distributor.$112.50$151.88Chief Style Tower Ram Flange 3-3/4″
$112.50$151.88 -
Chief Style Tower Ram Flange 3-3/4″ Kit w/ Bolt and Washer
Chief Tower Ram Flange 3-3/4″ Kit w/ Bolt and Washer
- Flange , Bolt & Washer 680616
- Tower Ram Flange
- This Kit Will retro to the old style Chiefs
- Item as seen in Photo
- See Photo measurement for comparison and accuracy
Chief parts Reference #680616,602619,770147
The nut included will work with OTC, Power Team, Enerpac and similar style ramsReplacement part and Retro kit not made by chief, We are not a Chief distributor.
If you want to pay OEM prices call your local chief Distributor.Compare to Chief Flange part # change from 680616 to 680617
$143.00$193.05Chief Style Tower Ram Flange 3-3/4″ Kit w/ Bolt and Washer
$143.00$193.05 -
Chief Style Tower Ram Flange 4-3/4″
Chief Tower Ram Flange 4-3/4″ replaces chief part # 601237
- Includes Flange Bolt ( as Shown in picture)
- Kit are available when Necessary to retro fit.
- See Photo measurement for comparison and accuracy
Chief parts Reference # 601236,601237,602619,770147
The nut included will work with OTC, Power Team, Enerpac and similar style ramsReplacement part and Retro kit not made by chief, We are not a Chief distributor.
If you want to pay OEM prices call your local chief Distributor.$120.00$162.00Chief Style Tower Ram Flange 4-3/4″
$120.00$162.00 -
Dowel Pin – Chief S21 Frame machine 3/8 X 1″
Dowel Pin – Chief S21 Frame machine 3/8 X 1″
- S-21 Frame Machine Tower Machine dowel pin 3/8 X 1″ ( pin is for S-21 frame machine with Serial # 708 And Down)
- Dowel is 3/8 X 1″
- Requires one pin per Bearing
- Replaces Chief Part # 602001
Replacement for Chief EzLiner II Frame Machine Tower Roller Bearings (Takes 4 bearings per tower) 1-1/4 Bearings Dowel Pin
This is a Non-OEM, Aftermarket, Replacement Part That Replaces Original
$6.60$8.91Dowel Pin – Chief S21 Frame machine 3/8 X 1″
$6.60$8.91 -
Fastener Bar Bolt Kit – EZ-Liner II
Fastener Bar Bolt Kit
- Works with Chief EZ-II, Classic & EZ-25 frame machines
- Grade 8 harden bolt & washers
- Pkg of 4 (3/4-10NC x 4 1/2)
- Replaces Chief bolt Part # 685265
$68.63$78.92Fastener Bar Bolt Kit – EZ-Liner II
$68.63$78.92 -
Fastener Bar Bolt Kit for Excelerator Metric
Fastener Bar Bolt Kit Excelerator
- Works with Chief Excelerator
- Metric Bolts
- Grade 8 harden Bolts & Washers
- Pkg of 4 Bolt,M20X2.5X110MM Hex w/Washers
- Replaces Chief Bolts p/n 539007
$64.63$74.32Fastener Bar Bolt Kit for Excelerator Metric
$64.63$74.32 -
Fastener Bar Bolt Kit for S-21 Chief
Chief Fastener Bar Bolt Kit S-21
- Works with Chief S-21 & Signatures Frame machines
- Grade 8 harden Bolts & Washers
- Pkg of 4 (3/4″-10NC x 5 1/2)
- Replaces Chief Bolts p/n 620496
$68.63$78.92Fastener Bar Bolt Kit for S-21 Chief
$68.63$78.92 -
Fastener Bar Bolt Kit-Metric- EZ-II -Upgrade only
Fastener Bar Bolt Kit-Metric-Upgrade only
- Works with Chief EZ-II & Classic
- Bolts are used when you have upgraded to Metric Clamp System
- Grade 8 harden Bolts & Washers
- Pkg of 4 Metric Bolt,M20X100MM Hex
(S21M, Titans, Impulse Series) - Note These are Metric Bolts Kits
- For Questions or to Clarify your needs please call us @ 800-435-8543
$61.88$71.16Fastener Bar Bolt Kit-Metric- EZ-II -Upgrade only
$61.88$71.16 -
Fastener Bar Bolt Kit-Metric- Fits Chief Phoenix
The Fastener Bar Bolt Kit is metric threaded bolt kit and works with the Phoenix, Titan, Chief S21-M and Titan Frame machines, also fit the S-21 Frame machines that have been updated to the metric bolt system. we do also offer the bolts SAE (american Standard theads also. Make sure to identify the bolts you need prior to placing order.
Frame
- Works with Chief Phoenix w/ Metric fastener bars
- Works with Chief S-21M w/ Metric fastener bars
- Works with Chief S-21 w/ updat to Metric fastener bars
- Works with Chief Titan w/ Metric fastener bars
- Works with Chief Phoenix w/ Metric fastener bars
- Grade 8 harden Bolts & Washers
- Pkg of 4 Metric Bolt, M20 X 2.5 X 140MM Hex
- Replaces Chief Bolts p/n 539008
- Grade 8
- Note: These are Metric Bolts Kits and are used w/ Metric Fastener Bars
$68.63$78.92Fastener Bar Bolt Kit-Metric- Fits Chief Phoenix
$68.63$78.92 -
Fastener Bar Bolt Kit-Metric- Fits Chief S21 Metric
The Fastener Bar Bolt Kit is metric threaded bolt kit and works with the Chief S21-M, Titan, Phoenix and Titan Frame machines, also fit the S-21 Frame machines that have been updated to the metric bolt system. we do also offer the bolts SAE (american Standard theads also. Make sure to identify the bolts you need prior to placing order.
Frame- Works with Chief S-21M w/ Metric fastener bars
- Works with Chief S-21 w/ updat to Metric fastener bars
- Works with Chief Titan w/ Metric fastener bars
- Works with Chief Phoenix w/ Metric fastener bars
- Grade 8 harden Bolts & Washers
- Pkg of 4 Metric Bolt, M20 X 2.5 X 140MM Hex
- Replaces Chief Bolts p/n 539008
- Grade 8
- Note: These are Metric Bolts Kits and are used w/ Metric Fastener Bars
$68.63$78.92Fastener Bar Bolt Kit-Metric- Fits Chief S21 Metric
$68.63$78.92
