-
DentFix WK20 Plastic Lever Scraper
DentFix WK20 Plastic Lever Scraper- Designed specifically for windshileds this tool has found its way into many other uses. Any time you need a tool that will not scratch soft surfaces. Work on the dash, door panel, remove vents and scrape painted surfaces.
$5.21$6.72DentFix WK20 Plastic Lever Scraper
$5.21$6.72 -
DentFix WK20/10 Package of 10 Winshield Sticks
DentFix WK20/10 Package of 10 Winshield Sticks
$50.77$65.51DentFix WK20/10 Package of 10 Winshield Sticks
$50.77$65.51 -
Dowel Pin – Chief Ez Liner II & S21 (after 708)
Dowel Pin – Chief Ez Liner II & S21 (after 708)
- S-21 & EZ Liner II Frame Machine Tower Machine dowel pin 3/8 X 1″ ( pin is for S-21 frame machine with Serial # 708 And Down)
- Dowel is 5/16″ X 1″
- Requires one pin per Bearing
- Replaces Chief Part # 606109
Replacement for Chief EzLiner II & S21Frame Machine Tower Roller Bearings (Takes 4 bearings per tower) cyr 1-1/8 Bearings Dowel Pin
This is a Non-OEM, Aftermarket, Replacement Part That Replaces Original
$6.60$8.91 -
Dowel Pin – Chief S21 Frame machine 3/8 X 1″
Dowel Pin – Chief S21 Frame machine 3/8 X 1″
- S-21 Frame Machine Tower Machine dowel pin 3/8 X 1″ ( pin is for S-21 frame machine with Serial # 708 And Down)
- Dowel is 3/8 X 1″
- Requires one pin per Bearing
- Replaces Chief Part # 602001
Replacement for Chief EzLiner II Frame Machine Tower Roller Bearings (Takes 4 bearings per tower) 1-1/4 Bearings Dowel Pin
This is a Non-OEM, Aftermarket, Replacement Part That Replaces Original
$6.60$8.91Dowel Pin – Chief S21 Frame machine 3/8 X 1″
$6.60$8.91 -
Extended Handle upgrade for Dentfix Maxi (Handle only)
The DF-505PHXT Extended Handle for The MAXI (sold separately) organizes the power and handle cables out of the way for improved safety and more nimble movement of the unit around the shop. When The MAXI and Extended Handle are combined with the Padded Seat (DF-505MS, sold separately) and Accessory Trays (DF-505AT, sold separately) creates the ultimate ergonomic MAXI with higher work efficiency.
This handle is included with The MAXI EX (DF-505EX220 & DF-505EX110). It is a replacement part for the short handle that comes stock with the original MAXI (DF-505/220V & DF-505/110V).
$92.00$99.00 -
EZ Wheel Chocks – EZ Roller Spinner 2 Pack
This is a 2 Pack of EZ Wheel Chocks, The work with all version and Sizes of the EZ Roller Spinner, Fast and easy to install
- 2 Pack
- Works with both 4/5 Lug and th 5/6 lug version
- Fast and easy to install
- Tap in to install
$0.00 -
Fastener Bar Bolt Kit – EZ-Liner II
Fastener Bar Bolt Kit
- Works with Chief EZ-II, Classic & EZ-25 frame machines
- Grade 8 harden bolt & washers
- Pkg of 4 (3/4-10NC x 4 1/2)
- Replaces Chief bolt Part # 685265
$68.63$78.92Fastener Bar Bolt Kit – EZ-Liner II
$68.63$78.92 -
Fastener Bar Bolt Kit for Excelerator Metric
Fastener Bar Bolt Kit Excelerator
- Works with Chief Excelerator
- Metric Bolts
- Grade 8 harden Bolts & Washers
- Pkg of 4 Bolt,M20X2.5X110MM Hex w/Washers
- Replaces Chief Bolts p/n 539007
$64.63$74.32Fastener Bar Bolt Kit for Excelerator Metric
$64.63$74.32 -
Fastener Bar Bolt Kit for S-21 Chief
Chief Fastener Bar Bolt Kit S-21
- Works with Chief S-21 & Signatures Frame machines
- Grade 8 harden Bolts & Washers
- Pkg of 4 (3/4″-10NC x 5 1/2)
- Replaces Chief Bolts p/n 620496
$68.63$78.92Fastener Bar Bolt Kit for S-21 Chief
$68.63$78.92 -
Fastener Bar Bolt Kit-Metric- EZ-II -Upgrade only
Fastener Bar Bolt Kit-Metric-Upgrade only
- Works with Chief EZ-II & Classic
- Bolts are used when you have upgraded to Metric Clamp System
- Grade 8 harden Bolts & Washers
- Pkg of 4 Metric Bolt,M20X100MM Hex
(S21M, Titans, Impulse Series) - Note These are Metric Bolts Kits
- For Questions or to Clarify your needs please call us @ 800-435-8543
$61.88$71.16Fastener Bar Bolt Kit-Metric- EZ-II -Upgrade only
$61.88$71.16 -
Fastener Bar Bolt Kit-Metric- Fits Chief Phoenix
The Fastener Bar Bolt Kit is metric threaded bolt kit and works with the Phoenix, Titan, Chief S21-M and Titan Frame machines, also fit the S-21 Frame machines that have been updated to the metric bolt system. we do also offer the bolts SAE (american Standard theads also. Make sure to identify the bolts you need prior to placing order.
Frame
- Works with Chief Phoenix w/ Metric fastener bars
- Works with Chief S-21M w/ Metric fastener bars
- Works with Chief S-21 w/ updat to Metric fastener bars
- Works with Chief Titan w/ Metric fastener bars
- Works with Chief Phoenix w/ Metric fastener bars
- Grade 8 harden Bolts & Washers
- Pkg of 4 Metric Bolt, M20 X 2.5 X 140MM Hex
- Replaces Chief Bolts p/n 539008
- Grade 8
- Note: These are Metric Bolts Kits and are used w/ Metric Fastener Bars
$68.63$78.92Fastener Bar Bolt Kit-Metric- Fits Chief Phoenix
$68.63$78.92 -
Fastener Bar Bolt Kit-Metric- Fits Chief S21 Metric
The Fastener Bar Bolt Kit is metric threaded bolt kit and works with the Chief S21-M, Titan, Phoenix and Titan Frame machines, also fit the S-21 Frame machines that have been updated to the metric bolt system. we do also offer the bolts SAE (american Standard theads also. Make sure to identify the bolts you need prior to placing order.
Frame- Works with Chief S-21M w/ Metric fastener bars
- Works with Chief S-21 w/ updat to Metric fastener bars
- Works with Chief Titan w/ Metric fastener bars
- Works with Chief Phoenix w/ Metric fastener bars
- Grade 8 harden Bolts & Washers
- Pkg of 4 Metric Bolt, M20 X 2.5 X 140MM Hex
- Replaces Chief Bolts p/n 539008
- Grade 8
- Note: These are Metric Bolts Kits and are used w/ Metric Fastener Bars
$68.63$78.92Fastener Bar Bolt Kit-Metric- Fits Chief S21 Metric
$68.63$78.92
