-
Mo-Clamp 0802 Pull Plate for Tac-N-Pull 1-1/2″
MO-Clamp 0802 Pull Plate for Tac-N-Pull 1-1/2″
$8.84$11.23Mo-Clamp 0802 Pull Plate for Tac-N-Pull 1-1/2″
$8.84$11.23 -
Mo-Clamp 0804 Pull Plate for Tac-N-Pull 4″
MO-Clamp 0804 Pull Plate for Tac-N-Pull 4″
$12.77$16.22Mo-Clamp 0804 Pull Plate for Tac-N-Pull 4″
$12.77$16.22 -
Mo-Clamp 0805 Pull Plate Kit for Tac-N-Pull
MO-Clamp 0805 Pull Plate Kit for Tac-N-Pull – For hard-to-hold pulls. Tack weld one of the reusable plates. Attach clamp and pull. Break tack weld with a grinding cut-off wheel or cutting torch.
- Ten (10) 1″ Pull Plates
- Five (5) 1-1/2″ Pull Plates
- Five (5) 3″ Pull Plates.
The Pull Plate Kit includes: Ten (10) #0801 1″ Pull Plates Five (5) #0802 1-1/2″ Pull Plates Five (5) of #0803 3″ Pull Plates. For use with the #0800 Tac-N-Pull Clamp. (Clamp not included in kit.) Heat Treated Steel. Made in the U.S.A.
$151.36$205.93Mo-Clamp 0805 Pull Plate Kit for Tac-N-Pull
$151.36$205.93 -
Mo-Clamp 0808 Maxi Tac-N-Pull
MO-Clamp 0808 Maxi Tac-N-Pull – A new tool that is the step up from our old standard, the #0800. This is the big brother for those pulls on creases and bends that demand a heavier pull. Or perhaps a pull that requires some twist to follow the sheet metal out the way it went in. This Tac-N-Pull has all of the finesse given to you by the first tool, #0805, PLUS, you have two more pulling points to add twist to your pull for that final tweak. Use with #1150 Chain Spreader Bar for multiple pulls in a heavily damaged area. These tools will help get more use out of your frame machine. Giving the technician options is what makes Mo-Clamp the best.
Design allows for uneven pulls and getting around obstructions Made of Mo-Clamp Tru-Tuff Steel Alloy Covered by the Mo-Clamp forever warranty Can use all 5 sizes of different pull plates in whatever combination necessary Comes with 2 – 4″ pull plates (0804) and 2 – 6″ pull plates (0806) Height: 9″ Capacity: 3 Tons
$374.55$561.75Mo-Clamp 0808 Maxi Tac-N-Pull
$374.55$561.75 -
Mo-Clamp 1000 Handy Hook
MO-Clamp 1000 Handy Hook – A great time saver with Mo-Clamp’s easy hook-up system. No chain is too long and no hooks are needed on the chain. Alloy heat-treated steel. Pulling slots can be used with #0900 Hole Pull Adapters. Designed for use with 3/8″ chain.
Overall Length: 6″ (165 mm) Capacity: 5 tons (4,536 kg) Heat Treated Steel. Made in the U.S.A.
$89.03$113.05Mo-Clamp 1000 Handy Hook
$89.03$113.05 -
Mo-Clamp 1100 Handy Link
MO-Clamp 1100 Handy Link – Chain too long? Make it shorter! Chain to short? Make it longer! Alloy heat-treated steel. Pulling slots can be used with #0900 Hole Pull Adapters. Designed for use with 3/8″ chain.
Overall Length: 6-1/2″ (165 mm) Capacity: 5 tons (4,536 kg) Heat Treated Steel. Made in the U.S.A.
$104.67$132.92Mo-Clamp 1100 Handy Link
$104.67$132.92 -
Mo-Clamp 1150 Chain Spreader Bar
MO-Clamp 1150 Chain Spreader Bar – The Chain Spread Bar enables the body man to make pulls around box rails or other obstacles, while maintaining the distance between pulling clamps.
Overall Length: 11″ (280 mm) Capacity: 5 tons (4,536 kg) Heat Treated Steel. Made in the U.S.A.
$116.96$159.13Mo-Clamp 1150 Chain Spreader Bar
$116.96$159.13 -
Mo-Clamp 1200 Twin Pull
MO-Clamp 1200 Twin Pull – Do you have need for a light pull but a larger gripping area? The Twin Pull enables you to use two clamps side by side for more pull. Also, can be used with two #1300 Sill Hooks. Designed for use with 3/8″ chain.
Overall Length: 5″ (127 mm) Width: 3″ (76 mm) Between Pulls Capacity: 6 tons (5,443 kg) Heat Treated Steel. Made in the U.S.A.
$96.32$131.05Mo-Clamp 1200 Twin Pull
$96.32$131.05 -
Mo-Clamp 1250 Panel Puller
MO-Clamp 1250 Panel Puller – The Panel Puller is light and easy to use with a slide hammer or pulling post. Use the Panel Puller on fender openings, deck lids, door posts and other openings. Heat-treated alloy steel.
Overall Length: 8″ (203 mm) Width: 3″ (82 mm) Capacity: 3 tons (2,722 kg) Heat Treated Steel. Made in the U.S.A.
$93.59$127.34Mo-Clamp 1250 Panel Puller
$93.59$127.34 -
Mo-Clamp 1255 Large Panel Puller
MO-Clamp 1255 Large Panel Puller – A perfect companion to the smaller 1250, the large panel puller allows the technician to increase the length of contact when pulling a panel into shape. Made of Mo-Clamp Tru-tuff steel alloy, this tool will last a lifetime and is covered by the Mo-Clamp “Forever” warranty. Use it in any situation where you need to get behind a pull. Made in USA.
Capacity: 3 tons (2,722kg) Length: 9″ (22.86cm) Pulling Surface: 4.75″ (12.06cm)
$144.23$211.33Mo-Clamp 1255 Large Panel Puller
$144.23$211.33 -
Mo-Clamp 1300 Sill Hook
MO-Clamp 1300 Sill Hook – One of the handiest tools in the shop for a quick pull almost anywhere. New round opening allows for pulling with a slip hook. New casting process makes for a tighter grain structure, resulting in more strength. The original straight-cut tooth design pattern is machined for superior gripping and pulling power. Sill Hook end is 2-1/2″ wide.
Gripping Surface: 2-1/2″ wide (63 mm), 1″ deep (25 mm) Overall Length: 8-1/2″ (216 mm) Capacity: 5 tons (4,536 kg) Heat Treated Steel. Made in the U.S.A.
$137.56$201.56Mo-Clamp 1300 Sill Hook
$137.56$201.56 -
Mo-Clamp 1320 Slim Line Sill Hook
MO-Clamp 1320 Slim Line Sill Hook – Use this new hook from Mo-Clamp to pull front hinge pillars, center pillars posts, rear hinge sections or any location where you need a broad, thin pulling surface. Made from Mo-Clamp Tru-Tuff drop-forged, heat-treated alloy steel with a pulling capacity of a full 4 tons. Heavy duty eye nut allows easy connection with Mo-Clamp chain and slip hooks.
Throat Depth: 4-3/4″ (107 mm) Overall Length: 11-1/2″ (248 mm) Capacity: 2.5 tons (2,268 kg) Heat Treated Steel. Made in the U.S.A.
$331.74$497.55Mo-Clamp 1320 Slim Line Sill Hook
$331.74$497.55
