- “Dentfix DF-900DBH 35mm Dead Blow Hammer” already exists in your wishlist
-
Dentfix DF-311 Tram Shortener for DF-3 Tram Gauge
Dentfix DF-311 Tram Shortener for DF-3 Tram Gauge – creates a new measuring point to achieve shorter measurements for the DF-3 Telescoping Tram Gauge
$77.60$103.47Dentfix DF-311 Tram Shortener for DF-3 Tram Gauge
$77.60$103.47 -
Dentfix DF-3DX Digi-Tram Digital Measuring Tram Gauge
DentFix DF-3DX Digi Tram Digital Measuring Tram Gauge – Taking point-to-point measurements from 1’4″ to 11’11” feet (400-3640 mm) the tram user can measure in feet, inches, 1/16”s of an inch and metric measurements with the touch of a button. The zeroing function enables you to take comparison measurements, displaying the appropriate positive or negative reading. Placing the center pointer on the prescribed 400mm mark, measurements shorter than the collapsed length of the tram can be made. Offering our widest measuring range, the “DIGI-TRAM” comes with (3) 350 mm long pointers, (2) 110 mm short pointers, (2) bullet pointers, (2) pointer holders, and (2) cones for zeroing out larger holes all stored in a plastic carrying case. One year manufacturer’s warranty.
$1,147.53$1,530.04Dentfix DF-3DX Digi-Tram Digital Measuring Tram Gauge
$1,147.53$1,530.04 -
Dentfix DF-3S Telescopic Measuring Tram (1′ to 3′) – Made In Switzerland
DentFix DF-3S Telescopic Measuring Tram (1 to 3 foot) – Made in Switzerland – the perfect compliment to the DF-3. Measuring from 1 to 3 feet this tram takes point to point measurements in the range that the DF-3 can”t. It is ideal for use under the hood and in the door jams. Comes with a full compliment of pointers and a nylon carrying bag. When fully closed it is one foot and it will extend up to three feet.
$764.74$1,019.65 -
Dentfix DF-3TC3A Short Telescoping Measuring Tram Gauge (Mechanical) 3 Meters
DentFix DF-3TC3 Short Telescoping Measuring Tram Gauge – Telescopic measuring trams are great for writing estimates or to quickly spot check a frame pull. No need to set up a complicated bench measuring system or mount the car on a rack. With Two 350mm (13.75 Inches) Long pointers.
Extend out only as much tram as is needed. No need to add up sections, the internal tape reads out through a display window. Extruded aluminum sections make this tram light weight yet rigid when fully extended. Measures 28″ to 9′. With Two 350mm (13.75 Inches) Long.$301.98$402.64 -
Dentfix DF-3TC5A Long Telescoping Measuring Tram Gauge (Mechanical) 5 Meters
DentFix DF-3TC5 Long Telescoping Measuring Tram Gauge – Telescopic measuring trams are great for writing estimates or to quickly spot check a frame pull. No need to set up a complicated bench measuring system or mount the car on a rack. With Two 350mm (13.75 Inches) Long pointers.
Extend out only as much tram as is needed. No need to add up sections, the internal tape reads out through a display window. Extruded aluminum sections make this tram light weight yet rigid when fully extended. Measures 41.5″ to 15′ With Two 350mm (13.75 Inches) Long pointers.$395.55$527.40 -
Dentfix DF-3TCAS Accessory Tram Points
Dentfix DF-3TCAS Accessory Tram Points – Measuring solo just got easier with this Tram Gauge Adapter Set.
All cones are self-centering for higher accuracy. No more guessing whether your pointers are centered or not!
The two Cones are for holes up to 40mm.
Four Reverse Cones are for bolts and nuts up to 19mm.
Machined aluminum construction for durability.
Fits the 3 Meter Tram Gauge (DF-3TC3A) and 5 Meter Tram Gauge (DF-3TC5A). Tram gauge sold separately.$84.22$112.29Dentfix DF-3TCAS Accessory Tram Points
$84.22$112.29 -
Dentfix DF-503O On/Off Power Switch for DF-505 Maxi
DENTFIX DF-503O On/Off Power Switch for DF-505 Maxi
$14.38$15.83Dentfix DF-503O On/Off Power Switch for DF-505 Maxi
$14.38$15.83 -
Dentfix DF-503SW Slide Weight for DF-505
DentFix DF-503SW Slide weight to be used with the long rods (DF-503L) from the Maxi 505 Multiple Pull Dent Station 220V and 100V.
$33.65$42.60Dentfix DF-503SW Slide Weight for DF-505
$33.65$42.60 -
Dentfix DF-504 Four Finger Bear Claw
The Dent Fix four-finger claw is ideal for hand pulling creases across a door. The unique finger design allows the deepest part of the panel to be pulled first, creating an even pull. As the damage is relieved, the rest of the fingers start to pull. Over pulling is a thing of the past.
$53.42$68.93Dentfix DF-504 Four Finger Bear Claw
$53.42$68.93 -
Dentfix DF-505/220 Maxi Dent Removal System 220v
DentFix DF-505 Maxi Dent Removal System 220 Volt
MAXI DF-505/220V is a 220 volt single phase
WELD – PULL – TWIST
Provides power needed to shrink, pull rocker panels, hail damage, creases, dents
Increases workers productivity while producing a cleaner, better repair.
Versatile tool will Weld Pins
Weld a slide hammer directly to the panel
Weld a light pulling rod
Weld wiggle wire for even crease pulling
Weld a rod for leverage pulling
Shrink metal
5 Year Warranty
Made in USA
Complete kit includes220 volt unit
two light pulling rods
two slide hammer rods with strike weight
stud pin electrode, shrinking electrode, wiggle wire weld tip
nine and four finger Bear Claw
optional DF-509 rolling cart is available separately.$1,871.44$2,126.63Dentfix DF-505/220 Maxi Dent Removal System 220v
$1,871.44$2,126.63 -
Dentfix DF-505/DXE The MAXI Extended Dent Removal Repair Station 220v
Dentfix DF-505/DXE The MAXI Extended Dent Removal Repair Station 220v
The DF-505/DXE Maxi Extended is the ultimate steel repair station! Every tool you need all in one station that can be rolled to different bays in the shop. A lockable cabinet with foam fitted inserts to keep the tools organized and accounted for.
Complete kit includes
220V The Maxi Single Phase Unit Welder
Lockable 5-Drawer Cart
5-Piece Hammer Set
6-Piece Dolly Set
Body File & Blade
Bridge Puller (DF-505BP)
Maxi Massager (DF-505DM)
9-Finger Bear Claw (DF-506)
4-Finger Bear Claw (DF-504)
Leverage Puller (DF-503L)
Magnetic Key Electrode (DF-503KEM)
Wiggle Wire Sample
Stud Pin Samples
Weld Key Samples
Right Angle Undercoat Remover (DF-701) with brush and eraser wheels
Flexible Fender Puller (DF-HD0140)
Finger Belt Sander (DF-FBS16)
Door Prop Stick (DF-DSP1)
Suction Gun (DF-SG70)
Ring Hammer (DF-903)
Plastic Scrapper (DF-WK20)
Wedge Scrapper Set (DF-609)
Multi-Clip Pliers (DF-625)
Bodyline Marker Tool (DF-BL10A)
Surge Protector (DF-601A)
Safety Glasses (DF-901SG)
Dust Cover (DF-505DXEDC)$5,887.81$6,690.65Dentfix DF-505/DXE The MAXI Extended Dent Removal Repair Station 220v
$5,887.81$6,690.65 -
Dentfix DF-505BP Bridge Puller
The DF-505BP Bridge Puller is a great way for techs to perform controlled panel pulls. The Pull Control Wheel allows the tech to add incremental levels of force and lock the pull in that position.
This bridge puller is able to perform steel or aluminum pulls*
Steel:
When using the DF-505 Maxi System you can pull with wiggle wire or weld keys attached to the panel. For the weld keys you will also need the DF-505KEM Magnetic Key Electrode. Simply weld keys (DF-503KF & DF-503KT) in desired location, connect rod through eyelets in the keys, and attached to the Bridge Puller.Aluminum:
When using an aluminum welder weld M4x12 studs to the panel an attach screw on eyelets to the studs. Install pull rod and bridge puller.*Please note: Working with tools for both steel and aluminum repairs can contaminate the panels affect paint performance, it is best practice not to use on back to back pulls (steel then aluminum, or vice versa) and if you do, thoroughly clean before transferring to another repair. Even better use the tool on one dedicated metal aluminum or steel not both.
$543.56$724.75Dentfix DF-505BP Bridge Puller
$543.56$724.75
